• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.298-301
• /
• 1990

This paper presents technologies to improve the control of an impact wrench. Impact wrench is a tool which is held by the electro-mechanical manipulator and used to fasten and loosen the bolts for remote maintenance of equipment in hostile environment. Vision system was developed to measure the distance and improve the positioning of the impact wrench. The vision system used two laser beams with a CCTV camera. Also, a torque adjusting method was developed to limit the fastening torque.

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.553-560
• /
• 2022

This study investigates improvement of torsional strength of special wrench for K-series self-propelled howitzer power-pack maintenance. In order to maintain the power-pack, special wrench is one of the essential tools for assembling/disassemblimg the engine and transmission. However, failures(plastic deformation, fracture phenomenon and etc.) have been frequently reported even though special wrench was used within recommended standard torque range. Therefore, in this study, finite element analysis using ABAQUS was performed and modification of design parameters have been proposed. Prototypes based on the proposed parameters were manufactured and torsional experiment(torque about 130 % of recommend maximum torque) validated the newly proposed design parameters. Special wrench based on this study is applied to mass production and currently used for the maintenance.

• 대한치과보철학회지
• /
• 제54권1호
• /
• pp.8-13
• /
• 2016

목적: 본 연구의 목적은 두 가지(스프링형, 마찰형) 종류의 기계식 임플란트 토크 렌치를 2000회의 반복 사용과 100회의 멸균과정 후 그들의 정확도를 평가하는 것이다. 재료 및 방법: 각기 다른 5개 제조사의 스프링형, 마찰형 기계식 임플란트 토크 렌치가 각 15개씩, 총 30개 사용되었다. 디지털 토크 측정기(MGT-12, Mark-10 Corp, USA)를 이용하여 토크값을 실험 전 최초 측정 후 각 토크 렌치를 같은 조건(목표 토크 값까지 20회씩 반복 사용 후 멸균봉투에 포장하여 고압증기 멸균 시행)으로 100회 반복 시행하였다. 그 후 다시 토크값을 측정하여 비교하였다. 수집된 자료는 SPSS 통계분석 프로그램을 이용하여 분석하였고 오차율을 계산하였다. Mann-Whitney-U test를 이용하여 실험군 사이의 유의성을 분석하였다(P<.05). 결과: 스프링형 토크 렌치는 실험 전후로 토크값의 유의할만한 차이를 보이지 않았다(P>.05). 반면에 마찰형 토크 렌치는 실험 전후로 토크값의 유의할만한 차이를 나타내었으며(P<.05), 10% 이상의 오차율이 모두 마찰형 토크 렌치에서 나타났다. 결론: 본 연구의 제한된 실험 조건하에서 스프링형 토크 렌치가 마찰형 토크 렌치보다 사용횟수와 멸균과정을 고려했을 때 더욱 신뢰성이 높은 정확도를 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권6호
• /
• pp.162-170
• /
• 2010

토크쉬어볼트의 토크계수는 환경요인에 의해 영향을 받는다. 습기, 녹, 시공중의 작업성 등. 토크쉬어볼트의 토크계수의 변동에 기인하여 볼트에 도입된 축력을 예측하는 매우 어렵다. 이런 이유로 시공중인 볼트 축력을 측정하고, 체결력을 검증하는 것은 필수적이다. 이 연구에서, 볼트에 도입된 하중을 확인하기 위해 시작품 제작이 계획되었다. 시작품의 알고리즘은 토크쉬어 전동렌치에서 얻은 전기에너지와 유압축력기에서 얻은 축력과의 상관관계를 구성한 것이다. 직접축력을 계측하는 회귀분석식은 미니탭 프로그램을 이용한 통계학적인 분석방법에서 구한 것이다. 이 시작품은 상용 토크렌치에 견줄만한 인장력을 평가하는 신뢰성이 있는 도구라고 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.373-378
• /
• 2013

Impact wrench has a sophisticated structure to implement various pre-designed mechanisms with specific functions. In the structure of impact wrench, the gear box has an important role to generate impacting force of anvil from actuating torque. Since, it requires to design systematically the gear box for accurate mechanism of operation and transferring motions. In this paper, a methodology of dynamic analysis, which is useful to design mechanical system, is proposed and applied to impact wrench, sequentially. At first, the way to perform dynamic analysis for design, which is progressed from component to assembled system, is introduced. Secondly, the proposed methodology is applied to designing impact wrench. Eventually, the results of parameter study with proposed methodology are applied to actual design for design optimization. And optimized-design is evaluated in the view of accurate operation and structural stability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.850-853
• /
• 2006

This paper presents a primary study for a new method of enhancing measurement using impedance analysis method, which is widely used for structure health monitoring. Many of skyscrapers, bridges, tunnels, which have been built up several years, and nearly reached their operating life due to aging crack, material deterioration, and so on. therefore, the health monitoring technique has obtained considerable attention. The usage of the PZT sensor is proposed, and the coupling torque of bolt-connection overlapping beam is assumed. By using the torque wrench, it is easy to apply torque of different values to each bolt. The coupling torque is adjusted gradually from $3N{\cdot}m\;to\;0N{\cdot}m$ with the decrement of $1N{\cdot}m$. Simultaneously, the impedance peak variation is measured. The peak frequency variation can be determined through the change of bolt coupling torque.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.26-31
• /
• 2004

일반적인 공업 제품은 다수의 부품들로 이루어져 있다. TV 등과 같은 가전제품은 천여개, 자동차는 만여개, 그리고 항공기는 십만여개의 부품으로 구성된다. 여러 개의 부품은 다양한 방법으로 조립되어 완제품을 이룬다. 자동차의 제조와 같은 기계공업 분야에서 가장 일반적인 조립방법은 볼트 또는 나사를 이용하는 방법이다.(중략)

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.223-231
• /
• 2003

Statement of problem : Little is known about the effect of a counter-torque device and the internal hexagon of abutment on the tightening torque transmitted to the implant. Purpose : The purpose of this study was to examine the effect of a counter-torque device and the internal hexagon of abutment on the tightening torque transmitted to the implant. Material and Methods : In this study, three types of abutment were used, (1) two-piece conical abutment with hexagon, (2) two-piece conical abutment without hexagon, and (3) one-piece conical abutment without hexagon. The experimental groups were divided into five groups according to the type of abutment and the usage of a counter-torque device. Group I : two-piece conical abutment with internal hexagon was tightened without the use of a counter-torque device. Group II : two-piece conical abutment without internal hexagon was tightened without the use of a counter-torque device. Group III : one-piece conical abutment without internal hexagon was tightened without the use of a counter-torque device. Group IV : two-piece conical abutment with internal hexagon was tightened with the use of a counter-torque device Group V : two-piece conical abutment without internal hexagon was tightened with the use of a counter-torque device. Abutments were tightened 20Ncm torque with the use of manual torque wrench and then torque values were measured by torque-gauge. After the measurement of torque values, all groups were loosened with the use of manual torque wrench and then detorque values were measured by torque-gauge. Results : The results were as follows. 1. There were no differences in torque values among three types of abutment. 2. Regardless of the existence of the internal hexagon of abutment, a counter-torque device decreased the tightening torque transmitted to the implant about 92% 3. In group III showed the highest detorque value, however there were no differences among group I, II, IV and V. Conclusion : Within the limitations of this study, it was concluded that the internal hexagon of abutment has no effect on the tightening torque transmitted to the implant and the detorque value of abutment screw. The use of a counter-torque device is essential to prevent microfracture on the implant-bone interface but has no effect on preload.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.226-230
• /
• 1996

A small amount of fine particle graphite was added to $\alpha$-SiC and $\beta$-SiC having certain particle distributions, and they were mixed clay and frit. After forming, they were sintered at 140$0^{\circ}C$ for 3 hours. Tribological properties of sintered $\alpha$-SiC-$\beta$-SiC-graphite-clay (frit) system showed that kinetic friction coefficient was 0.108, specific wear rate was 1.3${\times}10^-8\;mm^2$.$kgf^1$, and torque was 0.01kgf.cm at the wrench torque of 100 kgf.cm.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.