• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.897-913
• /
• 2004

There has been continuous efforts to manage the water resources for the required water quality criterion at river channel in Korea. However, we could not obtain the partial improvement only for the point source pollutant such as, wastewater from urban and industrial site through the water quality management. Therefore, it is strongly needed that the Best Management Practice(BMP) throughout the river basin for water quality management including non-point source pollutant loads. This problem should be resolved by recognizing the non-point source pollutant loads from upstream river basin to the outlet depends on the land use and soil type characteristic of the river basin using the computer simulation by distributed parameter model based on the detailed investigation and the application of Geographic Information System(GIS). Used in this study, Annualized Agricultural Non-Point Source Pollution (AnnAGNPS) model is a tool suitable for long term evaluation of the effects of BMPs and can be used for un gauged watershed simulation of runoff and sediment yield. Now applications of model are in progress. So we just describe the limited result. However If well have done modeling and have investigated of propriety of model, well achieve our final goal of this study.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.823-832
• /
• 2006

The Purpose of Similarity(Reproduction) Degree Appraisal is to determine the equality or similarity between two programs and it is a system that presents the technical grounds of judgment which is necessary to support the resolution of software intellectual property rights through expert eyes. The most important things in proceeding software appraisal are not to make too much of expert's own subjective judgment and to acquire the accurate-appraisal results. However, up to now standard research and development for its systematic techniques are not properly made out and as different expert as each one could approach in a thousand different ways, even the techniques for software appraisal types have not exactly been presented yet. Moreover, in the analyzing results of all the appraisal cases finished before, through a practical way, we blow that there are some damages on objectivity and accuracy in some parts of the appraisal results owing to the problems of existing appraisal procedures and techniques or lack of expert's professional knowledge. In this paper we present the model for the standardization of software-similarity-appraisal techniques and objective-evaluation methods for decreasing a tolerance that could make different results according to each expert in the same-evaluation points. Especially, it analyzes and evaluates the techniques from various points of view concerning the standard appraisal process, setting a range of appraisal, setting appraisal domains and items in detail, based on unit processes, setting the weight of each object to be appraised, and the degree of logical and physical similarity, based on effective solutions to practical problems of existing appraisal techniques and their objective and quantitative standardization. Consequently, we believe that the model for the standardization of software-similarity-appraisal techniques will minimizes the possibility of mistakes due to an expert's subjective judgment as well as it will offer a tool for improving objectivity and reliability of the appraisal results.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.11-23
• /
• 2015

Construction Management(CM) and Building Information Management(BIM) have a lot in common that they need to establish a cooperation system among different disciplines and promote smooth communication among project stakeholders throughout the project life-cycle. BIM can be an effective information management tool for CM's business and improve their service value. However, BIM uses by Construction Managers(CMr) are very limited. The objective of this study is to analyze the intention of CMrs to adopt BIM and establish effective BIM use strategy in the CMr's point of view. This study utilizes Technology Acceptance Model(TAM) as a research method, and the results show that 1) CMrs think it is more important whether BIM is required to be adopted in their business process at the social or industry level than that BIM can improve their personal competence, recognition, and impressions through their voluntary BIM adoption; 2) that CMrs think it is important to figure out business processes where BIM can be smoothly incorporated; and 3) that CMrs hesitate the use and trial of BIM in their realworld business although they agree that BIM needs to be eventually adopted in their business in the future. Based on these results, directions for establish a strategy for BIM adoption were proposed at the CMr's point of view

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.91-100
• /
• 2011

Green technologies of buildings are spreading for saving resource and energy consumption during life cycle of buildings. However, selection of optimized the technologies for applying projects is needed a lot of time and costs. Therefore prioritization is necessary to apply the technologies for buildings. An evaluation of economic value for the technologies is significant for prioritization of the technologies, however, the current evaluation system of economic value for technologies is not reflected the accurate features of the technologies. Green technologies have the objectives for reducing the emission of CO2 and saving the cost during the whole lifecycle of buildings. Thus the evaluation of economic feasibility for green technologies is needed to include the economic value from improving the environment. This paper developed the economic evaluation method integrated with LCC and LCA to accurately analyze the economic value for green technologies. Moreover, this paper drew the priority of the technologies by conducting case studies with the integrated method and analyzing the results with AHP. The conclusion of case studies, Green technologies is worth more if to include the economic value from improving the environment. Then in analysis of priority, Green intelligent component technologies were rated the highest. The conclusion of the study is able to utilize the supporting tool for making decision to select the optimized technologies for the projects and precedence study for developing future research of prioritization for green technologies. The future study for improving the developed method will supplement the various evaluation factors and apply the detailed weight to analyze the priority of green technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.182-192
• /
• 2010

This paper proposes the hardware IP design of JBIG2 encoder. In order to facilitate the next generation FAX after the standardization of JBIG2, major modules of JBIG2 encoder are designed and implemented, such as symbol extraction module, Huffman coder, MMR coder, and MQ coder. ImpulseC Codeveloper and Xilinx ISE/EDK program are used for the synthesis of VHDL code. To minimize the memory usage, 128 lines of input image are processed succesively instead of total image. The synthesized IPs are downloaded to Virtex-4 FX60 FPGA on ML410 development board. The four synthesized IPs utilize 36.7% of total slice of FPGA. Using Active-HDL tool, the generated IPs were verified showing normal operation. Compared with the software operation using microblaze cpu on ML410 board, the synthesized IPs are better in operation time. The improvement ratio of operation time between the synthesized IP and software is 17 times in case of symbol extraction IP, and 10 times in Huffman coder IP. MMR coder IP shows 6 times faster and MQ coder IP shows 2.2 times faster than software only operation. The synthesized H/W IP and S/W module cooperated to succeed in compressing the CCITT standard document.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.535-545
• /
• 2019

The PBA of ship weapon system should be installed and operated under harsh environmental conditions and so it should be highly reliable to endure the mission profiles during its entire lifetime. In the case of PBA failure during operation, rapid maintenance is highly likely to be difficult due to problems such as supply of parts, which can have a devastating effect on the mission. In order to validate the reliability of PBA, a series of tests are performed with PBA samples, but they require time, testing facilities, samples, expenses and failure analysis if failed. The reliability of PBA is predicted on the basis of specifications such as MIL-HDBK-217F, but this specification does not take into account failure mechanisms for specific design details, environment and usage, interconnects and its characteristics that drive many failures of PBA in the field. Therefore, this study predicts the reliability of PBA using an RPA tool and proposes the RPA methodology as a validation process at the design stage. With RPA, it is now possible to achieve design validation including inherent failure mechanism, identification of weakest link, alternative design options, and test plan development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.189-199
• /
• 2017

This study investigated the effects of life stress, cultural adaptation stress, and academic satisfaction amongst a total of 283 20's Chinese students majoring in cosmetology at colleges in Seoul. For this, data was collected from February to March 2017. The frequency analysis was conducted to verity the general characteristic of Chinese student studying in Korea who are study objects while utilizing SPSS Statistics V22.0 for data processing and analysis while the factor analysis and reliability analysis were conducted to investigate the validity of measurement tool and evaluate the reliability. Moreover, the regression analysis between variables and regression analysis were utilized. The results found the following: First, in terms of life stress, as peer relationship, appearance stress, economic stress, family relationship stress and academic stresses decreased, their academic satisfaction increased. Second, regarding cultural adaptation stress, as interpersonal and living culture stresses were lowered, academic satisfaction increased. Therefore, this study targets to derive implications on an efficient plan to improve the academic satisfaction of Chinese students studying in the Republic of Korea by developing and providing a proper academic program with a decent support system in terms of culture, life, and education after investigating their life and cultural adaptation stresses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2020

The purpose of this study is to analyze the needs for developing a curriculum for strengthening the long-term care service expertise and job competency. Specifically, the researchers analyzed previous studies on national long-term care services and national policy data, and conducted focus group interviews with 14 experts from related agencies. Activity theory was applied as a framework for analysis and a questionnaire about the importance and difficulty of subjects from 25 long-term service employees was administered for validating the results of the qualitative data analysis. The upper part of the subject-goal-tool of the activity system was considered the main area of action, and the following rule-community-division was divided into contextual parts for action, and the implications for demand analysis and future operation of the online curriculum are summarized. In total, six courses were required for development. These courses could be applied to as a learner-centered flip learning for long-term care service workers and various educational methods of collective education and supplementary education have been proposed. Based on the study results, implications in the educational field for effective management of courses were suggested at the end of the study.

• The Korean Journal of Financial Management
• /
• v.26 no.1
• /
• pp.95-125
• /
• 2009

This paper examines the disciplinary effect of deposits using the semiannual accounting data of mutual savings banks(henceforth 'MSBs') in Korea for the period of 2003 through 2007. I find overall strong evidence in favor of the existence of market discipline in the industry. MSBs with higher BIS ratio and lower NPL ratio turn out to have higher increase rate of deposits than MSBs with lower such ratios. The coefficient of NPL ratio becomes greater with time, suggesting that the effect is cumulative. It turns out that depositors respond more sensitively to NPL ratio than BIS ratio in a period of MSB failure. On the other hand, MSBs turn out to act very positively responding to the depositors' discipline. They increase BIS ratio or decrease NPL ratio following the previous decrease in deposits. Government authorities need to make more efforts to develop a suitable incentive system (e.g. penalties on a false disclosure) to improve the efficiency of disclosure by MSBs. Moreover, they need to acknowledge the importance of NPL ratio as a market disciplinary tool which has been becoming more important, especially in times of MSB failure.

• Journal of Distribution Science
• /
• v.12 no.12
• /
• pp.55-63
• /
• 2014

Purpose - In urban regeneration projects, considerations for rejuvenating traditional public markets are becoming increasingly important. That is because the traditional market is not just a commercial space but also a living center for local people's existence. Cultural contents like these are invaluable assets in the contemporary economy. However, traditional markets are gradually declining because of changes in distribution systems and consumer lifestyles. New distribution systems such as modern distribution markets, home shopping, and online shopping malls made traditional markets less competitive. Further, traditional markets have not been able to adapt to the changing consumption styles of younger generations. Some say that it is a natural phenomenon that cannot be stopped. However, traditional markets are not just another distribution system but also a valuable resource that encapsulates the local people's tradition and history. Thus, a revitalization strategy for traditional public markets has become an urgent task in contemporary urban regeneration projects. This study aimed to find ways to activate traditional public markets by making it a community landmark based on visual merchandising perspectives. Research design and methodology - This study focused on analyzing Granville Island (Vancouver, Canada) as a role-model project for rejuvenating the traditional market. It investigated Granville Island both with walk-through evaluation and literature reviews. Results - We found that it has been developed not only to improve visual aspects, but also to promote cultural contents with high value added. For example, the developers maintained the visual elements that tell the original history of the site as an industrial factory. The renewal project had a balance between improving the outer look and creating attractive contents. The following are the merits of Granville Island that Korean traditional markets should note. First, they kept the whole area clean and hygienic. Second, merchants are well educated, business-savvy, and consumer-oriented. Third, the area's total environmental designs were done by professionals of a high caliber. Fourth, the city government and the merchants'association were collaborating well in their efforts to accommodate the changing needs of consumers. Conclusions - This study made the following suggestions as a conclusion. First, it will be a very powerful tool to rejuvenate the traditional market if we can discover unique cultural resources and develop them as cultural products, experiences, and events. Consumers of the 21st century have a strong tendency to consume not only material products, but also the experiences and memories attached to them. Second, in order to maintain the unique characteristics of traditional markets, fostering the viability of the merchants' association and local residents' society would be essential. Third, it is necessary to make the traditional market into a cultural place not only for the shopping patronage of local residents, but also for attracting tourists to increase sales. Finally, professional management and design approaches are needed in order to make the traditional market a pleasant space from a visual merchandising standpoint.