• Applied Microscopy
• /
• 제36권3호
• /
• pp.209-216
• /
• 2006

투과전자현미경을 이용한 3차원적 구조분석의 신뢰도를 향상시키기 위해서는 고니오미터와 사용되는 시료 홀더에 대한 정확도와 정밀도의 측정 및 보정이 필요하다. 본 연구에서는 상업용 투과전자현미경 홀더 중의 하나인 rotation holder에 대한 작동원리를 기술하고 회전각의 정확도를 측정하였다. 투과전자현미경 내부에서 회전된 이미지의 분석을 통한 홀더의 회전각의 측정오차는 ${\pm}0.42^{\circ}$이었다. 회전각의 정확도를 비교하기 위해 투과전자 현미경 외부에서 시료 홀더에 부착된 반사경에 레이저 빔을 반사시켜 측정한 결과, 회전각의 측정오차는 ${\pm}0.6^{\circ}$이었다. 추가적으로 시료컵과 회전벨트 사이의 불안정한 맞물림에 의해 야기된 비정상적인 시료의 회전경로에 대해서도 점검하였다.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.60-68
• /
• 2008

The tool overhang length affects tool deflection and chatter that should be reduced for machined surface quality, productivity and long tool lift. The shortest tool setting algorithm that uses a safe space is proposed and applied with simulation software in NC machining. The safe space in the coordinate fixed in the tool is computed by the virtual machining system that simulates NC machining by stock model, tool model and NC code. The optimal tool assembly that has largest diameter and shortest length is possible using the safe space. This algorithm has been applied over fifty companies for safe and rigid tool setting. The collision accident between holder and stock was reduced from 3 to 0 a year and the productivity was incensed about 15% by using faster feed rate acceptable for shorten tool length.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.9-14
• /
• 2007

In this paper, a rotating tool clamping device was developed based on a shape memory alloy(SMA) and its feasibility as a tool holder was experimentally explored. The SMA-based device was able to alter clamping to unclamping through temperature control within 1 second. The means and repeatability(${\sigma}$) of the tool clamping force were 185.5N and 6N respectively and its drifts were less than 3% for an hour. Considering the temperature hysteresis of the SMA-based tool clamping device, it is necessary to heat the SMA ring to around $50^{\circ}C$ after tool change to obtain more clamping force.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.136-142
• /
• 1996

Automatic monitoring of cutting process is one of the most important technology in machining. AE sensing technology has been applied to monitoring process and proved to be effective in detecting tool abnor- malities such as tool wear and fracture. In this experimental study. AE signals were detected from the tool holder for continuous and interrupted cutting, which obtained from changing workpice material configuration, under control of constant cutting speed from CNC lathe. From statistical and frequency analysis, the AE signals were analyzed to obtaining the characteristics of continuous and interrupted cutting conditions and tool failure. The Kurtosis values decreased but RMS voltages increased as the cutting speed increased, in both continuous and interrupted cutting. RMS voltage is suddenly increased but Kurtosis value is suddenly decreased when tool failure condition. Power spectrum density of AE signals when tool failure reaches extreme value around 0.065 cycles/ .mu. m.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.591-596
• /
• 1999

Due to the development of CNC machining centers and the complexity of machined part geometry, the ball-end milling became the most widely used the cutting process. Generally, the tool runout defined as the eccentricity of a rotating tool set in the holder involved the spindle runout and the problem of tool runout generated to remove the workpiece is a main factor affecting the machining accuracy. In this paper, the relationship of tool runout(zero-to-peak, P-K) and surface shape on the change of cutting conditions is studied and it is proposed the probability of prediction of surface shape from the in-process tool runout measurements with high response displacement sensor in the ball-end milling

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.3-8
• /
• 2002

An intelligent polishing robot automation system is developed. Automatic Tool Change System(A.T.C.), Tool Posture Angle Control, and Robot Program for Polishing Application are developed and integrated into a robotic system that consists of a robot, pneumatic finding tool, and finding abrasives (papers and special films). A.T.C. is specifically designed to exchange whole grinding tool set for complete unmanned operation. Tool Posture Angle Control is developed to give a certain skew angle rather than right angle to tools on the surface for best finishing results. A.T.C. and Tool Posture Angle Control is controlled by a PC and the robot controller. Also, there have been some considerations on enhancing the performance of the system. Some elastic material is inserted between the grinding pad and the holder for better grinding contact. The robot path data is generated automatically from the NC data of previous machining process.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1092-1096
• /
• 1988

본 연구에서는 생산관리 정보와 기술정보를 동시에 처리하는 생산정책(produ- ction strategy)인 컴퓨터 통합제조(CIM:Computer Integreated Manufacturing)를 위한 공구 관리 시스템(tool management system)의 개발에 관한 것으로 대상 공구는 NC 선 반공구로 제안하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.153-157
• /
• 2002

본 연구에서는 선반가공에서 일반적인 선반작업 후 밀링이나 드릴링 가공이 가능한 복합가공기의 역할을 한번에 수행할 수 있는 CNC 공구터렛의 홀더 주축에 대한 수학적 모델링을 통하여 시스템의 횡진동 및 비틀림 진동 해석으로 발생할 수 있는 진동 문제에 대처할 수 있는 방안을 제시 하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.455-456
• /
• 2007