• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.413-421
• /
• 2012

The main purpose of this study is to present practical data for the development of the health enhancing programs for the dental hygiene students. This data is based on the investigation of the psychosomatic self-reported symptoms of the dental hygiene students. Out of the random selection of the current dental hygiene students in Gyeonggi-do and Gangwon-do districts. We conducted a survey and analyzed the collected data from 432 respondents. The results are as follows: 1. The mental appeals (19.37) were higher then the physical appeals (17.53) and of the items in psychosomatic symptoms, the point of mental instability the highest (21.85); whereas, that of mouth and anal scored the lowest (14.59). 2. In terms of the religion, statistical significance was shown among physical appeals (p<.01), mental appeals (p<.05), multiple subjective symptom (p<.01), digestive organs (p<.01), aggressiveness (p<.01), nervousness (p<.01), and eye and skin (p<.05), mental instability (p<.05). 3. Concerning the living conditions, Statistical significance was found on the items such as physical appeals (p<.05), mental appeals (p<.01), depression (p<.001), irregular and life (p<.001), multiple subjective symptom (p<.01), lie scale (p<.01) and mouth and anal (p<.05), digestive organs (p<.05). 4. As for regular health check-ups, statistical significance was shown in the following items such as mental appeals (p<.05), depression (p<.01), multiple subjective symptom (p<.05), mental instability (p<.05).

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.757-769
• /
• 2013

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater, identified as Bacillus velezensis by analyses of 16S rDNA and partial sequences of the gyrA, and designated as B. velezensis A-68. The optimal conditions for production of CMCase by B. velezensis A-68 were established using response surface methodology (RSM). The optimal concentrations of rice hulls and yeast extract, and initial pH of the medium for cell growth were 60.2 g/l, 7.38 g/l, and 7.18, respectively, whereas those for production of CMCase were 50.0 g/l, 5.00 g/l, and 7.30. The analysis of variance (ANOVA) implied that the most significant factor for cell growth as well as production of CMCase was yeast extract. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ in the medium for cell growth were 7.50, 1.00, 0.10, and 0.80 g/l, respectively, which were the same as those for production of CMCase. The optimal temperatures for cell growth and production of CMCase were 30 and $35^{\circ}C$, respectively. The maximal production of CMCase under optimized conditions was 83.8 U/ml, which was 3.3 times higher than that before optimization. In this study, rice hulls, agro-byproduct, were developed as a substrate for production of CMCase and time for production of CMCase was reduced to 3 days using a newly isolated marine bacterium.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.813-823
• /
• 1998

The frictional force has been considered as an harmful factor in an active unit where tooth movement occurs, but as an advantageous factor in anchor unit that resist tooth movement. That is, efficient tooth movement is planned by using ligation methods that have low levels of bracket-wire frictional force and the anchorage control can be achieved by using ligation methods that have high levels of bracket-wire frictional force that result in binding of the bracket accompanied by little or no tooth movement. The purpose of this study was to evaluate the frictional force generated between bracket and wire in accordance with the methods of ligation, the material of ligation and the passage of time under artificial saliva. Tested were 0.017x0.022 inch stainless steel wires in standard edgewise twin brackets for upper central incisors in a 0.018-inch slot. The wires were ligated into the brackets with elastomeric modules and stainless steel ligatures. Whole tie, half tie, twisting tie and double overlay tie were done with elastomeric modules. With 0.009-inch stainless steel ligature whole tie and half tie were done by needle holder and whole tie by ligature tying plier. With 0.012-inch stainless steel ligature whole ties were done by needle holder. Whole tie groups of elastomeric module were kept in artificial saliva bath at $37^{\circ}C$ for 28 days. The frictional force was recorded by means of an Instron universial testing instrument (4202 INSTRON, Instron Co., U.S.A.) at initial, 7, 14, 21, and 28 days. The results for ligated samples in a simulated oral environment revealed the fellowing : ${\cdot}$In elastomeric module whole tie, 28 days group was significantly greater mean static frictional force than any other group but there were no significant differences among any other group (p>0.05). ${\cdot}$Elastomeric module twisting ties were significantly greater mean static frictional forces than any other ligation method but there were no significant differences between twisting tie and double overlay tie (p>0.05). Twisting tie, double overlay tie, whole tie, half tie showed differences in decreasing order. ${\cdot}$Stainless steel half tie produced lower mean static frictional force than whole tie, ligation by ligature tying plier produced greater mean static frictional force than by needle holder and ligation with 0.012-inch stainless steel ligature produced greater mean static frictional force than with 0.009-inch stainless steel ligature (p<0.05). ${\cdot}$There were no significant differences between the mean static frictional forces of elastomeric whole tie and stainless steel whole tie (p>0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.286-293
• /
• 1993

This study was carried out to determine the effects of the fertilization levels and oversowing treatment on liveweight gain of glazing cattle, changs of botanical composition, and dry matter(DM) yield in tall fescue dominant mixed pasture during the grazing period. The treatments were T$_1$(low fertilizing; 120-100-100 kg/ha), T$_2$(medium fertilizing; 280-200-200 kg/ha) and T$_3$(medium fertilizing+oversowing). The botanical composition of tail festuce was increased in T$_1$ and that of tall fescue, orchardgrass and pernnial ryegrass in T$_3$ was 30.5%, 23.8% and 24.1%, respectively. The total forage DM yield was the highest in T$_3$, and the average stocking rate (animal unit; AU) per day during the grazing period in T$_1$, T$_2$ and T$_3$ was 2.4 AU. 3.0 Au and 3.3 AU, respectively. The total grazing days (animal unit day; AUD) in T$_3$(664 AUD) was higher than that of T$_1$, and T$_2$. There is no significant difference in average daily liveweight gain per head among the treatments but daily liveweight gain per ha in T$_3$ was higher than that of T$_1$, and T$_2$. The total liveweight gain per ha during the grazing period in T$_1$, T$_2$ and T$_3$ was 601kg. 762kg and 877kg, respectively. The herbage consumption per day per 100kg LW was similer among the treatments but crude protein, P, K and Ca contents in herbage were increased with medium fertilization levels(T$_2$) and with oversowing(T$_3$).

• Journal of Embryo Transfer
• /
• v.17 no.3
• /
• pp.227-234
• /
• 2002

This study was performed to investigate the improvement of the pregnancy rate of Al or clone embryo transfer on hCG administration in Korean Native heifer. A total of 42 heifers were treated with control, CIDR(withou E2 capsule). hCG after 7 day of hi, the pregnancy rate were spewed 53, 46, 71%. These results were significant different among the treatments(P<0.05). When the hCG were adminstrated at cloned embryo transfer, pregnanacy rate were control, hCG 5.8%, 10.4% respectively and there was no significant different between treatments. Plasma P4 concentration of hCG treatment in heifers were 3 times higher than control on 13~16 day after heat. After this, plasma P4 concentration of CIDR and hCG treated heifers were kept the 2~3 times levels. IGF-I concentration were showed no differences between pregnancy and non-pregnancy. hOG and CIDR. IGF-II concentration were revealed the differences between pregnancy and non-pregnancy in CIDR group but there was no differences in hCG administration group. Plasma cortisol were high at heat and 16 day after heat and CIDR treated group was higher than the other group. These results suggest that hCG administration was improve the pregnancy rates on Al and cloned ET, accompanying the incline of P4 concentration.

• Korean Journal of Weed Science
• /
• v.7 no.3
• /
• pp.265-279
• /
• 1987

About 140 weed species belonging to 42 families occurring in summer were observed in Ulreung island. The Compositae was the most wildely occurring family covering 27 weed species, followed by 21 species in Graminae, 9 in Polygonaceae, 7 in Leguminosae, and 7 in Labiatae etc. In terms of the lands classified, about 60 species in 26 families were observed in the cultivated and the medical crops grown areas, respectively, and 116 species in 40 families occurred in the non-cultivated land like the vicinity of the cultivated area and 94 species in 34 families in the valley. No. of species and families were much greater in the non-cutivated land than those of the cultivated one. The most dominant weed species in both the cultivated and its vicinity in Ulreung island were Digitaria sanguinalis, followed by Portulaca oleracea, Polygonum hydropiper, Equisetum arvensis, Artemisia princeps, Commetina communis, Setaria viridis in order. Community analysis was done by the method of Toyohara in two cultivated lands such as the general crop land and the medical herb crop grown land, and two non-cultivated areas such as the vicinity of the cultivated land and valley. The cultivated land consisted of the communites of P. hydropiper and Cyperus amuricus, including Bidens tripartita in P. hydropiper community. The medical crop grown land composed of three major communities like P. hydropiper, Amaranthus mangostanus and Sonchus asper in which A. mangostanus and S. media were presented in the ecoton, indicating community being transiting. In the non-cultivated areas like the vicinity of crop land, the communities of Erigeron annuus, P. oleracea, and Oxalis corniculata were dominant, and Dystaenia takeshimana was included in the community of E. annuus and Stellan'a aquatica in P. oleracea community. In the valley, Ranunculus quelpaertensis community was existed in between the communities of Sonchus asper and Plantago asiatica.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.236-244
• /
• 2011

Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.19-28
• /
• 1994

The effects of gonadoropin-releasing hormone (GnRH) and ovarian steroid hormones on the release of luteinizing hormone (LH) and its subunit mRNA levels were investigated in anterior pituitary cells in culture. LH concentration was measured by a specific radioimmunoassay and mRNA levels of u and $LH{\beta}$ subunits by RNA slot blot hybridization assay. GnRH stimulated LH release in a dose-dependent manner from cultured pituitary cells. However, the basal LH release in the absence of GnRH was not changed during the course of 24h culture, strongly suggesting that release of LH is directly controlled by GnRH. The treatment of the pituitary cells with GnRH increased $LH{\beta}$ subunit mRNA levels in a dose-dependent manner, reaching the maximum with $2\;{\times}\;10^{-10}M$ GnRH while no significant increase in ${\alpha}$ subunit mRNA levels was observed after GnRH treatment. Estradiol did not augment GnRH-induced LH release while progesterone augmented GnRH-induced LH release in a dose-dependent manner at the level of pituitary. However, estradiol and progesterone increased basal and GnRH-induced $LH{\beta}$ subunit mRNA levels in a dose-dependent manner. The treatment of estrogen antagonist, LYI17018 blocked the effect of estradiol on GnRH-induced $LH{\beta}$ subunit mRNA levels in a dose-dependent manner while progesterone antagonist, Ru486 tended to block the effect of progesterone on GnRH-induced $LH{\beta}$ subunit mRNA levels. It is therefore suggested that GnRH Playa a major role in LH release and subunit biosynthesis by influencing the steady state $LH{\beta}$ subunit mRNA loves and ovarian steroid hormones modulate subunit biosynthesis via directly acting on pituitary gonadotropes.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.93-100
• /
• 1990

The optimum conditions of electric stimulation for electrofusion of protoplasts of petunia, carrot and soybean, and the effects of calcium, magnesium, protease, trypsin, triton X-100, concanavalin A, dimethyl sulfoxide(DMSO), glycerol monooleate and spermine on fusion frequency and/or viability of petunia protoplast were investigated. The optimum frequencies(Hz)-amplitudes(V/cm) of AC Pulse for protoplast pearl-chain formation were 10 kHz-20 V/cm and 1 MHz-60 V/cm for petunia, 100 kHz-40 V/cm and $1\;MHz-40{\sim}60\;V/cm$ for carrot, and $1\;MHz-40{\sim}80\;V/cm$ for soybean, respectively. The optimum condition of DC pulse treatment at the 1 MHz-60 V/cm-15sec treatment of AC for electrofusion of petunia protoplasts was 2.5 kV/cm-40 sec, and under this condition the fusion frequency and viability of protoplasts were 45 % and 10 %, respectively, Both of the protoplasts of carrot and soybean were not fused under the AC and DC conditions tested in this experiment. The electrofusion of petunia protoplasts was stimulated by calcium, and the fusion frequency and the viability of the protoplasts were 43 % and 11 % , respectively at the calcium concentration of 140 mM. Although fusion frequency was not affected by magnesium only, magnesium stimulated fusion frequency in the presence of calcium, and the viability and fusion frequency of petunia protoplasts were 45 % and 13 %, respectively, at 140 mM of magnesium-140 mM of calcium. The relative fusion frequencies of petunia protoplasts to the controls were increased by 2.4, 2.1, 1.6, 1.4, 1.8, 1.5 and 2.2 folds, respectively, by the treatments of protease, trypsin, triton X-100, concanavalin A, DMSO, glycerol monooleate, and spermine. The viabilities of petunia protoplasts were decreased by these substances.