• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.299-303
• /
• 1963

A method of the colorimetric determination of titanium has been developed, based on the fact (IV) forms a stable blue complex with methylthymolblue(MTB) which is suitable for spectrophotometric determination of titanium in the concentration range of 0.2 to 22 $\mu$g per ml as $TiO_2$. The determination was carried out in the solution of pH range of 2.6 to 3.6, and the absorbancy of complex was at 600m$\mu$ with Coleman spectrophotometer. Titanium forms a 1:1 complex with MTB, which has a molar absorptivity, $1.1{\times}10^4$ at 600m\mu$. The effects of hydrogen ion concentration, reagent concentration, stability of complex, and hydrolysis were studied. Most of cations do not interfere seriously; however, many of anions such as oxalate, citrate, phosphate, chloride interfere in this determination.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.561-564
• /
• 2006

$SnO_{2}$-doped anatase type $TiO_{2}$ powder was prepared by the polymerization complex route from tin(IV) bis (acetylacetonate) dichloride, titanium diisopropoxide bis (acetylacetonate) and polyethylene glycol (PEG) as a complexing agent. The structural changes of reaction mixture were monitored by fourier transform infarared (FT-IR) spectroscopy. The microstructure and morphology of gel powder were studied by field-emission scanning electron microscopy (FE-SEM) and X-ray diffractometry (XRD). The photocatalytic activity of these powders with the anatase structure was investigated by using indigo carmine solution.

• Journal of Powder Materials
• /
• v.12 no.4 s.51
• /
• pp.249-254
• /
• 2005

Titanium dioxide was prepared by Polymer Complex Solution Method(PCSM) according to the mole ratio of Titanium (IV) isopropoxide(TTIP)/solvent and polymer(Poly Ethylene Glycol). Polymer electrolytes were usually made by dispersing preproduced ceramic nanoparticles in a polymer matrix. Using this method, pure and nano-sized $TiO_2$ powder was synthesized through a simple procedure and polymer entrapment route. At the optimum amount of the polymer, the titanium ions are dispersed in solution and a homogeneous polymeric network is formed. The maximum intensity of anatase phase of $TiO_2$ was achieved by calcining at $500^{\circ}C$ for 2h. The synthesized $TiO_2$ powders were nano-sized and the average size was about 50nm. Anatase/Rutile ratio of the synthesized $TiO_2$ was 70%/30%.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.593-600
• /
• 2007

Aluminum was anodized in a $H_2SO_4$ solution, and titanium (IV) oxide ($TiO_2$) was electrodeposited into nanopores of anodic porous alumina in a mixed solution of $TiOSO_4$ and $(COOH)_2$. The photocatalytic activity of the prepared film was analyzed for photodegradation of methylene blue aqueous solution. Consequently, we found it was possible to electrodeposit $TiO_2$ onto anodic porous alumina, and synthesized it into the nanopores by hydrolysis of a titanium complex ion under AC 8-9 V when film thickness was about $15-20{\mu}m$. The photocatalytic activity of $TiO_2$-loaded anodic porous alumina ($TiO_2/Al_2O_3$) at an impressed voltage of 9 V was the highest in every condition, being about 12 times as high as sol-gel $TiO_2$ on anodic porous alumina. The results revealed that anodic porous alumina is effective as a substrate for photocatalytic film and that high-activity $TiO_2$ film can be prepared at low cost.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1620-1622
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.233-237
• /
• 2005

Cyclopentadiene compounds, 2-[CR'R(OMe)]-1,3-Me$_2C_5H_3$ (R, R' = 2,2'-biphenyl, 2) and 2-[CR'R(OSiMe$_3$)]-1,3-Me$_2C_5H_3$ (R, R' = 2,2'-biphenyl, 3; R = ph, R' = ph, 4; R = 2-naphthyl, R' = H, 5) are readily synthesized from 2-bromo-3-methoxy-1,3-dimethylcyclopentene (1). Reaction of the cyclopentadienes with Ti(NMe$_2$)$_4$ in toluene results in clean formation of the cyclopentadienyl tris(dimethylamido)titanium complexes, which are transformed to the trichloride complexes, 2-[CR'R(OMe)]-1,3-Me$_2C_5H_2$}TiCl$_3$ (R, R' = 2,2'-biphenyl, 6) and {2-[CR'R(OSiMe$_3$)]-1,3-Me$_2C_5H_2$}TiCl$_3$ (R, R' = 2,2'-biphenyl, 7; R = ph, R' = ph, 8; R = 2-naphthyl, R' = H, 9). Attempts to form C1-bridged Cp/oxido complexes by elimination of MeCl or Me$_3$SiCl were not successful. X-ray structures of 6, 7 and an intermediate complex {2-[Ph$_2$C(OSiMe$_3$)]-1,3-Me$_2C_5H_2$}TiCl$_2$(NMe$_2$) (10) were determined.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2737-2740
• /
• 2013

The layered $KTiNbO_5$ was successfully synthesized with titanium(IV) isopropoxide and niobium oxalate by a novel polymerized complex (PC) method. The morphology and structure of the as-prepared sample was characterized by means of High-Resolution Transmission Electron Microscope, powder X-ray diffraction, and Laser Raman Spectroscopy. The spectral response characteristic was recorded by using UV-vis Diffuse Reflectance Spectroscopy. Results show that $KTiNbO_5$ as-prepared by PC method presents an uniform morphology of nano-particles, the mean particle sizes is ca. 28 nm corresponding to the (002), and the crystal structure can be well indexed to the orthorhombic phase. The sample as-prepared by PC method has higher band gap energy than that of the sample prepared by a solid-state reaction method due to the quantum size effect.

• Clean Technology
• /
• v.18 no.1
• /
• pp.38-42
• /
• 2012

Photonic crystals (PCs) are highly ordered porous materials which have been much attention because of its potential for controlling the light sauces. There are many methods for synthesizing this kind of materials among them we chose the supercritical deposition. With this method the reactants can easily infiltrate into the complex structure. In this paper, supercritical carbon dioxide ($scCO_2$) was used as a reaction medium, which is known as a sustainable solvent due to its nontoxic and noninflammable characteristics. We coated the colloidal template with metal alkoxide by using $scCO_2$ and then obtained macro-porous inverse opals. The reaction was carried out at $40^{\circ}C$ and 80 bar. We synthesized two different inverse opals which called silica and titania inverse opals by use of tetraethyl orthosilicate (TEOS) and titanium isopropoxide (TTIP) as a precursor, respectively.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

Transparent, photocatalytic, and self-cleaning TiO2 thin film is developed by TiO2 sol-gel coating on glass and polycarbonate (PC) substrates. Acetyl acetone (AcAc) suppresses the precipitation of TiO2 by forming a yellowish (complex) transparent sol-gel. XPS analysis confirms the presence of Ti2p and O1s in the thin films on glass and PC substrates. The TiO2-sol is prepared by stabilizing titanium (IV) isopropoxide (TTIP) with diethylamine and methyl alcohol. The addition of AcAcsilane coupling solution to the TiO2-sol instantaneously turns to yellowish color owing to the complexing of titanium with AcAc. The AcAc solution substantially improves the photocatalytic property of the TiO2 coating layer in MB solutions. The coated TiO2 film exhibits super hydrophilicity without and with light irradiation. The TiO2 thin film stabilized by adding 8.7 wt% AcAc shows the highest photo-degradation for methylene blue (MB) solution under UV light irradiation. Also, the optimum photocatalytic activity is obtained for the 8.7 wt% AcAc-stabilized TiO2 coating layer calcined at 450 ℃. The thin-films on glass exhibit fast self-cleaning from oleic acid contamination within 45 min of UV-light irradiation. The appropriate curing time at 140 ℃ improves the anti-fogging and thermal stability of the TiO2 film coated on PC substrate. The watermark-free PC substrate is particularly beneficial to combat fogging problems of transparent substrates.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.64-69
• /
• 2006

A series of dinuclear half-sandwich titanium complexes with aryloxy substituent at titanium$[(\eta^5-cyclopentadienyl)(aryloxy)TiCl_2]_2[(CH_2)_n]$ (n=3, n=6, n=9) have been successfully synthesized and their styrene polymerization properties have been investigated. All complexes are characterized by $^1H\;NMR,\;^{13}C\;NMR$, elemental analysis, and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has beer conducted in the presence of MMAO. It was found that (i) all the prepared complexes were very effective catalyst for the production of SPS (syndiotactic polystyrene), (ii) the complex with the longest bridge between the two active sites exhibited greatest catalytic activity among the three catalysts, but produced SPS with the smallest molecular weight, (iii) the activities of dinuclear half-titanocens with aryloxy substitution at titanium metal were greater than those of the chloride substituted compounds. These results indicate that not only the nature of the bridge between the two active sites but also the property of substituents at the metal exert a significant influence on the polymerization behaviors of the dinuclear half-titanocene.