• Journal of Navigation and Port Research
• /
• v.31 no.2
• /
• pp.159-163
• /
• 2007

In this paper, we mainly analyze the performance of two ultra wideband communication systems, the classical Time Hopping Binary Pulse Position Modulation (TH-BPPM) UWB system and the Time Hopping Bipolar Pulse Amplitude Modulation (TH-BPAM) UWB system. The performance of TH-BPPM and TH-BPAM is analyzed in detail under an ideal AWGN channel and a correlation receiver. We use the power spectral density function to get the expression of BER of these two UWB systems. It yields simple and exact formulas relating the performance to the system parameters. The analysis shows that TH-BPPM suffers performance degradation with respect to TH-BPAM. Furthermore, we give the computer simulation of both data and image transmission and our simulation results also prove our theoretical analysis.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.219-224
• /
• 2004

In This paper, we have analyzed the power spectrum of DS-TH Ulhawideband (Direct Sequence-Time Hopping UWB) system which used pseudo-noise (PN) code. The DS-TH UWB system proposed in this paper multiplies the information signal with PN code to construct pulse train with random pattern and then the chips in pulse train are bundled into several groups to map to the particular value. The (+)/(-) pulse is tented in the time slot of frame by comparing a particular value with timing information that was stored in the lookup table. Thus, the energy spark (Comb Line) which is generated certainly in convantional system can be suppressed efficiently by PN code. And we knew that the proposed DS-TH UWB System even could have very smoothing power spectrum ctaracteristic without applying high speed Time-Hopping code.

• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.318-325
• /
• 2002

In this paper, the effects of the interference environments on the performance of the time hopping(TH) binary PPM impulse radio(IR) system are presented. Based on the monocycle pulse available within the frequency of 3.1~10.6 GHz permitted for application by FCC, a PPM-modulated TH IR system simulator was designed and followed by the analysis of the monocycle pulse characteristics as well as the system performance. Particularly for the evaluation of the system performance, the multiple access interference and the narrowband system interference signals were considered as the interference signals. Since the narrowband system interference signal has very narrow bandwidth and very large amplitude compared with those of IR system, the analysis of the IR system performance was implemented by considering the interference power and band fraction ratio of the narrowband interference signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.179-184
• /
• 2010

In this paper, we analyze and simulate the performance of RAKE receiver for ultra wide band (UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.603-610
• /
• 2008

In this paper, analytical methods for calculating the average probability of bit error of direct sequence pulse amplitude modulation ultra wideband (DS-PAM UWB) system and time hopping pulse position modulation ultra wideband (TH-PPM UWB) system are given. For the multi-user DS-PAM UWB system, the bipolar pulse amplitude modulation is used in order to achieve better performance. As we know, more attention is paid to the TH-PPM UWB systems recently. In this paper. we first introduce the accurate BER calculation methods of the multi-user DS-PAM UWB and TH-PPM UWB systems and then give the performance analysis over the ideal AWGN channel and a correlation receiver. Furthermore, we also introduce their applications in image transmission and data transmission and give the simulation results. The analytical method yields simple and exact formulas relating the performance to the system parameters.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.30-34
• /
• 2008

In this paper, we analyze the performance of pulse position modulation-time hopping ultra wide band (PPM-TH UWB) systems with antenna diversity technique in indoor wireless channel. A modified Saleh and Valenzuela (SV) model is adopted as a UWB indoor channel model. Perfect synchronization between a transmitter and a receiver is assumed. Therefore, coherent equal gain combining (EGC) scheme to collect the energy available in the multipath components is investigated. It is shown that the performance is improved by increasing the number of antennas at the receiver. The results of this paper can be applied to the applications of UWB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.139-147
• /
• 2003

In this paper we proposed system parameter values of M-ary PPM/TH(Pulse Position Modulation/Time Hopping) ultra-wideband systems having data rate of 100 Mbps for the frequency band, which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the AWGN channels. According to the results of performance analysis, It is observed that available pulse duration is very limitative for this system. In case of constant data rate, if M and the pulse repetition numbers are increased, then the system performance is improved and the user number is decreased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.951-957
• /
• 2005

The bit error probability of UWB Time-Hopping(TH) multiple access communication systems combined with BPSK is calculated with a high accuracy including the multiple user interference(MUI). This paper finds that with some manipulations, the TH-BPSK UWB signal can be modified to the similar form of the DS-CDMA signal. The MUI in the system is explained by the characteristic function technique. Above two descriptions have been bases on the derivation of the exact BER expression of the system. We also propose the approximate expression for the BER, which has enough accuracy compared with the expression from the Gaussian approximation of the MUI. The comparison of the results from the proposed expressions with the simulation results gives the confirmation for the validity and accuracy of the proposed expressions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.115-123
• /
• 2018

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1189-1197
• /
• 2006

Ultra-wideband(UWB) is a killer technology for short-range wireless communications. In the past, most of the UWB research focused on physical layer but the unique characteristics of UWB make it different to design the upper layer protocols than conventional narrow band systems. Cross-layer protocols have received high attention for UWB networks. In this paper, we investigate the performance of two physical layer schemes: Time Hopping Binary Pulse Position Modulation(TH-BPPM) and Time Hopping Binary Pulse Amplitude Modulation (TH-BPAM) with proposed private MAC protocol for UWB ad-hoc networks. From pulse level to packet level simulation is done in network simulator ns-2 with realistic network environments for varying traffic load, mobility and network density. Our simulation result shows TH-BPAM outperforms TH-BPPM in high traffic load, mobility and dense network cases but in a low traffic load case identical performance is achieved.