• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.183-196
• /
• 1996

The purposes of this study were to review the effects of textiles production on the environment, and to investigate the environmental consciousness and environmental preservation behavior of textile producers. This study was conducted by reference analysis and empirical research. To develope theoretical framework of dimensions of environmental behavior, references concerned were analyzed. And for empirical study, researcher developed a questionnaire based on the free writing by producers and references. The questionnaire included problems about environmental consciousness, environmental behavior, demographic variables, and environmental variables. 135 questionnaires were used for final data analysis. ANOVA and factor analysis were used. The results were as follows: First, the level of global environmental problem consciousness was relatively high. The conscious level of water pollution caused by the waste water from textile mills was the highest, and that of desertation of mountain caused by timber cutting was the lowest. The effects of textile dyers and finishers on the environment were the highest, and that of designers were the lowest. Second, the results of reference analysis showed that the dimensions of textile producers environmental behavior were resource and energy saving, solid waste reduction, and green product production. And the results of empirical study were resource and energy saving, resource reuse or recycling, solid waste reduction, and green product production, and total variances was 62.3%. The practice was the lowest. Third, global environment problem consciousness, environment problem consciousness caused by the textile life-cycle concerned, and clothing seperate-collection or not at residing place were effective on environmental behavior, and 52.45% of environmental behavior was explained with above variables.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.231-241
• /
• 2009

Trade specialization index, import market share, unit value index, market comparative advantage index have been applied to compare the competitiveness of forest products in Korean and European markets for the case of Korea-EU FTA. The results say that no items of non-timber products would show a surge of imports as a result of FTA. Timber products, however, such as non-coniferous plywood, continuously shaped wood (non-coniferous), densified wood, wood wool and flour, other (plywood), other (particle board, 441039)), other (fiberboard), oriented strand board (other), other (particle board, 441090), other (particle board, 441031), Prefabricated buildings of wood, fibreboard (of a density exceeding $0.5g/cm^3$ but not exceeding $0.8g/cm^3$), wooden frames (for paintings, photographs, mirrors or similar objects) and wood marquetry and inlaid wood are expected to increase of their imports by eliminating tariffs. For Korean exports no items of non-timber products have competitiveness in European market. For Korean pyroligneous liquid, which is the only competitive timber product in EU market in terms of MCA and TSI, it is difficult to decide whether it has competitiveness, since the actual exports have taken place occasionally during a period of last five years.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.49-52
• /
• 2008

Structural Wood is developed by purpose to make efficient use of wood resources. The biggest advantage of structural wood is stable as strength is high than wood product that is used by structure in existing. Order manufacture according to design details is available. It Is used to main structure elements to large spatial structure. Structure wood kind utilizes Glulam, prefabricated wood I-joists and laminated veneer lumber(LVL) and so on. Structural Design and construction of Open-air Stage Roof Structure is described in the presented paper. Architectural roof materials is used to PVF/PFLT membrane. Column and diagonal members is used to steel members(SS400), and Cantilever beam is used to Glulam assembled with different Grade laminations(10S-28B).

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.135-146
• /
• 2009

Urban forest area in South Korea has been increased up to 20.8% of national land as of 2007 by the mergence of municipalities and counties. The rate of park and green tract among urban forest averages out to about 4% nationally but the Capital, Seoul, almost 105% level, not easy to split the two. Park and green has positive management system because of its infrastructure attribute and relevant security obligation standard while urban forest left alone with no such concerns. The most important reason of the negligence comes from institutional inertia although it is possible to be managed functionally by forest laws as like forests of park, landscape, wind and noise protection, and timber product. As a results, it reaches below than 92.64% of the national average level of the timber stockpile especially in the metropolitan areas and loses broad acres rapidly due to the easy conversion system to the urban land usage. Therefore, there must be required some alternative methodologies to conserve and foster it. The paper proposes the four urban forest management types and their control methods. The four types divide into conservation, foster, development, and reservation ones. Also it suggests the five furtherance tract types with the combination among the four earlier types, optionally having one of the six aim climaxes and recommends the standardization of operation design. The total green quantity index of urban forest also suggested by the weight method according to location and DBH class. The case study of the suggested model was executed on the Daejon Metropolitan area and its index calculated as 110.4% level compared with the acreage.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.346-354
• /
• 2018

Kemenyan resin from Styrax sumatrana is a unique non-timber forest product (NTFP) native from Sumatera Island, Indonesia. It possesses a wide range of applications in the pharmaceutical, perfume, and cosmetics industries. In this paper, six kemenyan resin samples were investigated to evaluate their free radical scavenging activity using 1,1-diphenyl-2-picrylhydrazyl (DPPH) reagent. The kemenyan resin samples, which originated from North Tapanuli, Pakpak Bharat, and Humbang Hasundutan, showed high antioxidant activity with $IC_{50}$ < 16 mg/L. The antioxidant activity of common kemenyan resin constituents, i.e., cinnamic acid, ethyl cinnamate, gallic acid, and vanillin was also investigated as positive control, although they exhibited lower antioxidant activity ($IC_{50}$ < 1000 mg/L), except for gallic acid ($IC_{50}$ = 5,23 mg/L). The total phenolic and flavonoid contents (TPC and TFC) for all samples were 44-66 mg gallic acid equivalents (GAE)/g sample and 143-160 mg quarcetin equivalents (QE)/g sample. The results revealed that kemenyan resin has high potency as an antioxidant and could be used as a natural antioxidant resource.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.61-68
• /
• 2007

The applicable scope of adhesives in the current society is broad and currently, several types of PVAc resin are sold in the market for adhesives. PVAc resin is primarily used for wood works and paper adhesion. However, the PVAc resin itself has the disadvantages that its viscosity is highly temperature- dependent and the work condition and viscosity get worse at the low temperature in the winter seasons. Although phthalate-based plasticizer is used to complement these disadvantages, adhesion strength and heat-resistance are weakened by adding the phthalate-based plasticizer and in the winter period, the amount of quantity should be increased. Also in a high-density product, it worsens the work condition by causing a rise of viscosity and delays curing and in a low-density product, it worsens the storage stability by causing separate precipitation. In addition to these, the phthalate-based plasticizer as a material of causing environmental hormones is currently restricted in the advanced countries for its amount of use and also in the domestic market, it is necessary to prepare for the situation. This study has not only eliminated the disadvantages of PVAc resin emulsion without adding a phthalate-based plasticizer of causing these problems, but also synthesized the PVAc resin for timber adhesion that is excellent in woodwork, thermal-resistance, water-resistance, storage stability, and adhesion performance. As the result, it has proven an excellent performance in thermal resistance, water resistance, storage stability, and minimum film forming temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.247-253
• /
• 2018

To replace the imported biomass and to effectively cope with growing RPS(Renewable Portfolio Standard) in power sector, the domestic forest biomass resources for wood pellets were estimated from the preceding research and annual growth rate of forest trees in this study. Assuming that 20% of the by-product from forest trees processing were used as raw material for wood pellet and the wood pellet production capacity was based on the average value derived from the above two methods, unused by-product and residues generated 1.99million tons in 2016, 2.28million tons in 2020 and 3.08million tons in 2030. If 20% of by-products(pebbles, sawdust, etc.) from roundwood processing were used as raw material for wood pellets, the wood pellet could be produced 2.74million tons/year in 2016, 2.95million tons/year in 2020, 3.98million tons/year in 2030. Therefore, total amounts of wood pellet would be increased to 2.74million tons/year in 2016, 3.14million tons/year in 2020, 4.23million tons/year in 2030 when it considered unused by-product and residues from wood processing as raw materials.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.401-412
• /
• 2013

Water footprint of a product and service is the volume of freshwater used to produce the product, measured in the life cycle or over the full supply chain. Since water footprint assessment helps us to understand how human activities and products relate to water scarcity and pollution, it can contribute to seek a sustainable way of water use in the consumption perspective. For the introduction of WFP scheme, it is indispensable to construct water inventory/accounting for the assessment, but there is no database in Korea to cover all industry sectors. Therefore, the aim of the study is to develop water footprint inventory within a nation at 403 industrial sectors using Input-Output Analysis. Water uses in the agricultural sector account for 79% of total water, and industrial sector have higher indirect water at most sectors, which is accounting for 82%. Most of the crop water is consumptive and direct water except rice. The greatest water use in the agricultural sectors is in rice paddy followed by aquaculture and fruit production, but the greatest water use intensity was not in the rice. The greatest water use intensity was 103,263 $m^3$/million KRW for other inedible crop production, which was attributed to the low economic value of the product with great water consumption in the cultivation. The next was timber tract followed by iron ores, raw timber, aquaculture, water supply and miscellaneous cereals like corn and other edible crops in terms of total water use intensity. In holistic view, water management considering indirect water in the industrial sector, i.e. supply chain management in the whole life cycle, is important to increase water use efficiency, since more than 56% of total water was indirect water by humanity. It is expected that the water use intensity data can be used for a water inventory to estimate water footprint of a product for the introduction of water footprint scheme in Korea.

• Journal of architectural history
• /
• v.11 no.2 s.30
• /
• pp.7-22
• /
• 2002

Architectural style is said to be product reflecting political, social and cultural condition. Especially, in colony, architectural style is strongly related to political condition or policy. After colonization in 1910, public buildings with western historical architectural style in Japanese version were widely built by Japanese colonial government in Korea. And in the late 1920s, modernism style in architecture became dominant in Korea as like other countries. In this situation, curious buildings in strange architectural styles came out. One example is railroad station buildings with traditional Korean architectural style and timber house station having a steep roof which is widely used in North Europe such as Alps area with good sights and mountains. Generally, the colonizer says that colonization is the only way to save the colony at crisis defined by colonizer and they insist that they can help the colony modernize. To justify colonization, the colonizer attributes the colonization to the characteristics of the nation and stagnation of the traditional culture etc.. Accordingly, the colonizer tries to depreciate colony's traditional value and culture. In case of colony which has similar cultural background historically (in this case, economical exploitation is less important than other Asian colony by European power), this depreciation of traditional value and culture in Korea was done more strongly than others. At this time, we should understand special relation between Korea and Japan historically. Even though, colony's locality is adopted by the colonizer in public fields, which is based on political purpose or exotic taste etc.. In early days of Japanese ruling period, Japan never use the Korean traditional facts in public. Therefore there is no use of Korean traditional architectural style in public field. In late 1920s, some railroad station buildings were constructed in new styles without precedence in modern Korea. One is railroad station buildings in Korean traditional architectural style, the other is railroad station buildings in timber house stations having a steep roof which is different form western historical architectural style. It was mystery that Japan had constructed railroad stations in Korean traditional style which Japan had tried to destroy together with Western style railroad station buildings. This paper is made to solve the mystery why the colonizer(Japan) constructed entirely different types of railroad stations at the same time in the late 1920s and 1930s. The key point to solve this mystery is tourism. In this paper, to solve this mystery, I try to use terminology' 'Colonial Tourism' in architecture why colonial power had constructed railroad stations with colony's traditional architectural style and Western style having a steep roof which can be seen north European region.