• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.813-818
• /
• 2005

In this paper, a re-adhesion control scheme is proposed for 1C2M propulsion system of TTX. The possibility of slip between wheel and rail in railway system is increasing because of the tendency of high speed and a climatic change. This slip results in the decrease of adhesive effort between this wheel and rail, so the control strategy of traction effort which can reduce the speed promptly and make most use of the maximum adhesive force is absolutely necessary. This paper describes the modeling of the TTX system, and this system is verified by the simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.557-563
• /
• 2010

Mode II interlaminar fracture toughness was measured and fractured surfaces were observed of carbon/epoxy and glass/epoxy woven fabric composites for carbody structure. Woven fabric carbon/epoxy and glass/epoxy composites that made with prepreg and epoxy resin(RS1222) are used in carbody structure of Korean tilting train(TTX) and low floor bus. ENF(End Notched Flexure) specimens having $120mm{\times}20m{\times}5mm$ shape and 35mm initial crack were made with each composites and three point bending tests according to ASTM D790 were conducted for these specimens. Crack lengths in tests were recorded using optical microscope and digital camcorder. NL(Non Linear), 5% offset and Max. load points in load -displacement curves were checked and mode II interlaminar fracture toughness of these points were calculated and compared. Fractured surfaces of specimens were observed using optical microscope and mode II delamination behavior of each composites was discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.612-617
• /
• 2007

Several cases of foreign to basis much researches for old line speed elevation of internal railroad consist. Examine about improvement and development of consisting signal system in internal. Examine about establishment of suitable examination and formality creation for road test and road test plan in domestic environment. Effective application of skill development work and examination for technique security and road test planning should be established. Studied about examination of internal old line speed elevation business and road test direction that progress current.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.955-960
• /
• 2009

In order to improve the efficiency of the main transformer in a tilting train, the optimal operation of a cooling system is necessary. Mathematical models of a main transformer cooling system were developed. These include models for the main transformer, the oil pump, the oil cooler, and the blower. The optimal oil temperature algorithm was also developed. This consists of the optimal setpoint algorithm and the control algorithm. A simulation program was developed by using mathematical models and the optimal oil temperature algorithm. Simulation results showed that the dynamic behavior of a main transformer cooling system was predicted well by mathematical models and a main transformer cooling system was controlled effectively by the optimal oil temperature algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.281-283
• /
• 2004

인구가 증가하면서 인간의 생활활동 범위가 증가되었고 이에 따라 운송시스템에 대한 수요가 크게 증대되고 있다. 그러나 물류 이동에 필요한 여러 가지 제반 시설은 이를 충족시키지 못하고 있으며, 이로 인하여 현재 국내의 물류수송효율은 최악의 상황에 직면해있다. 이로써 대용량의 수송능력을 담당하는 철도차량 운송 시스템에 대한 수요가 급증하게 되었다 따라서 이에 대비하고자 많은 신규 노선을 계획하고, 이와 함께 신설되는 노선에 대해서는 시스템 운영 효율의 극대화를 위해 노선별로 고속전철과 지하철, 경전철, 틸팅차량, 그리고 자기부상열차 시스템 등 여러 가지 방식이 검토 중이 있으며 차량에 가장 적합한 추진시스템을 설계하는 것이 차량의 성능에 크게 향상시킬 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.284-286
• /
• 2004

기존노선을 이용한 고속화 신기술 개발사업 과제를 수행하여 중장거리 및 도시간의 교통해소를 위해 중고속 철도차량을 개발하여 최고속도 180km/h의 속도로 운행할수 있는 차량의 주요 전기시스템인 주변압기, 주변환장치, 견인전동기, 보조전원장치의 설계 및 사양을 정립하여 TTX차량을 제작하는 연구를 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1034-1035
• /
• 2008

최근 들어 열차의 고속화, 고성능화 추세에 맞는 철도의 안전성 확보가 더욱 필요해졌다. 이를 달성하기 위해서는 각 전기장치들에 대한 종합적인 시험평가가 이루어져야 한다. 특히 완성차 및 본선시운전 시험을 통해 차량에 대한 여러 상태를 확인해야 한다. 그 중에서도 차량 네트워크 신호는 인간의 두뇌에 해당되는 매우 중요한 시스템이다. 이 신호를 취득하기 위해 계측시스템을 개발하여 차량의 주요신호들을 비교 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.393-394
• /
• 2006

This study introduces the testing results of the composite carbody which is applied to tilting train. The composite carbody is made of aluminum honeycomb structure materials like a sandwich. The static load test was performed to evaluate the structural characteristic and stability of the composite carbody. Considering the vertical, compressive, twisting load and 3-point supporting type as a testing terms, the structural stability of a carbody was evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.321-326
• /
• 2008

Light weight of vehicles by composite materials makes possible high speed, energy saving, and low repair cost. As Bimodal Tram and Tilting Train eXpress(TTX) use carbon composite material for their bodies, safety for passengers and electrical devices against unexpected failures has been issued more than ever. Lightning strike which generates high voltages and large currents is the worst case for the safety of passengers and devices. With this background, we experimentally investigated the insulation breakdown phenomena on carbon composite materials by the application of lightning surge voltage and current. From the experimental results, we could estimate whether the composite body is safe or not for the inside passengers and devices against lightning strikes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.698-703
• /
• 2004

In this study, mode I interlaminar fracture phenomena of carbon fabric/epoxy composite for tilting train were investigated. Specimens were 25mm $\times$ 180mm $\times$ 4.7mm with an initial artificial delamination of 65mm at one end. This delamination with the thickness of 12.5$\mu$m and 25$\mu$m (teflon film) was used. Mode I interlaminar fracture toughness was measured using the double cantilever beam and the fractured surfaces were examined through a scanning electron microscope. The experimental results obtained in this study would be applicable in the design and structural analysis of the composite structures.