• 성인간호학회지
• /
• 제28권6호
• /
• pp.619-627
• /
• 2016

Purpose: This study was to test a structural model of spirituality and the quality of life of stroke survivors' caregivers in order to provide guidelines for the development of intervention and strategies to improve their quality of life. Methods: Data were collected from 133 family caregivers of stroke patients who were hospitalized in C university hospital located in Seoul. Data collection using survey questionnaires was done from May, 2013 to February, 2014. Results: Fitness of the hypothetical model was appropriate. Physical component of quality of life of family caregivers is directly affected by two variables (51.5%), burden and depression. Mental component of quality of life of family caregivers is directly affected by three variables (77.6%), depression, burden, and functional dependence of patients. Depression as well as burden were directly affected by spirituality and functional dependence of patients respectively. Thus, spirituality directly affected depression and burden and indirectly affected the quality of life of family caregivers. Conclusion: Therefore, spiritual intervention to improve the stroke caregivers' quality of life might be necessary to support and strengthen their spirituality as a mediating variable that can contribute to decreasing their depression and burden.

• 한국공간정보시스템학회 논문지
• /
• 제1권2호
• /
• pp.81-98
• /
• 1999

본 연구는 지자체 GIS의 재사용 방안의 제시를 위하여 기존 연구에서 분석된 장애요인을 해결할 수 있는 공통모델의 정립과 이를 구현하기 위한 기술인 컴포넌트의 개발전략을 제시하였다. 지자체 GIS 재사용을 위한 공통모델의 구성요소는 컴포넌트 아키텍쳐 공통 업무프로세스모델, 공통 업무지원기능모델 및 데이터모델로써 시스템으로 구축할 업무의 흐름, 지원기능 및 사용자료에 대한 최소한의 표준안이다. 이러한 공통모텔이 현실화되기 위해서는 아직 활용할 수 있는 컴포넌트가 부족하고, 기존에 개발된 시스템을 계속 활용해야 하는 문제가 남아 있다. 이러한 현실적인 관점에서 출발하여 지자체 GIS 재사용을 (1) 지자체 내 시 구청간의 재사용, (2) 같은 환경에서 구축된 타 지자체 시스템 재사용, (3) 표준인터페이스에 의한 컴포넌트의 자유로운 교체의 세 가지 시나리오를 개념화하고, 그에 따른 재사용전략을 제시하였다. 컴포넌트의 구현은 물론이거니와 본 연구에서 제시한 재사용 전략이 현실화될 수 있도록 하기 위해서는 컴포넌트의 인증제도, 컴포넌트의 소유권 및 판매방법 등 해결되어야 할 향후과제들이 많이 남아있다. 하지만 중앙정부기관, 지자체, 민간기업 등이 중복투자의 방지와 보다 경쟁력 있는 기술 보유를 목적으로 서로 협력한다면 가까운 시일 내에 재사용이 현실화 될 것이다.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.58-76
• /
• 1994

In order to study factors affecting the use of the ambulatory physician services. Andersen's model for health utilization was modified by adding the health behavior component and examined with three different approaches. Three different approaches were the multiople regression model, logistic regression model, and LISREL model. For multiple regression, dependent variable was reported illness-related visits to a physician during past one year and independent variables are variaous variables measuring predisposing factor, enabling factor, need factor and health behavior. For the logistic regression, dependent variable was visit or no-visit to a physician during past one year and independent variables were same as the multiple regression analysis. For the LISREL, five endogenous variables of health utiliztion, predisposing factor, enabling factor, need factor, and health behavior and 20 exogeneous variables which measures five endogenous variables were used. According to the multiple regression analysis, chronic illness, health status, perceived health status of the need factor; residence, sex, age, marital status, education of the predisposing factor ; health insurance, usual source for medical care of enabling factor were the siginificant exploratory variables for the health utilization. Out of the logistic regression analysis, health status, chronic illness, residence, marital status, education, drinking, use of health aid were found to be significant exploratory variables. From LISREL, need factor affect utilization most following by predisposing factor, enabling factor and health behavior. For LISREL model, age, education, and residence for predisposing factor; health status, chronic illess, and perceived health status for need factor; medical insurance for enabling factor; and doing any kind of health behavior for the health behavior were found as the significant observed variables for each theoretical variables.

• 한국공간구조학회논문집
• /
• 제14권3호
• /
• pp.93-100
• /
• 2014

Ethylene Tetrafluoroethylene (ETFE) has been widely used in long-span buildings because of its light weight and high transparency. This paper studies the short and long term creep behaviour of ETFE foil. A series of short-term creep and recovery tests were performed, in which the residual strain was observed. A long-term creep test of the ETFE foil was also performed over 110 days. A viscoelastic-plastic model was then established to describe the short-term creep and recovery behaviour. The model contains a traditional multi-Kelvin part and an added steady-flow component to represent the viscoelastic and viscoplastic behaviour, respectively. The model successfully fit the data for three stresses and six temperatures. Additionally, time-temperature equivalency was adopted to predict the long-term creep behaviour of ETFE foil. Horizontal shifting factors were determined from the process of shifting creep-curves at six temperatures. The long-term creep behaviours at three temperatures were predicted. Finally, the long-term creep test showed that the short-term creep test at identical temperatures insufficiently predicted additional creep behaviour, and the long-term test verified the horizontal shifting factors derived from the time-temperature equivalency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.593-596
• /
• 2002

In this paper, the effect of device model parameter variation on three-dimensional embedded passive devices was investigated using statistical analysis. The optimized equivalent circuit models for several different structures were obtained from HSPICE simulation. The mean and the standard deviation of model parameters were extracted and the sensitivity analysis for each component was performed. From the analysis, the performance and parametric yield of the devices can be analyzed.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.345-356
• /
• 2004

다양한 압축 응력 상태에서의 콘크리트의 거동 특성을 나타내기 위한 소성 모델을 개발하였다. 응력 성분은 압축 상태에서 각각의 거동특성을 갖는 세 개의 직교 성분으로 분리하였다. 각 성분의 거동 특성을 독립적으로 나타내기 위하여 각 성분에 대한 독립적인 다중 파괴기.준을 이용하는 소성모델을 적용하였다. 각 파괴면은 실험결과에 근거하여 각 파괴기준에 대한 등가 소성 변형률에 의하여 정의하였다. 또한, 압축손상에 의한 체적팽창을 나타내기 위한 간단한 비상관 소성흐름법칙을 제안하였다. 제안된 모델은 다양한 재료 특성 및 응력 상태를 갖는 기존의 실험 결과들과 비교를 통하여 검증되었다. 이 비교는 기존의 소성모델보다 제안된 모델의 적용성이 우수함을 입증하고 있다.

• Wind and Structures
• /
• 제25권1호
• /
• pp.63-77
• /
• 2017

When railway vehicles run by towers of long span bridges, the railway vehicles might experience a sudden load-off and load-on phenomenon in crosswind conditions. To ensure the running safety of the railway vehicles and the running comfort of the passengers, some studies were carried out to investigate the impacts of sudden changes of aerodynamic loads on moving railway vehicles. In the present study, the aerodynamic coefficients which were measured in wind tunnel tests using a moving train model are converted into the aerodynamic coefficients in the actual scale. The three-component aerodynamic loads are calculated based on the aerodynamic coefficients with consideration of the vehicle movement. A three-dimensional railway vehicle model is set up using the multibody dynamic theory, and the aerodynamic loads are treated as the inputs of excitation varied with time for kinetic simulations of the railway vehicle. Thus the dynamic responses of the railway vehicle passing by the bridge tower can be obtained from the kinetic simulations in the time domain. The effects of the mean wind speeds and the rail track positions on the running performance of the railway vehicle are discussed. The three-component aerodynamic loads on the railway vehicle are found to experience significant sudden changes when the vehicle passes by the bridge tower. Correspondingly, such sudden changes of aerodynamic loads have a large impact on the dynamic performance of the running railway vehicle. The dynamic responses of the railway vehicle have great fluctuations and significant sudden changes, which is adverse to the running safety and comfort of the railway vehicle passing by the bridge tower in crosswind conditions.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.591-601
• /
• 2019

With the development of renewable energy, grid-connected inverter technology has become an important research area. When compared with traditional silicon IGBT power devices, the silicon carbide (SiC) MOSFET shows obvious advantages in terms of its high-power density, low power loss and high-efficiency power supply system. It is suggested that this technology is highly suitable for three-phase AC motors, renewable energy vehicles, aerospace and military power supplies, etc. This paper focuses on the SiC MOSFET behaviors that concern the parasitic component influence throughout the whole working process, which is based on a three-phase grid-connected inverter. A high-speed model of power switch devices is built and theoretically analyzed. Then the power loss is determined through experimental validation.

• 한국경영과학회지
• /
• 제22권1호
• /
• pp.141-157
• /
• 1997

The structure and dimensionality of the User Information Satisfaction (UIS) construct is an important theoretical issue that received considerable attentions. The acceptance of UIS as a standardized instrument requires confirmation that it explains and measures the user information satisfaction construct and its component. Based on a simple of 670 respondents who participated in dealing with the Public Management Information System (PMIS), this research used a confirmatory factor analysis to test the alternavtive models of underlying factor structure and assessed the reliability and validity of these factors and items in the PMIS. The result provided a support for a revised UIS model with four first-order factors and one PMIS The result provided a support for a revised UIS model with four first-order factors and one second-order (higher-order) factor in PMIS. To cross-validata these results, the author reexamined two prior data sets. The results showed that the revised model provides better model-data fit in all three data sets.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.830-833
• /
• 2005

SDM(Structural Dynamics Modification) is to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary(modifying) structures. In this paper, I will focus on the optimal layout of the stiffeners which are attached to the plate to maximize 1st natural frequency. Recently, a new topology method was proposed by yamazaki. He uses growing and branching tree model. I modified the growing and branching tree model. The method is designated modified tree model. To expand the layout of stiffeners, I will consider non-matching problem. The problem is solved by using local lagrange multiplier without the mesh regeneration. Moreover The CMS(Component mode synthesis) method is employed to reduce the computing time of eigen reanalysis using reduced componet models.