• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.3
• /
• pp.183-188
• /
• 2021

The increase in temperature due to climate warming is predicted to affect crop yields in the future. Until now, various types of OTC (open top chamber) that simulate the future climate condition have been developed and used to study the effect of temperature increase due to global warming on maize growth. However, in most OTCs, high equipment and maintenance costs were required to artificially increase the temperature. This study was carried to develop a cost-effective and simple OTC suitable for climate warming experiments for forage maize. Three octagonal OTCs with a height of 3.5 m × a diameter of 4.08 m and a partially covered top were constructed. The lower part of OTC covered film was opened at a height of 26 cm (OTC-26), 12 cm (OTC-12) from the ground surface, or not opened (0 cm, OTC-0). Mean air temperatures during the daytime on a sunny day in OTC-0, OTC-12 and OTC-26 increased to 3.23℃, 1.33℃, and 0.89℃, respectively, compared to the ambient control plot. For a pilot test, forage maize, 'Gwangpyeongok' was grown at OTCs and ambient control plots. As a result, in the late maize vegetative growth phase (July 30), the plant height was increased more than 45% higher than the ambient control plot in all OTC plots, and the stem diameter also increased in all OTC plots. These results indicate that it is possible to set the temperature inside the OTC by adjusting the opening height of the lower end of the OTC, and it can be applied to study the response of forage maize to elevated temperature. An OTC, with its advantages of energy free, low maintenance cost, and simple temperature setting, will be helpful in studying maize growth responsiveness to climate warming in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.79-90
• /
• 2021

In domestic public construction, disputes are increasing due to differences among stakeholders regarding contract price adjustment. In particular, the actual cost-plus fee for overhead costs due to the schedule extension cannot be agreed upon at the administrative phase, and most of them seek judicial judgment. Thus, this study aims to propose a 'sufficiently satisfactory' alternative to reach an agreement before disputes in order to minimize disputes related to the calculation of additional overhead costs. To this end, this study proposes three alternatives based on the rate method. Firstly, when calculating additional overhead costs, it is not calculated as an actual cost-plus-fee method, but as a rate compared to direct labor costs among net direct costs. Secondly, the calculated indirect labor costs are compensated for up to the legal maximum of legal limit costs such as general management costs, profits and so on. Thirdly, it reflects overhead costs increased or decreased due to change orders. Risks were analyzed by collecting expert opinions on the proposed methods and applying actual cases. Finally, as a result of investigating the level of consensus for each stakeholder, it was confirmed that all stakeholders could agree regardless of the size of the company. The result of this study is expected to as a useful tool among stakeholders in the construction fields that can be able to easily agreed upon.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.1029-1037
• /
• 2021

Objective: This study was conducted to investigate effects of antifungal substance and carboxylesterase-producing inoculant on fermentation indices and rumen degradation kinetics of whole crop rice (WCR) silage ensiled at different dry matter (DM) contents. Methods: Dual-purpose inoculants, Lactobacillus brevis 5M2 and Lactobacillus buchneri 6M1, confirmed both activities of antifungal and carboxylesterase in the previous study. The WCR at mature stage was chopped, and then wilted to obtain three different DM contents consisting of 35.4%, 43.6%, and 51.5%. All WCR forages were applied distilled water (CON) or mixed inoculants with 1:1 ratio at 1×105 colony forming unit/g (INO), and ensiled into 20 L mini silo (5 kg) in quadruplicates for 108 d. Results: The INO silages had lower lactate (p<0.001) and butyrate (p = 0.022) with higher acetate (p<0.001) and propionate (p<0.001) than those of CON silages. Ammonia-N (p<0.001), lactate (tendency; p = 0.068), acetate (p = 0.030), and butyrate (p<0.001) concentrations of INO silages decreased linearly with increasing DM content of WCR forage. The INO silages presented higher lactic acid bacteria (p<0.001) with lower molds (p<0.001) than those of CON silages. Yeasts (p = 0.042) and molds (p = 0.046) of WCR silages decreased linearly with increasing DM content of WCR forage. In the rumen, INO silages had higher the total degradable fraction (p<0.001), total volatile fatty acid (tendency; p = 0.097), and acetate (p = 0.007), but lower the fractional degradation rate (p = 0.011) and propionate (p<0.001) than those of CON silage. The total degradable fraction (p<0.001), total volatile fatty acid (p = 0.001), iso-butyrate (p = 0.036), and valerate (p = 0.008) decreased linearly with increasing DM content of WCR forage, while the lag phase (p<0.001) was increased linearly. Conclusion: This study concluded that application of dual-purpose inoculants on WCR silage confirmed antifungal and carboxylesterase activities by inhibiting mold and improving rumen digestibility, while increase of wilting times decreased organic acids production and rumen digestibility.

• Investigative and Clinical Urology
• /
• v.59 no.6
• /
• pp.357-362
• /
• 2018

Purpose: Classic angiomyolipoma (AML) is common benign kidney tumor. However, some studies have claimed that epithelioid angiomyolipoma (EAML) has malignant potential. We compared the patient characteristics and prognosis of EAML and classic AML to demonstrate predicting factors and poorer prognosis of EAML. Materials and Methods: The medical records of 231 patients who were diagnosed with EAML (n=27, 11.7%) or classic AML (n=204, 88.3%), were reviewed. All patients underwent computed tomography (CT) scans before operation or needle biopsy. We assessed the age, sex, tumor size, body mass index, comorbidities, and Hounsfield unit (HU) according to each CT phase. We defined the unfavorable group as patients with recurrence, metastasis and death due to tumor progression. Logistic regression analysis was used to predict EAML. Results: EAML patients were younger (41.2 years vs. 49.1 years, p=0.001), predominantly male (55.6% vs. 28.4%, p=0.005), and had a larger tumor (7.5 cm vs. 4.2 cm, p<0.001). The median pre-contrast HU was not significantly different between EAML and classic AML ($29.9{\pm}23.7$ vs. $14.7{\pm}41.0$, p=0.071). In multivariable analysis, younger age (odds ratio [OR], 0.96; p=0.032), male sex (OR, 3.33; p=0.013), and tumor larger than 4 cm (OR, 3.8; p=0.009) were significant predictive factors. Five patients (18.5%) had unfavorable outcomes, two patients had lymph node metastasis, and three patients had lung metastasis. Conclusions: Patient and tumor characteristics can be helpful in determining the type of AML preoperatively. Younger age, male sex, and larger tumor mass may increase the possibility of diagnosing EAML. EAML has malignant potential and requires careful follow-up.

• International Area Studies Review
• /
• v.20 no.3
• /
• pp.45-80
• /
• 2016

This paper examined, using three indicators, urban area rate, urbanization rate and urban population density upon the status of urbanization since the 2000s in Southeast Asia. This study also carried out an empirical analysis on the effects of urbanization on economic growth using the Williamson's inverted U-shape hypothesis. In addition, this study calculated the thresholds by which urbanization starts to have positive effects on economic growth by using estimated coefficients, and comparatively analyzed each Southeast Asian country's status. The empirical analysis results opposite to the Williamson's hypothesis. This means that the hypothesis asserting that urbanization has positive effects on economic growth in a country with low economic development phase and income level, but that urbanization can have negative effects on economic growth, if a country's income level is beyond a certain level(threshold), is not supported in this study. In summary, the economies of agglomeration represented as localization economy and urbanization economy is realized to some degree in terms of urbanization in Southeast Asia. Also, urbanization in Southeast Asia has positive effects on economic growth through knowledge spillover, the active exchange of ideas and productivity improvement. In examining the meaning of Southeast Asia's urbanization, policy consideration needs to be conducted, and efforts should be made to maximize the positive effects of the economies of agglomeration and knowledge spillover on economic growth.

• Journal of Animal Science and Technology
• /
• v.61 no.4
• /
• pp.204-215
• /
• 2019

This experiment was conducted to evaluate the effect of dietary energy and crude protein (CP) levels on growth performance, blood profiles, and carcass traits in growing-finishing pigs. A total of 180 crossbred pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) with an average body weight of $30.96{\pm}3.068kg$ were used for a 12-week feeding trial. Experimental pigs were allotted to a $2{\times}3$ factorial arrangement using a randomized complete block (RCB) design. The first factor was two levels of dietary metabolizable energy (ME) density (13.40 MJ/kg or 13.82 MJ/kg), and the second factor was three dietary CP levels based on subdivision of growing-finishing phases (high: 18%/16.3%/16.3%/13.2% middle: 17%/15.3%/15.3%/12.2% and low: 16%/14.3%/14.3%/11.2%). Average daily gain (ADG) and gain-feed ratio (G:F ratio) decreased as dietary CP level was decreased linearly (linear, p < 0.05; p < 0.05, respectively) in the early growing period, and G:F ration also decreased as dietary CP level was decreased linearly (linearly, p < 0.05) over the whole growing phase. Over the entire experimental period, G:F ratio decreased as dietary ME level decreased (p = 0.01). Blood urea nitrogen (BUN) concentration was increased as dietary energy level decreased in growing period (p < 0.01). During finishing period, total protein concentration was decreased by lower dietary energy level (p < 0.05). In this study, there were no significant differences in proximate factors, physiochemical properties, muscle TBARS assay results, pH changes, or color of pork by dietary treatments. However, saturated fatty acid (SFA) increased (p < 0.01) and polyunsaturated fatty acid (PUFA) decreased (p < 0.05) when ME was decreased by 0.42 MJ/kg in growing-finishing pig diets. In addition, monounsaturated fatty acid (MUFA) tended to increase when CP level was decreased in growing-finishing pig diets (p = 0.06). A growing-finishing diet of 13.82 MJ/kg diet of ME with the high CP level can improve growth performance and show better fatty acids composition of pork.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.240-251
• /
• 2019

This study examined the manufacturing technology used for the flat iron axes excavated from Ulsan Hadae. Their microstructures were analyzed using metallurgical methods. In addition, a variety of manufacturing technologies were examined and compared using existing research materials on flat iron axes. As a result of analyzing ten flat iron axes, which were excavated in the order that they were laid out in a row in one of the wooden coffin tombs at Ulsan Hadae, Tomb No. 44, it was possible to classify the flat iron axe manufacturing technology and system into three types: 'pure iron - shape processing', 'pure iron - shape processing - carburizing', and 'pure iron - shape processing - carburizing - decarburizing.' All of the flat iron axes were produced by forging, and most of them were made by beating the pure iron into their shapes. In particular, a number of the flat iron axes were reinforced through a carburizing process after shaping the iron. This appears as steel products forming the basis of the steel industry at the time were commonly used as an intermediary material or currency. On the other hand, it was commonly found in all samples that the hardening was not performed after shaping or carburizing. Since the microstructure of the flat iron axes made of pure iron contained a large number of impure inclusions and the result of analyzing the components of the non-metal inclusions showed characteristics of slag which contains a mixture of glass phase and wustite, it is possible that low-temperature reduction was used in the refining process.

• Journal of Plant Biotechnology
• /
• v.46 no.3
• /
• pp.180-188
• /
• 2019

Auxin plays a crucial regulatory role in plant growth and development processes. Three major classes of auxin-responsive transcription factors controlled by the Auxin/indole-3-acetic acid (Aux/IAA), Gretchen Hagen 3 (GH3), and small auxin up RNA (SAUR) genes regulate auxin signaling. Aux/IAA, in particular, encodes short-lived nuclear proteins that accumulate rapidly in response to auxin signaling. In this study, we isolated a PagAux/IAA1 gene from poplar (Populus alba ${\times}$ P. glandulosa) and investigated its expression characteristics. The PagAux/IAA1 cDNA codes for putative 200 amino acids polypeptide containing four conserved domains and two nuclear localization signals (NLSs). Utilizing Southern blot analysis, we confirmed that a single copy of the PagAux/IAA1 gene was present in the poplar genome. The expression of this gene is specific to leaves and flowers of the poplar. PagAux/IAA1 expressed in the early exponential growth phase of cell-cultured in suspension. PagAux/IAA1 expression level reduced in drought and salt stress conditions, and the presence of plant hormones such as abscisic acid. However, expression enhanced in cold stress, cambial cell division, and presence of plant hormones such as gibberellic acid and jasmonic acid. Thus, these results suggest that PagAux/IAA1 participates in cold stress response as well as developmental processes in the poplar.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.50-61
• /
• 2019

The aspects of typhoon-induced surges were classified into three types at the Western coast, and their characteristics were examined. The typhoons OLGA (9907) and KOMPASU (1007) were the representative steep types. As they pass close to the coasts with fast translation velocity, the time of maximum surge is unrelated to tidal phase. However, typhoons PRAPIROON (0012) and BOLAVEN (1215) were the representative mild types, which pass at a long distance to the coasts with slow translation velocity, and were characterized by having maximum surge time is near low tide. Meanwhile, typhoons MUIFA (1109) and WINNIE (9713) can be classified into mild types, but they do not show the characteristics of the mild type. Thus they are classified into propagative type, which are propagated from the outside. Analyzing the annual highest high water level data, the highest water level ever had been recorded when the WINNIE (9713) had attacked. At that time, severe astronomical tide condition overlapped modest surge. Therefore, if severe astronomical tide encounter severe surge in the future, tremendous water level may be formed with very small probability. However, considering that most of the huge typhoons are mild type, time of maximum surge tends to occur at low tide. In case of estimating the extreme water level by a numerical simulation, it is necessary not only to apply various tide conditions and accompanying tide-modulated surge, but also to scrutinize typhoon parameters such as translation velocity and so on.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.29-36
• /
• 2019

We investigated the fermentation conditions for extracts of leave/branches and sap from Korean Dendropanax morbifera (D. morbifera) using Lactobacillus plantarum (L. plantarum) ilchiwhangchil 1785 and L. plantarum ilchiwhangchil 2020. Log growth phase cultured L. plantarum ilchiwhangchil 1785 and L. plantarum ilchiwhangchil 2020 were used for fermentation. The pH and growth of the microorganisms in broth were monitored during the fermentation period. The results revealed that the optimum fermentation conditions for 20 wt% of leave/branches extracts and 1 wt% of sap extract was 2 days incubation at $37^{\circ}C$. The minimum inhibitory concentration (MIC) method and a disk diffusion assay were used to evaluate the antimicrobial activity of the fermented extracts of the leave/branches and sap against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. The antimicrobial activity increased in all three strains grown on the medium containing fermented extracts of the leave/branches and sap as compared with that of the strains grown on medium containing non fermented extracts. Furthermore, the antimicrobial activity increased in proportion to the contents of the fermented extracts. Our data suggest that fermented extracts of leave/branches and sap of D. morbifera have applications as natural bio functional materials, such as preservatives, cosmetic materials, and natural packaging materials.