• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1465-1469
• /
• 2012

For given electrolytes, different behaviors of anodic aluminum oxide (AAO) and anodic titanium oxide (ATO) during electrochemical thinning are explained by ionic and electronic current modes. Branched structures are unavoidably created in AAO since the switch of ionic to electronic current is slow, whereas the barrier oxide in ATO is thinned without formation of the branched structures. In addition, pore opening can be possible in ATO if chemical etching is performed after the thinning process. The thinning was optimized for complete pore opening in ATO and potential-current behavior is interpreted in terms of ionic current-electronic current switching.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.807-812
• /
• 2001

This paper represents the wall thinning analysis results for secondary side piping of two types of domestic nuclear power plants based on the DB establishment and F AC analysis study for NPP secondary system piping. CHECWORKS code utilized in this study has been applied world widely to wall thinning analyses for secondary side piping and its reliability has also been proved. The predicted wear rates for several piping systems of a pressurized water reactor NPP are compared with those of a pressurized heavy water reactor NPP and with the measured wear rates. On the basis of comparison results of the predicted and measured wear rates, the analysis results can be effectively applied to the development of a standard thinned pipe management program targeted all domestic nuclear power plants.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.750-756
• /
• 1998

In this study, condensation tests were conducted on a vertically finned plate (fin height 1 mm, fin thickness 1 mm, fin spacing 1 mm) using R-113. Results showed that fins enhanced the condensation on a vertical plain surface as much as four times. Comparison with theoretical models revealed that the effect off surface tension should be included in the model. The effect of interruption plates was also investigated. The plates were not effective in enhancing the finned plate condensation. The reason may be attributed to the already thinned condensate film on the finned surface.

• The Korean Journal of Ecology
• /
• 제18권2호
• /
• pp.275-283
• /
• 1995

Seral changes in floristic composition during abandoned field succession after shifting cultivation was investigated in eastern Kangwon-Do, Korea. According to the DCA ordination based on the floristic composition, sere of the dominant species was shown as follows: Digitaria sanguinalis, Persicaria spp., Commelina communis etc. in the annual stage (0∼1 years); Erigeron spp., Artemisia spp., Rubus crataegus etc. in the Erigeron-Artemisia stage (2∼6 years); Pinus densiflora, Salix spp., Miscanthus sinensis, Arundinella hirta etc. in the shrub - earlier tree stage (10∼25 years); P. densiflora, Quercus mongolica, Spodiopogon sibiricus etc. in the mid-tree stage (25∼50 years); Q. mongolica, Tripterigium regelii, Lespedeza maximowiczii, Carex siderosticta etc. in the latter tree stage (50∼80 years). In mid-tree stage, size-frequency distribution of P. densiflora was plotted as a platycurtic curve and that of Q. mongolica as a reverse J-shaped curve, which meant P. densiflora was thinned through interspecific competition and Q. mongolica was regenerated by itself in the later tree stage.

• Advances in pediatric surgery
• /
• 제1권2호
• /
• pp.181-185
• /
• 1995

Segmental intestinal dilatation is rare, which causes symptom of bowel obstruction and requires resection. The resection is not only diagnostic but also curative procedure. Recently, author experienced 2 cases of segmental dilatation of the ileum due to focal agenesis of the intestinal muscularis in 7 day & 4 day-old female neonates. The post operative recovery was excellant in the first case after resection of dilated ileum(15cm in length) and end to end anastomosis, and discharged at 20th day. But in the second case, the passage disturbance was not relieved after resection of dilated ileum (30cm in length), and author re-resected 80cm more of dilated proximal ileum at 2 weeks after the first operation. This baby discharged after diarrhea control with Loperin on 1 month after the second operation. Final histologic examination showed 1) normal population of ganglion cells in both narrowed & dilated ileum in both cases. 2) focal abscence of muscularis propria in both cases. 3) relative hypertrophy of inner circular muscle layer and thinned, multiple fragmented outer longitudinal muscle layer in case 2.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.56-60
• /
• 2006

A high-resolution shadow mask, or called a nanostencil was fabricated for high resolution lithography. This high-resolution shadowmask was fabricated by a combination or MEMS processes and focused ion beam (FIB) milling. 500 nm thick and $2{\times}2mm$ large membranes wore made on a silicon wafer by micro-fabrication processes of LPCVD, photolithography, ICP etching and bulk silicon etching. A subsequent FIB milling enabled local membrane thinning and aperture making into the thinned silicon nitride membrane. Due to the high resolution of the FIB milling process, nanoscale apertures down to 70 nm could be made into the membrane. By local deposition through the apertures of nanostencil, nanoscale patterns down to 70 nm could be achieved.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.189-194
• /
• 2004

When water is evaporated quickly from a water-based colloidal suspension, colloidal particles protrude from the water surface, distorting it and generating lateral capillary forces between the colloidal particles. The protruded colloidal particles are then assembled into ordered colloidal crystalline domains that float on the water surface on account of their having a lower effective density than water. These colloidal crystal domains then assemble together by lateral capillary force and convective flow; the generated colloidal crystal has grain boundaries. The single domain size of the colloidal crystal could be controlled, to some extent, by changing the rate of water evaporation, but it seems very difficult to fabricate a single crystal over a large area of the water's surface without reorienting each colloidal crystal domain. To reorient such colloidal crystal domains, a glass plate was dipped into the colloidal suspension at a tilted angle because the meniscus (airwaterglass plate interface) is pinned and thinned by further water evaporation. The thinning meniscus generated a shear force and reoriented the colloidal crystalline domains into a single domain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.871-874
• /
• 2004

Fabrication of a high-resolution shadow mask, or called nanostencil, is presented. This high-resolution shadowmask is fabricated by a combination of MEMS processes and focused ion beam (FIB) milling. 500 nm thick and 2x2 mm large membranes are made on a silicon wafer by micro-fabrication processes of LPCVD, photolithography, ICP etching and bulk silicon etching. Subsequent FIB milling enabled local membrane thinning and aperture making into the thinned silicon nitride membrane. Due to high resolution of FIB milling process, nanoscale apertures down to 70 nm could be made into the membrane.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.126-129
• /
• 2000

This paper describes on the fabrication of a SOI substrate by SDB technology and electrochemical etch-stop. The surface of the thinned SDB SOI substrate is more uniform than that of grinding or polishing by mechanical method, and this process was found to be very accurate method for SOI thickness control. During electrochemical etch-stop, leakage current versus voltage curves were measured for analysis of the open current potential (OCP) point, the passivation potential (PP) point and anodic passivation potential. The surface roughness and the controlled thickness selectivity of the fabricated a SDB SOI substrate were evaluated by using AFM and SEM, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.620-620
• /
• 2013

When $MoS_2$ is thinned to single layer (1L), photoluminescence (PL) quantum yield drastically increases due to emergence of direct band gap. A recent theory predicts that the electronic structure of 1L $MoS_2$ is very sensitive to its lattice constants. We investigated the response of 1L $MoS_2$ to biaxial tensile strain using spatially resolved PL and Raman spectroscopy. Changes in the lattice constants were monitored by the Raman frequency of the in-plane ($E^1{_2g}$) mode. Systematic correlations between PL and Ramanspectral features, revealed in the preliminary results, will be further tested with samples on other substrates and against thermal stress. The results will also be discussed in regard to the theory which predicts that 1L $MoS_2$ becomes an indirect semiconductor at small tensile strain and turns metallic when further extended.