• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.243-244
• /
• 2021

In this study, we develop diagnostic technology for damage depth of fire-damaged concrete and propose methods for damage caused by fire by drying damaged concrete after immersion. As a result of the test, the damaged depth was clearly found when evaluating the depth of impurities caused by fire in a drying method after water had permeated, and it could be verified using thermogravimetric analysis.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.149-155
• /
• 2009

The thermal decomposition behavior and degradation characteristics off our different thermotropic liquid crystalline polymers (TLCPs) were studied. The thermal decomposition behavior was determined by means of thermogravimetric analysis (TGA) at different heating rates in nitrogen and air. The order of the thermal stability was as follows: multi-aromatic polyester > hydroxybenzoic acid (HBA)/hydroxynaphthoic acid (HNA) copolyester > HNA/hydroxyl acetaniline (HAA)/terephthalic acid (TA) copolyester > HBA/Poly(ethylene terephthalate) (PET) copolyester. The activation energies of the thermal degradation were calculated by four multiple heating rate methods: Flynn-Wall, Friedman, Kissinger, and Kim-Park. The Flynn-Wall and Kim-Park methods were the most suitable methods to calculate the activation energy. Samples were exposed to an accelerated degradation test (ADT), under fixed conditions of heat ($63{\pm}3^{\circ}C$), humidity ($30{\pm}4%$) and Xenon arc radiation ($1.10\;W/m^2$), and the changes in surface morphology and color difference with time were determined. The TLCPs decomposed, discolored and cracked upon exposure to ultraviolet radiation.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2019

The activation energy of CPVC (Chlorinated Poly Vinyl Chloride) used for non-metallic synthetic resin piping in fire-fighting was measured by thermogravimetric analysis (TGA). The activation energy was determined using by TGA kinetic methods, such as Kissinger and Flynn-Wall-Ozawa method. The calculated activation energy was 128.07 kJ/mol (Kissinger method) and 145.60 kJ/mol (Flynn-Wall-Ozawa method). The difference in activation energies calculated by the Kissinger method and Flynn-Wall-Ozawa method was not considered to be significant considering that the different analysis methods. The combustion characteristics will be tested in a future study through an evaluation of thermal deterioration using an accelerated deterioration and air oven aging test and the lifetime of CPVC will be predicted.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2020

In this study, measurement and analysis results from Differential scanning calorimetry(DSC) and Thermogravimetric analysis(TGA) on the newly developed high-energy thermoplastic elastomer(ETPE) propellant are described, followed by the previous study done under the same title as this paper [1]. The characteristics of high-energy thermoplastic propellant were also verified by conducting thermal analysis, and the LSGT, Shotgun & RQ Bomb test, was carried out as well. High energetic thermoplastic binders containing 45% of GAP(Glycidyl Azide Polymer), energetic plasticizer(DEGDN) and Oxidizer Aonium Perchlorate), RDX(reseach development explosive, cyclotrimethylenetrinitramine) were used to formulate the propellant.

• Journal of Power System Engineering
• /
• v.20 no.4
• /
• pp.38-43
• /
• 2016

Safety-related equipments of Nuclear Power Plants(NPP) have to perform environmental qualification test in accordance with IEEE-323 standards. However, non-metallic materials replace new one regularly instead of the test because they are considered as consumable parts. In this study, the seven kinds of non-metallic materials are selected and their activation energy was experimentally evaluated with uncertainty analysis by using thermogravimetric analyzer(TGA). In order to obtain activation energy of non-metallic materials, mass difference, temperature raising rate and conversion rate on the specimen are analyzed. It is postulated that the three experiment conditions are important to get a reliable activation energy. This postulate was experimentally confirmed using Arrhenius equation and Flynn-Wall-Ozawa analysis.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2012

This study was used a thermogravimetric analyzer to determine thermal characteristics, a hair analysis system to examine morphological changes of wefts-human hair, poly vinyl chloride(PVC) and polyethylene terephthalate (PET)-used in manufacturing wigs. According to a flammability test on human hair and synthetic wefts for wigs, the best results were observed in human hair. According to a thermal test, PET was the best in terms of thermal stability. Also good tensile strength was observed as well. In a scanning electron microscope observation, no human hair scale layer was found because of chemical treatment. In the PVC sample, homogeneous unevenness was observed. Due to a lack of human hair supply and increase in its price, recently, PET weft has emerged as a great substitution for human hair. Because it can be curled using an electric curling device and is more efficient than the conventional non-flammable material PVC in terms of thermal resistance, it will become the next-generation weft for wigs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.322-334
• /
• 2007

This study covers the investigation of the actual condition in the workplace to produce plastics products using synthetic resins and the investigation on the trends amount of the domestic production of thermoplastic resins. To analyze the monomers included in thermoplastic resins frequently used in the workplace, we analyzed thermal characteristics for test compounds using thermogravimetric analysis and did the qualitative analysis using Pyrolyzer GC-MSD & TDS GC-MSD. And then we classified the health hazard of monomers based on GHS classification criteria using information toxicity & carcinogenicity. The number of the workplace to produce plastics products among all domestic manufacturers of 73,884 was 4,391 (5.94%). The number of workers to produce plastics products among all workers of 2,522,750 in all domestic manufacturers was 104,971 (4.16%). The amount of production per year for thermoplastic resins is in the order of PP, HDPE, LDPE, PVC, ABS, PS and such compounds was producing over 1 Million ton per year each. The classification result based on GHS classification criteria for 22 main compounds included thermoplastic resins says 2 compounds of acrylonitrile, naphthalene are in Acute oral category 3 and benzene is in Acute dermal category 1. The classification results of health hazard of carcinogenicity based on IARC & ACGIH carcinogen classification says 2 compounds of benzene, vinyl chloride are in category 1A (known to be human carcinogens).

• Composites Research
• /
• v.28 no.5
• /
• pp.316-321
• /
• 2015

This study investigated the effects of microcapsules on mechanical properties and thermal stability of the composite material containing self-healing microcapsules. To this end, tensile specimens and flexural specimens containing melamine-urea-formaldehyde (M-U-F) shell walled microcapsules with diameters of $70{\sim}130{\mu}m$ were manufactured. Varying amount of microcapsules in the specimens was considered: 0 wt%, 0.5 wt%, and 1.0 wt%. The tensile and flexural tests were conducted to evaluate mechanical properties of the specimens containing the microcapsules and the thermogravimetric analysis test was performed to evaluate the thermal stability of the specimens containing the microcapsules. The results show that the tensile strength of the specimens was sensitive to the amount of the microcapsules compared to the tensile modulus even though the tensile modulus of the specimens was not significantly affected by the amount of the microcapsules. However, reduction of the tensile strength was not linearly proportional to the amount of microcapsules; similar results were observed in the flexural test. The weight changes of the specimens containing the microcapsules, as a function of temperature, were similar to those specimens without microcapsules. The thermal stability of the specimens was not affected significantly by the microcapsules embedded in the specimens.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.195-200
• /
• 2019

Whisker-type magnesium hydroxide sulfate hydrate ($5Mg(OH)_2{\cdot}MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH), is used in filler and flame-retardant composites based on its hydrate phase and its ability to undergo endothermic dehydration in fire conditions, respectively. In general, the length of whiskers is determined according to various synthetic conditions in a hydrothermal reaction with high temperature (${\sim}180^{\circ}C$). In this work, high-quality 513 MHSH whiskers are synthesized by controlling the concentration of the raw material in ambient conditions without high pressure. Particularly, the concentration of the starting material is closely related to the length, width, and purity of MHSH. In addition, a ceramic-coating system is adopted to enhance the mechanical properties and thermal stability of the MHSH whiskers. The physical properties of the silica-coated MHSH are characterized by an abrasion test, thermogravimetric analysis, and transmission electron microscopy.