• 소성∙가공
• /
• 제17권8호
• /
• pp.633-642
• /
• 2008

It's important to measure quantitative properties about thermal-nano behavior of polymer for producing high quality components using Nanoimprint lithography process. Nanoscale indents can be used to make the cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. In this study, formability of polymethylmetacrylate(PMMA) and polycarbonate(PC) were characterized Polymer has extreme variation in thermo mechanical variation during forming high temperature. Because of heating the polymer, it becomes softer than at room temperature. In this case it is particularly important to study high temperature-induced mechanical properties of polymer. Nanoindenter XP(MTS) was used to measure thermo mechanical properties of PMMA and PC. Polymer was heated by using the heating stage on NanoXP. At CSM(Continuous Stiffness Method) mode test, heating temperature was $110^{\circ}C,120^{\circ}C,130^{\circ}C,140^{\circ}C$ and $150^{\circ}C$ for PMMA, $140^{\circ}C,150^{\circ}C,160^{\circ}C,170^{\circ}C$ and $180^{\circ}C$ for PC, respectively. Maximum indentation depth was 2000nm. At basic mode test, heating temperature was $90^{\circ}C$ and $110^{\circ}C$ for PMMA, $140^{\circ}C,160^{\circ}C$ for PC. Maximum load was 10mN, 20mN and 40mN. Also indented pattern was observed by using SEM and AFM. Mechanical properties of PMMA and PC decreased when temperature increased. Decrease of mechanical properties from PMMA went down rapidly than that of PC.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2425-2433
• /
• 2018

This study investigates a new organic based material and its dielectric and mechanical properties. It is a comprehensive nanocomposite comprising a combination of various types of nanofillers with hydrophobic silica nanoparticles (AEROSIL R 974) as a matrix modifier and a polyamide nano nonwoven textile, Ultramid-Polyamide 6, pulped in the electrostatic field as a dielectric barrier. The polymer matrix is an epoxy network based on diglycidyl ether of bisphenol A (DGEBA) and cycloaliphatic diamine (Laromine C260). The designed nanocomposite material is an alternative to the conventional three-component composites containing fiberglass and mica with properties that exceed current electroinsulating systems (volume resistivity on the order of $10^{16}{\Omega}{\cdot}m$, dissipation factor tan ${\delta}=4.7{\cdot}10^{-3}$, dielectric strength 39 kV/mm).

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.23-41
• /
• 2023

Coupled thermo-hydraulic-mechanical (THM) processes are essential for the long-term performance of deep geological disposal of high-level radioactive waste. In this study, a numerical sensitivity analysis was performed to analyze the effect of rock properties on THM responses after the execution of the heater test at the Kamaishi mine in Japan. The TOUGH-FLAC simulator was applied for the numerical simulation assuming a continuum model for coupled THM analysis. The rock properties included in the sensitivity study were the Young's modulus, permeability, thermal conductivity, and thermal expansion coefficients of crystalline rock, rock salt, and clay. The responses, i.e., temperature, water content, displacement, and stress, were measured at monitoring points in the buffer and near-field rock mass during the simulations. The thermal conductivity had an overarching impact on THM responses. The influence of Young's modulus was evident in the mechanical behavior, whereas that of permeability was noticed through the change in the temperature and water content. The difference in the THM responses of the three rock type models implies the importance of the appropriate characterization of rock mass properties with regard to the performance assessment of the deep geological disposal of high-level radioactive waste.

• 폴리머
• /
• 제36권3호
• /
• pp.275-280
• /
• 2012

Pyromellitic dianhydride(PMDA), 3,3'-4,4'-benzopenonetetracarboxylic dianhydride(BPDA) 그리고 $p$-phenylenediamine($p$-PDA)와 함께 1,4-bis(4-aminophenoxy)benzene(1,4-APB)와 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane(HFBAPP)를 각각 이용하여 폴리아믹산을 합성하였고, 이를 열적 이미드화 공정을 통하여 폴리이미드 필름을 제조하였다. 제조된 필름은 퓨리에 변환 적외선 분광기(FTIR), 열 중량 분석기(TGA), 열 기계 분석기(TMA), 동 역학적 거동 분석기(DMA), 그리고 만능 인장 시험기(UTM) 등을 이용하여 화학 구조 및 열적 기계적 특성을 조사하였다. 1,4-APB와 HFBAPP의 조성이 증가함에 따라 열적 기계적 물성과 흡습률이 낮아지는 경향을 나타내었고, 동박과 비슷한 열팽창계수(CTE)를 가진 폴리이미드 필름의 경우 HFBAPP를 이용한 필름이 1,4-APB를 이용한 필름보다 향상된 열적 특성과 낮은 흡습률 결과를 나타내었다. 이와 같이 본 연구에서 합성된 폴리이미드 필름은 유연성 회로 기판의 flexible copper clad laminates(FCCL)를 위한 기본 필름으로 적용할 수 있을 것으로 판단된다.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.165-194
• /
• 2017

The present work proposes the thermo mechanically induced statistics of nonlinear transverse central deflection of elastically supported functionally graded (FG) plate subjected to static loadings with random system properties. The FG plate is supported on two parameters Pasternak foundation with Winkler cubic nonlinearity. The random system properties such as material properties of FG material, external loading and foundation parameters are assumed as uncorrelated random variables. The material properties are assumed as non-uniform temperature distribution with temperature dependent (TD) material properties. The basic formulation for static is based on higher order shear deformation theory (HSDT) with von-Karman nonlinear strain kinematics through Newton-Raphson method. A second order perturbation technique (SOPT) and direct Monte Carlo simulation (MCS) are used to compute the nonlinear governing equation. The effects of load parameters, plate thickness ratios, aspect ratios, volume fraction, exponent, foundation parameters, and boundary conditions with random system properties are examined through parametric studies. The results of present approaches are compared with those results available in the literature and by employing direct Monte Carlo simulation (MCS).

• Advances in nano research
• /
• 제4권3호
• /
• pp.197-228
• /
• 2016

In the present study, thermo-electro-mechanical vibration characteristics of functionally graded piezoelectric (FGP) Timoshenko nanobeams subjected to in-plane thermal loads and applied electric voltage are carried out by presenting a Navier type solution for the first time. Three kinds of thermal loading, namely, uniform, linear and non-linear temperature rises through the thickness direction are considered. Thermo-electro-mechanical properties of FGP nanobeam are supposed to vary smoothly and continuously throughout the thickness based on power-law model. Eringen's nonlocal elasticity theory is exploited to describe the size dependency of nanobeam. Using Hamilton's principle, the nonlocal equations of motion together with corresponding boundary conditions based on Timoshenko beam theory are obtained for the free vibration analysis of graded piezoelectric nanobeams including size effect and they are solved applying analytical solution. According to the numerical results, it is revealed that the proposed modeling can provide accurate frequency results of the FGP nanobeams as compared to some cases in the literature. In following a parametric study is accompanied to examine the effects of several parameters such as various temperature distributions, external electric voltage, power-law index, nonlocal parameter and mode number on the natural frequencies of the size-dependent FGP nanobeams in detail. It is found that the small scale effect and thermo-electrical loading have a significant effect on natural frequencies of FGP nanobeams.

• 소성∙가공
• /
• 제8권5호
• /
• pp.498-506
• /
• 1999

The metal forming processes of aluminum alloy wheel forging at elevated temperature are analyzed by the finite element method. A coupled thermo-mechanical model for analysis of plastic deformation and geat transfer is adapted in the finite element formulation. In order to consider the strain-rate effects on material properties and the flow stress dependence on temperatures, rigid-viscoplasticity is introduced in this formation. In this paper, several process conditions were applied to the dimulation such as die speed, rib thickness, and depth of die cavity. Simulation results are compared, and discussed with each case. Metal flow, die pressure distributions, temperature distributions, velocity fields and forging loads are summarized as basic data for process design and selection of a proper press equipment.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.87-94
• /
• 2023

TMCP(Thermo Mechanical Control Process) steel was continuously cast (CC) by varying the argon gas flow rate and vacuum time in the Ruhrstahl Heraeus (RH) refining process. Using the CC specimens, the distribution of the inclusions and the mechanical properties were evaluated. A lot of oxides and Al-O type inclusions were observed. The average Vickers hardness did not show a constant, but showed dispersion in a certain range. The shape and scale parameters of the CC specimen with an argon gas flow rate of 160Nm³ and a vacuum time of 12 minutes was the best. Mechanical properties (tensile strength, yield strength and elongation) were consistent with the Weibull probability distribution analysis results. The impact resistance was the best for CC specimens with an argon flow rate of 140 Nm³ and a vacuum time of 12 minutes. Although the inclusions and mechanical properties of the CC specimens were evaluated according to the argon gas flow rate and vacuum time, these values were no significant difference.

• 한국분말재료학회지
• /
• 제11권1호
• /
• pp.8-15
• /
• 2004

FGM은 원하는 물성의 점진적인 변화를 통해 재료에 다양한 특성을 확보할 수 있는 방법이다. 여러FGM의 제조 방법 중 분말야금법과 열용사법이 많이 사용되며, FGM적용은 열ㆍ기계적 물성이 요구되는 응용분야에서 가장 전망이 있고 현재 가장 많은 연구가 진행되어 왔다. 경사기능의 도입은 2층 구조의 재료에 비하여 열팽창 계수의 차이에 의한 층간 잔류응력 집중을 완화 시켜 접합 강도와 열 충격 특성 및 열피로 특성 등의 향상을 가져왔다. 그러나 120$0^{\circ}C$ 이상의 고온에서 사용되어지는 경우, 표면에서 가까이 위치한 금속부의 산화에 의해서 2층 구조보다 저하된 열피로 특성을 보였다. 이러한 점들은 FGM이 가지고 있는 근본적인 문제이므로 응용처의 환경에 대한 고려가 필요하다. 내열 재료뿐만 아니라, 구조용 재료에서도 기계적 물성의 향상을 위해 FGM이 시도되고 있는 등, 현재까지 응용분야의 확대 가능성은 무한하다. 경사 기능 재료를 실제 적용하는데 있어서 문제점으로 지적되고 있는 점들은 1)경사 기능 재료의 신뢰성, 2)경사 기능 재료의 설계, 3)경사 기능 재료의 제조 공정 등의 세 가지 문제점으로 요약할 수 있다. FGM에서의 물성의 변화는 미세구조의 변화 등으로 단순히 rule of mixture로 해석되지 않는다. 이를 위하여 최근 전산 모사를 통해 조성 경사도 및 재료 선정 등에 대한 연구가 이루어지고 있는 추세이며, 새로운 제조 방법 개발 및 개량이 꾸준히 진행되고 있어 향후 FGM의 적용에 대한 전망은 밝다.

• Journal of Welding and Joining
• /
• 제24권2호
• /
• pp.57-63
• /
• 2006

In this study, the curing kinetics and thermal degradation of underfill were investigated using differential scanning calorimetry (DSC) and thermo gravimetry analysis (TGA). The mechanical and thermal properties of underfill were characterized using dynamic mechanical analysis (DMA) and thermo-mechanical analysis (TMA). Also, we presented on underfill dispensing process using Prostar tool. The non-isothermal DSC scans at various heating rates, the exothermic reaction peak became narrower with increasing the heating rate. The thermal degradation of underfill was composed of two processes, which involved chemical reactions between the degrading polymer and oxygen from the air atmosphere. The results of fluidity phenomena were simulated using Star CD program, the fluidity of the underfills with lower viscosity was faster.