• 한국항공우주학회지
• /
• 제46권11호
• /
• pp.892-901
• /
• 2018

본 연구에서는 극초음속 비행체의 공력/열/탄성학적 거동을 반영할 수 있는 효율적인 공력 열하중 요소를 개발하였다. 빈번하게 설계 변경이 이루어지는 초기 설계 단계에서 효율적으로 사용될 수 있도록 준 해석적인 관계식을 적용하여 공력 하중과 열 하중을 구조 변형의 함수로 기술하고, 이를 기반으로 공력 열하중 요소를 정식화하였다. 정식화된 요소는 상용 프로그램의 사용자 서브루틴 형태로 구현하였으며, 이를 이용하여 극초음속 비행체 조종면의 공력/열/탄성학적 유한요소 연계해석을 수행하고 그 유용성을 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.399-400
• /
• 2002

A numerical procedure for analyzing thermo-elastic contact applied to an automotive disk brake and calculating subsurface stress distribution has been developed. The proposed procedure takes the advantage of the simplex algorithm to save computing time. Flamant's solution and Boussinesq's solution are adopted as Green function in analysis. Comparing the numerical results with the exact solutions has proved the validity of this procedure.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.75-97
• /
• 2018

In this paper, a novel higher-order shear deformation theory (HSDT) is proposed for the analysis of the hygro-thermo-mechanical behavior of functionally graded (FG) plates resting on elastic foundations. The developed model uses a novel kinematic by considering undetermined integral terms and only four variables are used in this model. The governing equations are deduced based on the principle of virtual work and the number of unknown functions involved is reduced to only four, which is less than the first shear deformation theory (FSDT) and others HSDTs. The Navier-type exact solutions for static analysis of simply supported FG plates subjected to hygro-thermo-mechanical loads are presented. The accuracy and efficiency of the present model is validated by comparing it with various available solutions in the literature. The influences of material properties, temperature, moisture, plate aspect ratio, side-to-thickness ratios and elastic coefficients parameters on deflections and stresses of FG plates are also investigated.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.197-207
• /
• 2000

본 연구는 유한요소법을 이용해서 시간이력 열전도해석과 열탄성해석을 통해 필렛용접 이음부에서의 잔류응력분포를 측정하였다. 필렛용접은 1패스 용접이며, 경계조건으로는 표면유속조건과 온도에 의존하는 재료의 특성치를 고려하여 잔류응력을 평가하였다. 여기서, 용접입열양을 변수로 하였다. 그리고, 열탄성해석에 의해 잔류응력 평가할 때 중요한 문제로 언급되고 있는 cut-off 온도 설정에 대해 조사하였다. 또한, 시험체에서 구멍뚫기 방법에 의해 잔류응력분포를 측정하여 유한요소법에 의한 잔류응력분포와 비교하였다. 그 결과, 용접부에서는 재료의 항복강도 수준에 해당하는 인장잔류응력이 측정되었으며, 유한요소해석에 의한 수치해석 결과는 구멍뚫기 방법에 의한 측정치 및 다른 연구자의 측정치와 비교적 일치하는 것으로 나타났다. 그리고, Cut-off 온도는 재료의 항복강도가 나타나는 온도로 설정하는 것이 효과적임을 알 수 있었다.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.525-536
• /
• 2018

This paper focuses on the application of the first-order shear deformation theory (FSDT) to thermo-elastic static problems of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) cylindrical pressure vessels. A symmetric displacement field is considered as unknown function along the longitudinal direction, whereas a linear distribution is assumed along the thickness direction. The cylindrical pressure vessels are subjected to an inner and outer pressure under a temperature increase. Different patterns of reinforcement are applied as distribution of CNTs. The effective material properties of FG-CNTRC cylindrical pressure vessels are measured based on the rule of mixture, whereas the governing equations of the problem are here derived through the principle of virtual works. A large parametric investigation studies the effect of some significant parameters, such as the pattern and volume fraction of CNTs, on the longitudinal distribution of deformation, strain and stress components, as useful tool for practical engineering applications.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.753-776
• /
• 2014

In this paper, nonlinear vibration and post-buckling analysis of beams made of functionally graded materials (FGMs) resting on nonlinear elastic foundation subjected to thermo-mechanical loading are studied. The thermo-mechanical material properties of the beams are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and to be temperature-dependent. The assumption of a small strain, moderate deformation is used. Based on Euler-Bernoulli beam theory and von-Karman geometric nonlinearity, the integral partial differential equation of motion is derived. Then this PDE problem which has quadratic and cubic nonlinearities is simplified into an ODE problem by using the Galerkin method. Finally, the governing equation is solved analytically using the variational iteration method (VIM). Some new results for the nonlinear natural frequencies and buckling load of the FG beams such as the influences of thermal effect, the effect of vibration amplitude, elastic coefficients of foundation, axial force, end supports and material inhomogenity are presented for future references. Results show that the thermal loading has a significant effect on the vibration and post-buckling response of FG beams.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.51-60
• /
• 2001

A prediction method for determining the welding residual stress by artificial neural network is proposed. A three-dimensional transient thermo-mechanical analysis has been performed for the $CO_2$ arc welding using the finite element method. The first part of numerical analysis performs a three-dimensional transient heat transfer analysis, and the second part then uses the results of the first part and performs a three-dimensional transient thermo-elastic-plastic analysis to compute transient and residual stresses in the weld. Data from the finite element method are used to train a back propagation neural network to predict the residual stress. Architecturally, the fully interconnected network consists of an input layer for the voltage and current, a hidden layer to accommodate the failure mechanism mapping, and an output layer for the residual stress. The trained network is then applied to the prediction of residual stress in the four specimens. It is concluded that the accuracy of the neural network predicting method is fully comparable with the accuracy achieved by the traditional predicting method.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.707-717
• /
• 2020

In this paper, analysis of thermal post-buckling behaviors of sandwich nanobeams with two layers of multi-phase magneto-electro-thermo-elastic (METE) composites have been presented considering geometric imperfection effects. Multi-phase METE material is composed form piezoelectric and piezo-magnetic constituents for which the material properties can be controlled based on the percentages of the constituents. Nonlinear governing equations of sandwich nanobeam are derived based on nonlocal elasticity theory together with classic thin beam model and an analytical solution is provided. It will be shown that post-buckling behaviors of sandwich nanobeam in thermo-electro-magnetic field depend on the constituent's percentages. Buckling temperature of sandwich nanobeam is also affected by nonlocal scale factor, magnetic field intensity and electrical voltage.

• Composites Research
• /
• 제15권1호
• /
• pp.41-52
• /
• 2002

이 논문에서는 탄소/탄소 브레이크 제동중 시스템의 거동을 열탄성 해석을 수행하여 살펴보았고. 파손에 안정적인 디스크의 형상을 찾기 위하여 다양한 형상에 대한 3차원 응력해석을 수행하였다. 탄소/탄소 복합재료의 기계적 물성치가 적층면방향과 두께방향으로 측정되었다. 측정긴 기계적 물성치는 열탄성 해석과 3차원 응력해석을 위한 입력으로 사용 되었다. 로터 클립과 클립 리테이너 사이의 간격은 회전판의 하중전달 미케니즘에 있어서 중요만 인자이다. 간격변화는 기계적 변형과 열 변형으로 분리하여 고려하였다. 클립과 리테이터는 서로 접촉이 발생하지 않았으므로 해석 모델에서 리테이너와 리벳은 제외되었다. 로터 디스크는 반복대칭조건을 사용하여 모델링되었고, 로터 디스크와 로터 클립, 로터 클립과 키 드럼사이의 2중 접촉문제가 고려되었다. 3차인 응력해석의 결과로부터 브레이크 디스크의 키 홀 부분에 응력집중현상이 발생하는 것을 확인하였다. 응력분포는 키 홀 부분에서 접촉면의 회전각과 곡률반경의 변화에 따라 연구 되었다.