• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.12
• /
• pp.931-937
• /
• 2008

A high motive pressure thermal vapor compressor(TVC) for a commercial multi-effect desalination(MED) plant is designed to have a high entraining performance and its robustness is also considered in the respect of operating stability at the abrupt change of the operating pressures like the motive and suction steam pressure which can be easily fluctuated by the external disturbance. The TVC having a good entraining performance of more than entrainment ratio 6.0 is designed through the iterative CFD analysis for the various primary nozzle diameter, mixing tube diameter and mixing tube length. And then for a couple of TVC having a similar entrainment ratio, the changes of the entrainment ratio are checked along the motive and suction pressure change. The system stability is diagnosed through the analyzing the changing pattern of the entrainment ratio.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.653-655
• /
• 2008

In order to examine the influences by the extreme weather changes on the human physical conditions, we need to undertake human biometeorology research such as the assesment on the extreme heat's influences on human health. Most of the preceding studied have been found to be focused on the influences by extreme heat on the human body, they used statistics on the daily mortality. But thismethod estimate an indirectly influences by extreme heat on the human body. So, to be able to predict the possible directly influences by the extreme heat on the physical conditions. We measure thermal stress by extreme heat.

• Coupled systems mechanics
• /
• v.8 no.5
• /
• pp.459-471
• /
• 2019

This paper presents post-buckling analysis of a functionally graded beam under hygro-thermal effect. The material properties of the beam change though height axis with a power-law function. In the nonlinear kinematics of the post-buckling problem, the total Lagrangian approach is used. In the solution of the problem, the finite element method is used within plane solid continua. In the nonlinear solution, the Newton-Raphson method is used with incremental displacements. Comparison studies are performed. In the numerical results, the effects of the material distribution, the geometry parameters, the temperature and the moisture changes on the post-buckling responses of the functionally graded beam are presented and discussed.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.433-441
• /
• 2019

In this paper, geometrically nonlinear static analysis of laminated composite beams is investigated under hygrothermal effect. In the solution of problem, the finite element method is used within the first shear beam theory. Total Lagrangian approach is used nonlinear kinematic model. The geometrically nonlinear formulations are developed for the laminated beams with hygro-thermal effects. In the nonlinear solution of the problem, the Newton-Raphson method is used with incremental displacement. In order to verify of obtained formulations, a comparison study is performed. The effects of the fiber orientation angles, the stacking sequence of laminates, temperature rising and moisture changes on the nonlinear static displacements and configurations of the composite laminated beam are investigated in the numerical results.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.48-52
• /
• 2023

Many studies have been conducted to ensure that Visual Place Recognition is reliable in various environments, including edge cases. However, existing approaches use visible imaging sensors, RGB cameras, which are greatly influenced by illumination changes, as is widely known. Thus, in this paper, we use an invisible imaging sensor, a long wave length infrared camera (LWIR) instead of RGB, that is shown to be more reliable in low-light and highly noisy conditions. In addition, although the camera sensor used to solve this problem is an LWIR camera, but since the thermal image is converted into RGB image the proposed method is highly compatible with existing algorithms and databases. We demonstrate that the proposed method outperforms the baseline method by about 0.19 for recall performance.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.2
• /
• pp.66-73
• /
• 2022

Partial-hardened hot stamping has been well known to be very effective to absorb more energy in automotive lateral crash. Hardness distribution and dimensional change after partial-hardened hot stamping have been studied to find out effect of thermal deformation of the heated hot stamping die on dimensional accuracy of automotive center pillar. Soft zone of commercial center pillar showed 275~345 in Vickers hardness, indicating bigger non-uniformity which resulted from thermal deformation of heated die. Dimensional changes in soft zone of the commercial center pillar measured by three dimensional scanner were much bigger than that in hard zone. It has been found that hot stamping die compensation considering thermal deformation in soft zone causes a significant decrease in hardness deviation in the soft zone, corresponding to 20 percent of commercial center pillar and subsequently leads to much higher dimensional accuracy.

• Coupled systems mechanics
• /
• v.13 no.1
• /
• pp.61-72
• /
• 2024

This study seeks to develop analytical solutions for the biothermoelastic model without accounting for energy dissipation. These solutions are then applied to estimate the temperature changes induced by external heating sources by integrating relevant empirical data characterizing the biological tissue of interest. The distributions of temperature, displacement, and strain were obtained by utilizing the eigenvalues approach with the Laplace transforms and numerical inverse transforms method. The impacts of the rate of blood perfusion and the metabolic activity parameter on thermoelastic behaviors were discussed specifically. The temperature, displacement, and thermal strain results are visually represented through graphical representations.

• Computers and Concrete
• /
• v.34 no.3
• /
• pp.267-277
• /
• 2024

In this article, the primary resonance characteristic of magneto-electro-elastic plates is analyzed, in which the geometric imperfection, thermal effect and shear deformation are taken into account, Applying Hamilton's principle, derivation of nonlinear motion equations is performed. Through solving these equations according to the modified Lindstedt Poincare method, the impacts of external electric voltage, magnetic potential, boundary conditions, temperature changes, geometric imperfection and aspect ratio on the resonance behaviors of MEE plates are examined. It can be found that, as the electric potential rises, the resonance position will be advanced. As the magnetic potential goes up, the resonance frequency of the plates increases, thus delaying the resonance position. As the initial geometric imperfection rises, the resonance position does not change, and the hard spring properties of the plates gradually weaken.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.437-440
• /
• 2004

The radiation-induced changes taking place in poly(vinylidene fluoride)(PVDF) exposed to $^{60}Co\;\gamma-ray$ irradiation were investigated in correlation with the applied doses. Samples were irradiated in air at room temperature by $^{60}Co\;\gamma-ray$ to doses in the range of 200 to 1000 kGy. Various properties of the irradiated PVDF were studied using nm, differential scanning calorimetry(DSC) and gel fraction. $^{60}Co\;\gamma-ray$ irradiation was found to induce changes in chemical, thermal, structural properties of PVDF and such changes vary depending on the radiation dose.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.75-80
• /
• 2006

Changes in the levels of protein and free amino acids in the haemolymph of three selected races of the silkworm, Bombyx mori viz., PM, $NB_4D_2$ and $CSR_2$, were investigated during 4th moult, 5th instar and pupal period. The levels of total protein in the haemolymph, increased from first day of 5th instar till sixth day. From seventh day till spinning, the protein levels decreased in all the three races. A sustained decrease in the haemolymph proteins was observed during the pupal development in all the three races. The levels of free amino acids, which were high during 4th moult, declined through the 5th age of larval development till spinning. PM showed a relatively higher free amino acid level (3.192 mg/ml) in haemolymph followed by $NB_4D_2$ (2.601 mg/ml) and $CSR_2$ (2.35 mg/ml). The free amino acid levels decreased gradually from prepupal stage but increased again at the end of pupal period. Racial differences in the changes in the levels of protein and free amino acids in the haemolymph were observed in the larvae and pupae when subjected to two high temperature regimes of $30^{\circ}C$ and $35^{\circ}C$. The results showed that high temperature induces specific changes in the metabolism (reversible thermal stress) that have different adaptive value in different races of the silkworm. Relatively higher increase in the free amino acid levels in the haemolymph of Pure Mysore presumably provides protective cover to tissues against high temperature by an increase in osmolarity and reduction in evaporative water loss. The absence of such a mechanism may be responsible for temperature susceptibility of the bivoltine races like $NB_4D_2$ and $CSR_2$.