• 한국환경과학회지
• /
• 제20권11호
• /
• pp.1465-1481
• /
• 2011

The accuracy of ozone sensitivity coefficients estimated with HDDM (High-order Decoupled Direct Method) can vary depending on the $NO_x$ (Nitrogen Oxides) and VOC (Volatile Organic Compound) conditions. In order to evaluate the applicability of HDDM over the Seoul Metropolitan Area (SMA) during a high ozone episode in 2007 June, we compare BFM (Brute Force Method) and HDDM in terms of the $1^{st}$-order ozone sensitivity coefficient to explain ozone change in response to changes in NOx and VOC emissions, and the $2^{nd}$-order ozone sensitivity coefficient to represent nonlinear response of ozone to the emission changes. BFM and HDDM estimate comparable ozone sensitivity coefficients, exhibiting similar spatial and temporal variations over the SMAduring the episode. NME (Normalized Mean Error) between BFM and HDDM for the episode average $1^{st}$- and $2^{nd}$-order ozone sensitivity coefficients to NOx and VOC emissions are less than 3% and 9%, respectively. For the daily comparison, NME for the $1^{st}$- and $2^{nd}$-order ozone sensitivity coefficients are less than 4% ($R^2$ > 0.96) and 15% ($R^2$ > 0.90), respectively. Under the emission conditions used in this study, two methods show negative episode average $1^{st}$-order ozone sensitivity coefficient to $NO_x$ emissions over the core SMA. The $2^{nd}$-order ozone sensitivity coefficient to $NO_x$ emissions leads ozone to respond muchnonlinear to the reduction in $NO_x$ emissions over Seoul. Nonlinear ozone response to reduction in VOC emissions is mitigated due to the $2^{nd}$-order ozone sensitivity coefficient which is much smaller than the $1^{st}$-order ozone sensitivity coefficient to the emissions in the magnitude.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.14-26
• /
• 2018

This study was to explore purchasing behavior and repurchase intention by considering social-face sensitivity and conspicuous consumption. To do this, first, this study tried to explain how consumers had different characteristics for social-face sensitivity, conspicuous consumption, purchasing behavior, and repurchase intention for outdoor wear. Second, this study tested the relationship between consumer behavior (purchasing behavior and repurchase intention) and social-face sensitivity by considering the mediating effect of conspicuous consumption. As the results, first, there was a significant relationship between social-face sensitivity (sensitivity to saving face) and conspicuous consumption, which had a significant effect on the purchasing behavior with outdoor wear(purchase frequency, purchase cost). Second, social-face sensitivity (consciousness of shame) had a significant effect on conspicuous consumption (preference for famous brands, status symbol, pursuing fashion), and social face sensitivity (consciousness of social formality) had a significant effect on conspicuous consumption (preference for famous brands). The relationship between the conspicuous consumption and purchasing behavior showed that conspicuous consumption had significant effects on consumer behavior (purchase frequency, purchase cost). The relationship between the social-face sensitivity and purchasing behavior showed that being conscious of others had a significant effect on purchasing behavior. Third, purchasing behavior with outdoor wear had a significant effect on repurchase intention. Finally, this study confirmed that conspicuous consumption had a partially significant mediating effect on the relationship between social-face sensitivity (sensitivity to saving face) and purchasing behavior.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.81-88
• /
• 2020

본 연구는 간호 대학생을 대상으로 인권감수성 향상교육을 통한 인권감수성 및 환자권리인식의 효과성을 파악하여 효율적인 인권감수성 교육 방안을 마련하고자 시도되었다. 연구대상은 간호 대학생 318명으로 인권감수성 향상교육 실시 전과 후의 인권감수성과 환자권리인식을 파악한 비동등성 대조군 전후설계로 진행하였다. 연구결과 대상자 인권감수성은 총 90점 만점의 평균 40.22점이며, 각 문항별 점수 환산 시 평균 2.23점이었다. 사례기반 인권감수성 향상을 위한 교육을 받은 학생은 교육을 받지 않는 학생보다 인권감수성과 환자권리인식이 향상됨을 보였다(t=2.765,p=.006, t=-5.768,p=.000). 이에 본 연구는 간호대학생의 인권감수성을 증가시킬 수 있는 교육과정 기반 마련과 추후 임상실습과 인권감수성과의 관계연구를 제안하고자 한다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.101-106
• /
• 1996

For the application of the neutron flux mapping, an accurate calculation of the sensitivity is required because the sensitivity is proportional to the neutron flux density. Sensitivity is defined as the current per unit length per unit neutron flux and it mainly depends on the depression factor(f), the escape probability from the emitter($\varepsilon$1) and the charge build-up factor of the insulator layer(c). A Monte Carlo simulation was accomplished to calculate the sensitivity of rhodium emitter material and alumina(Al$_2$O$_3$) insulator with a cylindrical geometry, based on the (n,${\beta}$) interaction and on other interaction including the secondary electron generation for the more accurate estimation of the sensitivity. From the simulation results, factors fur the sensitivity were accurately calculated and compared with other theoretical and experimental values. In addition, the sensitivity linearly increases and saturates as the emitter radius increases. The accomplished method is useful in the analysis for the change of SPND sensitivity as a function of burn-up and in the optimum design of SPND.

• 복식
• /
• 제66권2호
• /
• pp.1-14
• /
• 2016

This study was intended to investigate the influences that consumer's price sensitivity, bundle discount type, and price level of the male cosmetics have on consumer attitude. The design of this research was comprised of $2{\times}2{\times}2$ mixed design studies. The first element was high price sensitivity vs. low sensitivity, the second element was the bundle discount type (mixed leader vs. mixed-joint), and the third element was the price level of male cosmetics (high-price brand vs. low-price brand). The results of this study showed that price sensitivity, bundle discount type and price level of male cosmetic had a statistically significant interaction effect on the consumer's quality perception. The quality perception of low-cost brands for high price sensitivity/mixed-joint bundle group was low. The quality perception of low-cost brands for mixed-leader bundled groups did not change significantly even when the price sensitivity became higher. However, it can be seen as the same result that the overall value is higher when suggested the price information in Mixed-leader bundle than Mixed-joint bundle. In particular, this study suggests that price information should be presented in mixed-leader bundles for high price sensitivity and low cast brands.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.33-39
• /
• 1998

A six-beam accelerometer with self-compensated off-axis sensitivity was fabricated onthe selectively diffused (111)-oriented n/n$^{+}$/n silicon substrates by a unique porous silicon micromachining technique, which has self-stip characteristics and highly seletive formation of porous silicon layer during anodic reaction. Also, the characteristics of the fabricated accelerometer were investigated. The sensitivity of the acceleormeter added up outputs of three bridges through a summing circuit was 0.68 mV/g and the nonlinearity was less than 2% of the full scale output. The measured first resonant frequency was 4.236 kHz. When the outputs of three bridges were compared to summing output of bridges obtained through summing circuit, the normal output for Z-axis acceleration exhibited the same value s summing outputs of three bridges without reduction of sensitivity and thus the sensitivity decrease due to additional beam was compensated. Although a maximum off-axis sensitivity in one bridge of the accelerometer showed 17% of normal sensitivity, the off axis sensitivity obtained from summing output of three bridges decreased to 1.0%. Therefore, the self-elimination of off-axis sensitivity can be simply realized by obtaining the output of the sensor through summing circuit.t.

• 한국가족관계학회지
• /
• 제22권2호
• /
• pp.51-69
• /
• 2017

Objectives: The purpose of this study was to examine the associations and paths among parenting behaviors, cyber delinquency, and moral sensitivity in adolescents to reduce and prevent cyber delinquency. Method: The data was collected by a survey for 270 students from a middle school and a high school in G city. The valid 262 cases were analyzed by frequency, descriptive analysis with SPSS 18.0 and tested by structural equation model by using AMOS 18.0 program. Results: Results showed that 1) 'control' among the parenting behaviors has positive effects on the cyber delinquency in adolescents, 2) 'intimacy and rationality' among the parenting behaviors has positive impacts on the moral sensitivity, 3) it shows that moral sensitivity has negative effects on the cyber delinquency in adolescents, and 4) bootstrapping test for indirect effect of moral sensitivity was verified significantly. We founded the full mediation of moral sensitivity and the path of 'intimacy and rationality' to cyber delinquency through moral sensitivity. Conclusions: The results implied 1) provision of the parent education and program for parents and newlyweds to learn positive parenting behaviors and 2) application of moral education to develop moral sensitivity of adolescents in schools and communities.

• Tribology and Lubricants
• /
• 제40권4호
• /
• pp.139-143
• /
• 2024

This study evaluates the sensitivity of a ferrous particle sensor in response to changes in viscosity in a gearbox. Composed of various gears, the gearbox typically occurs significant ferrous wear due to gear contact. Condition monitoring is primarily implemented by measuring the number of ferrous wear particles in the lubricant. Gearboxes are critical in many systems, including wind turbines, for facilitating changes in speed and torque. Therefore, technology to monitor ferrous particles in gearboxes is essential. In this study, a simplified gearbox is numerically modeled to assess sensor sensitivity based on viscosity and sensor position. Three sensor positions are considered: one directly beneath the gear and two at locations farther from the gear. Analyses are conducted using lubricants with low viscosity and gear oil. Sensor sensitivity is defined by the number of ferrous particles adhering to the sensor, where more particles indicated higher sensitivity. The evaluation reveals that the position directly beneath the gear exhibits the highest sensitivity due to direct influence from the main flow. To achieve optimal sensitivity, sensors should be installed in the main flow path as determined by flow analysis. Evaluation of sensor sensitivity with changes in viscosity shows that a higher viscosity results in a lower sensor sensitivity. Therefore, for ease of analysis, performing an analysis under low-viscosity conditions is useful for understanding the main flow and for identifying the optimal location for proper sensor position.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.492-497
• /
• 2004

Three methods for design sensitivity such as numerical differentiation, analytical method and semi-analytical method have been developed for the last three decades. Although analytical design sensitivity analysis is exact, it is hard to implement for practical design problems. Therefore, numerical method such as finite difference method is widely used to simply obtain the design sensitivity in most cases. The numerical differentiation is sufficiently accurate and reliable for most linear problems. However, it turns out that the numerical differentiation is inefficient and inaccurate because its computational cost depends on the number of design variables and large numerical errors can be included especially in nonlinear design sensitivity analysis. Thus semi-analytical method is more suitable for complicated design problems. Moreover semi-analytical method is easy to be performed in design procedure, which can be coupled with an analysis solver such as commercial finite element package. In this paper, implementation procedure for the semi-analytical design sensitivity analysis outside of the commercial finite element package is studied and computational technique is proposed, which evaluates the pseudo-load for design sensitivity analysis easily by using the design variation of corresponding internal nodal forces. Errors in semi-analytical design sensitivity analysis are examined and numerical examples are illustrated to confirm the reduction of numerical error considerably.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.204-212
• /
• 2021

Ethical sensitivity is a basic competency required for nursing students to work as professionals who will care patients in the clinical field after graduation. Therefore, efforts are needed to improve the knowledge on ethical sensitivity in undergraduate education. This study aimed to identify the demographic characteristics that influence ethical sensitivity among nursing students. This study was a secondary analysis that referred to a previous work measuring ethical sensitivity in nursing students. The participants were 128 nursing students, who had experienced clinical practicums. Among the participants, those who were third-year (t=2.345, 95% CI=[1.24, 14.64], p=0.021), female (t=2.635, 95% CI=[3.65, 25.69], p=0.009) and were satisfaction with major (t=-2.389, 95% CI=[-16.54, -1.50], p=0.019) consistently reported significantly higher mean scores on ethical sensitivity. The explanatory power of the model was 13.3%. Gender (Exp (B)=0.875, 95% CI=[0.804, 0.952], p=0.002) and year at universtiy were the strongest predictors of ethical sensitivity (Exp (B)=0.921, 95% CI=[0.873, 0.971], p=0.002). Based on the results, an appropriate ethics education that considers the following issues should be provided for undergraduate nursing students: both genders' perspectives, seniors' further development, and students experiencing low satisfaction with their major. Future nursing education should consider these individual demographic characteristics to develop nursing students' ethical sensitivity that will further affect their ethical behavior and ultimately improve the quality of nursing.