• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.334-342
• /
• 2012

It is connected with various gauges existing in Euro-Asian continents. Such differences impedes the operation seriously as on the contact of railway tracks of different gauge the cargo must be either transshipped or the running assemblies of rail vehicles must be exchanged. Those operations are costly, time-consuming and require extended infrastructure together with very expensive storage and transshipment facilities at border-crossing point. Moreover, those operations extend transportation time considerably. Therefore, effectiveness of railway transportation systems significantly depends on track gauge change 1435/1520mm, which connects with complicated handling-shifting operations. The paper concerns assessment of effectiveness in strategical rail systems with gauge changing. The paper presents short description of transport system with gauge changing and initial assessment of shifting technologies. Method of system assessment comparison based on Life Cycle Cost model is described here as well.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.589-600
• /
• 1998

This study was planned to verify the usefulness of Latin square design method in fatigue tests of cables and to see the axial fatigue behavior of wire ropes being used as hangers in suspension bridges. Three parameters : mean stress, stress range. and specimen length, were adopted for verification. The effects of these parameters are in argument except for stress range. Three classes in each parameter were used. Triple replication was performed in each cell to increase the number of replication (or degree of freedoms). The major cause of fatigue failure was fretting fatigue at trellis contact point. Three chosen parameters were proved to be significant. It was verified that the effect of stress range was in agreement with expectation, but the effect of specimen length was contrary to the expectation. It was also observed that the effect of mean stress depended upon the chosen level. Therefore Latin square design method is effective for verifying the parameters that affect fatigue behaviour under orthogonality conditions.

• Journal of the Korean Dietetic Association
• /
• v.12 no.4
• /
• pp.404-410
• /
• 2006

This study was done to analyze the contents of food and nutrition information sites on the internet. In analysis, 276 web sites were used. Web sites from 3 internet search engines(Yahoo, Empas, Naver) were selected on the date of July 15th, 2004. The trained panels evaluated web sites' contents by the assessment tools using 3-point scale(2:strongly agree, 1:agree, 0:disagree). The contents classified by topics were functional foods(46.4%), cuisine and cooking(38.4%), food sanitation and safety(30.4%) and so on. Operators of web sites were individual(35.9%), company(30.4%) and public institution(33.7%). About 89.5% of web sites were operated for unspecified people. Contents of the web sites were well established especially in consistency in title and contents(1.6), scientific basis of explanations(1.2) and benefit of information(1.2) and so on while not well established in providing relevant sites(0.7), providing contact address and feed back mechanism(0.7) and so on. Web sites operated by public institutions are rated significantly higher than web sites operated by individual or company. In conclusion, in order to qualitatively improve food and nutrition information on the internet, continuing monitoring and evaluation are highly required and web sites operated by public institutions shall be developed further.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.285-291
• /
• 2011

Membrane fouling is an unavoidable phenomenon and major obstacle in the economic and efficient operation under sea water reverse osmosis (SWRO). When fouling occurs on the membrane surface, the permeate quantity and quality decrease, the trans-membrane pressure (TMP) and operation costs increase, and the membrane may be damaged. Therefore, chemical cleaning process is important to prevent permeate flow from decreasing in RO membrane filtration process. This study focused on proper chemical cleaning condition for Shuaibah RO plant in Saudi Arabia. Several chemical agents were used for chemical cleaning at different contact time and concentrations of chemicals. Also autopsy analysis was performed using LOI, FT-IR, FEEM, SEM and EDX for assessment of fouling. Specially, FEEM analysis method was thought as analyzing and evaluating tool available for selection of the first applied chemical cleaning dose to predict potential organic fouling. Also, cleaning time should be considered by the condition of RO membrane process since the cleaning time depends on the membrane fouling rate. If the fouling exceeds chemical cleaning guideline, to perfectly remove the fouling, certainly, the chemical cleaning is increased with membrane fouling rate influenced by raw water properties, pre-treatment condition and the point of the chemical cleaning operation time. Also choice of cleaning chemicals applied firstly is important.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.105-112
• /
• 2022

The national defense requires uninterrupted decision-making, even under direct or indirect impacts on non-traditional threats such as infectious diseases. Since all work utilizes the information system, it is very important to ensure the availability of the information system. In particular, in terms of security management, defense work is being performed by dividing the network into a national defense network and a commercial Internet network. This study suggests a work execution plan that takes into account the efficiency of work performed on the Internet and the effectiveness of security through effective defense information system operation. It is necessary to minimize the network contact point between the national defense network and the commercial Internet, and to select a high-priority one among various tasks and operate it efficiently. For this purpose, actual cases were investigated for "A" institution and characteristics were presented. Through the targeted tasks and operation plans to improve the effectiveness of defense tasks and ensure security, presented in this paper, it will be possible to increase the availability of task performance even in non-traditional threats such as infectious diseases.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.50-56
• /
• 2003

A freshwater bloom-forming cyanobacterium, Microcystis aeruginosa, and local soil isolate Scytonema sp. strain BT 23 were demonstrated to contain biotoxic secondary metabolites with pesticidal and mosquito larvicidal activities. A purified toxic constituent from M aeruginosa showed an absorption maximum at 230 nm and its toxicity symptoms, Rf value on TLC, and retention time observed ill an HPLC analysis were similar to those of the hepatotoxic heptapeptide microcystin-LR. The bioactive constituent of the Scytonema sp. was less polar in nature and exhibited two peaks at 240 and 285 m. When applied to two cruciffrous pests, Pieris brassicae and Plutella flostella, the crude extracts and toxic principles from the two cyanobacteria showed significant antifeedant activity in a no-choice bioassay, and at higher concenuations exhibited contact toxicity to the insect larvae. The purified toxin from M. aeruginosa was found to be more effective and produced 97.5 and $92.8\%$ larval mortality in the two pests, fo11owing 2 h of toxin treatment at a concentration of $25{\mu}g$ Per leaf disc (2.5 cm dia.). Meanwhile, similar treatment with the purified toxin from Sytonema sp. stain BT 23 only produced 73 and $78\%$ mortality in the two pests. The cyanobacterial constituents also showed significant activity against Culex and Anopheles larvae. The M. aeruginosa toxin ($20{\mu}g\;ml^-1$) caused 98.2 and $88.1\%$ mortality in the Culex and Anopheles larvae, respectively, while the purified toxin from the Sytonema sp. was less toxic and only produced a 96.3 and $91.2\%$ mortality, respectively, at a much higher concentration ($40{\mu}g\;ml^-1$). Accordingly, the current results point to certain hitherto unknown biological properties of cyanobacterial biotoxins.

• The Journal of Society for e-Business Studies
• /
• v.26 no.1
• /
• pp.67-78
• /
• 2021

The number of domestic e-commerce transactions has been breaking its own record by an annual average growth rate of over 20% based on volume for the past 5 years. Due to the rapid increase in e-commerce market, retail companies that have difficulty meeting consumers in person are in fierce competition to take the lead in the last mile service, which is the only point of contact with customers. Especially in the delivery area, where competition is most intense, the role of the fulfillment center is very important for service differentiation. It must be capable of fast product preparation ordered by consumers in accordance with the delivery service level. This study focuses on the order picking system for rapid order processing in the fulfillment center as an alternative for companies to gain competitive advantage in the e-commerce market. A mixed integer programming model was developed and implemented to optimize the stock replenishment in order picking facilities. The effectiveness was scientifically and objectively verified by simulation using the actual operation process and data.

• Journal of Engineering Education Research
• /
• v.27 no.1
• /
• pp.3-12
• /
• 2024

The degree-linked programs for employees, operated by joint training centers in specialized universities that have implemented work-study integrated programs, are educational programs that require an annual government budget of around 80 billion KRW. However, the 70+ universities running these programs face issues such as a decline in academic achievement and an increase in dropout rates among students. In this paper, I conducted multiple regression analysis based on observed and measured information to examine whether the participating students in these programs are achieving an appropriate level of academic performance and to identify the factors that universities need to invest in to achieve that level. To do this, I hypothesized a causal relationship between the university's input factors and students' academic achievement, and used the SPSS program to analyze the statistical data, confirming the validity of the hypothesis. The collected data for the study were obtained through a survey developed using a Likert 4-point scale, which quantified the distribution of grades among students enrolled in IT-related departments offering the degree-linked programs for employees and the emotional contact efforts made by the universities to motivate them for academic success. Particularly, through the results of multiple regression analysis, it was confirmed that these input factors, unlike those for students in general education programs, require more personalized and frequent interactions.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.139-145
• /
• 2012

Electric activity of cardiac muscles generates magnetic fields. Magnetocardiography (or MCG) technology, measuring these magnetic signals, can provide useful information for the diagnosis of heart diseases. It is already about 40 years ago that the first measurement of MCG signals was done by D. Cohen using SQUID (superconducting quantum interference device) sensor inside a magnetically shielded room. In the early period of MCG history, bulky point-contact RF-SQUID was used as the magnetic sensor. Thanks to the development of Nb-based Josephson junction technology in mid 1980s and new design of tightly-coupled DC-SQUID, low-noise SQUID sensors could be developed in late 1980s. In around 1990, several groups developed multi-channel MCG systems and started clinical study. However, it is quite recent years that the true usefulness of MCG was verified in clinical practice, for example, in the diagnosis of coronary artery disease. For the practical MCG system, technical elements of MCG system should be optimized in terms of performance, fabrication cost and operation cost. In this review, development history, technical issue, and future development direction of MCG technology are described.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.259-267
• /
• 2005

The effects of hull flexibility on shaft alignment are growing as ship sizes are increased mainly for container carrier and LNG carrier. In order to consider hull flexibility on a propulsion shafting system, standardization of ship service conditions is necessary because hull deformation is continuously variable according to ship service conditions. How to summarize ship service conditions is suggested based on practically applicable four viewpoints : hull, engine, loading and sea status. Effects of the external forces acting on a ship propulsion shafting system are generally commented. Several design criteria regulated by classification societies are pointed at issue which seems to have Insufficient technical background. A qualitative verification is carried out to point out the invalidity of the assumption of effective supporting position. In this work, an elastic nonlinear multi-supporting bearing system is introduced as a key concept of the elastic shaft alignment. Hertz contact theory is proved to be more proper one than projected area method in calculation of the nonlinear elastic stiffness of the bearing, The squeezing and oil film pressure calculations in the long journal bearing like an after stern tube bearing are recognized as a necessary process for elastic shaft alignment design.