• 한국컴퓨터정보학회지
• /
• 제2권1호
• /
• pp.121-129
• /
• 1995

결함 시뮬레이션은 테스트 생성의 중요한 과정이며 테스트가 올바른지 검증하거나 결함사전을 작성하는 데에 쓰인다. 본 논문에서는 회로의 신뢰성을 검증하기 위해 사용되는 테스트 패턴을 효율적으로 생성하기 위하여 역추적 결함 시뮬레이션 알고리즘을 제안하였다. 제안한 알고리즘의 기본구성은 초기화 과정, 역추적 결함 시뮬레이션 과정 및 입력패턴의 변화가 생겼을 때 즉 리스트변화가 있을때의 재계산 과정 등 3부분으로 되어 있다. 기본개념은 역추적 과정에서 출력선을 제어하지 못하는 입력을 커팅하므로서 최소의 결함리스트를 유지하는 것이며 리스트의 변화가 생겼을 때 논리변화가 일어나는 신호선만 재계산한다. 제안한 알고리즘은 기억장소의 요구도를 O(n)으로 줄이고 수행시간을 향상시켜 효율적임을 보인다.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1445-1453
• /
• 2017

In this paper, we propose a fault detection model based on multi-layer neural network using data mining technique for faults due to boiler tube leakage in a thermal power plant. Major measurement data related to faults are analyzed using statistical methods. Based on the analysis results, the number of input data of the proposed fault detection model is simplified. Then, each input data is clustering with normal data and fault data by applying K-Means algorithm, which is one of the data mining techniques. fault data were trained by the neural network and tested fault detection for boiler tube leakage fault.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.164-168
• /
• 2010

The transformer is expected to be an essential component of a superconducting fault current limiter (SFCL) for both the increase of its voltage ratings and the simultaneous quench due to different critical current between high-$T_C$ superconducting (HTSC) elements comprising the SFCL. However, in order to perform the effective current limiting operation of the SFCL, the design for the SFCL considering the hysteresis characteristics of the iron core is required. In this paper, the influence of the hysteresis characteristics of the iron core comprising the transformer type SFCL on its current limiting characteristics was investigated. Through the comparative analysis on the hysteresis curves due to the ratio of the turn number between the 1st and the 2nd windings of the transformer, the proper design condition for the ratio of the turn number to achieve the effective current limiting operation of the transformer type SFCL could be obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2188-2191
• /
• 2005

We consider a fault detection and isolation problem for inertial navigation systems which use redundant inertial sensors. We propose a FDI method using average of multiple parity vectors which reduce false alarm and wrong isolation, and improve correct isolation. We suggest the number of redundant sensors required to isolate simultaneous faults. The performance of the proposed FDI algorithm is analyzed by Monte-Carlo simulation.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.423-426
• /
• 2006

Distance relays achieve selective tripping by measurement of all short circuit fault conditions inside set reaches. The direction of the fault, forward or reverse is commonly determined with a dedicated measurement to ensure selectivity under all conditions. For the direction decision (measurement) a number of alternatives are available. This paper describes a loop selective direction measurement and illustrates by means of a typical fault why this is superior to a non loop selective direction measurement such as that based on negative sequence quantities.

• 한국통신학회논문지
• /
• 제24권10B호
• /
• pp.1807-1814
• /
• 1999

본 논문은 고장 감내형 셔플스위치망에서 단순스위치의 고장에 따른 교환시스템의 성능저하를 특성화하기 위한 연결성 관련 신뢰성 척도를 다루고 있다. 상호 연결 가능한 평균 입출력 쌍의 수, 최소한 한 개 이상의 출력으로 연결 가능한 평균 입력의 수, 그리고 한 개 이상의 출력과 연결된 입력으로부터 실제 연결 가능한 평균 출력의 수를 연결성 척도로 고려한다. 단일경로 SEN과 이를 고장 감내화시킨 SEN+ 및 INDRA망에 대해 언급된 세가지 연결성 척도에 대한 평가방법을 제시한다. 이를 바탕으로 수치실험을 통한 망들의 비교, 분석이 이루어진다.

• 한국통신학회논문지
• /
• 제31권8B호
• /
• pp.701-706
• /
• 2006

System-level diagnosis plays an important technique for fault detection in multi-processor systems. Efficient diagnosis is very important for real time systems as well as multiprocessor systems. Feng(1) proposed two adaptive diagnosis algorithms HADA and IHADA for hypercube system. The diagnosis cost, measured by diagnosis time and the number of test links, depends on the number and location of the faults. In this paper, we propose an adaptive diagnosis algorithm using the syndrome analysis. This removes unnecessary overhead generated in HADA and IHADA algorithm sand give a better performance compared to Feng's Method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2003

The enterprise find a solution to the problems such as a reduction of manufacturing period, accurate analysis for customer demand, improvement for customer service and rise of manufacture accomplishment. Internet is a good solution to such problems. Internet offers WWW(World Wide Web), remote control, file transfer and e-mail service. Among the services, WWW takes large portion because of convenient GUI, easy information search and unlimited information registration. Remote Monitoring Server(RMS) system that uses network service is constructed for chip mounter. Hardware base consists of RMS, chip mounter and C/S(Customer Service) server. Software includes DBMS and various modules in server home page. This provide product number, bad product number, trouble code, content and countermeasure in real-time information module, user information in setup module, detailed error information in fault diagnosis module, fault history in fault history module and customer information in customer service management module.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.35-41
• /
• 2006

This paper presents a new numerical algorithm for fault location estimation and for faults recognition based on the synchronized phasors. The proposed algorithm is based on the synchronized phasor measured from the synchronized PMUs installed at two-terminals of the transmission lines. In order to discriminate the fault type, the arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent or transient. The results of the proposed algorithm testing through computer simulation are given.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.76-85
• /
• 2016

This paper presents a method of decision on where bus splitting is needed to reduce fault current level of power systems and to satisfy the fault current constraints. The method employs a modified fault current constrained optimal power flow (FCC-OPF) with X variables for the candidate locations of splitting and for decision making on whether to split or not, it adopts soft-discretization by augmenting inversed U-shaped penalty terms. Also, this paper discusses the procedure on the adequate selection of bus splitting locations based on the results of the modified FCC-OPF, to reduce the total number of the actions taken.