• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.74-83
• /
• 2009

Recently, usage of electric and electronic system for car increases rapidly. Consequently power monitoring supplied to the system is essential for management and controlling. Generally, battery status is monitored through measuring and diagnosing the current measurement method utilizing Hall Effect. Therefore, in this paper, we analysed magnetic field to develop the solution of DC current sensor using Hall Effect which is the core of design and development. By analysing the magnetic field by FEM using Maxwell 3D software, the location of the highest output current and stable part in the Hall IC sensor was shown. Also, the optimal core design of DC current sensor using parametric and Simplex method was presented. A car battery charge and discharge process dependant on time effect on the changing of magnetic field was simulated and compared to the result from the experiment result of actual vehicle.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
• /
• pp.241-244
• /
• 2006

본 논문은 지구자계를 이용하여 3축 자계센서의 수직 성분자계를 보정하는 방법과 장치를 제안한다. 자계센서는 설치각도 및 이득오차에 의해 출력 특성이 변화한다. 따라서 자계센서를 사용하기에 앞서 보정이 필요하다. 지구에서 발생되는 지구자계를 이용하여 간편하게 센서의 설치각도 및 이득오차에 의한 영향을 보정하였으며 이를 위한 장치를 설계하였다. 제안한 방법은 실험을 통하여 실용성을 검증하였다.

• 센서학회지
• /
• 제32권4호
• /
• pp.232-237
• /
• 2023

This paper presents a system for estimating the position of a magnet using a magnetic sensor. An algorithm is presented to analyze the waveform and output voltage values of the magnetic field generated at each position when the magnet moves and to estimate the position of the magnet based on the analyzed data. Here, the magnet is sufficiently small to be inserted into a blood vessel and has a micro-magnetic field of hundreds of nanoteslas owing to the small size and shape of the guide wire. In this study, a highly sensitive magneto-impedance (MI) sensor was used to detect these micro-magnetic fields. Nine MI sensors were arranged in a 3×3 configuration to detect a magnetic field that changes according to the position of the magnet through the MI sensor, and the voltage value output was polynomially regressed to specify a position value for each voltage value. The accuracy was confirmed by comparing the actual position value with the estimated position value by expanding it from a 1D straight line to a 3D space. Additionally, we could estimate the position of the magnet within a 3% error.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.92-98
• /
• 2015

The magnetoelectric characteristics on layered Ni-PZT-Ni, Co, Fe composites by epoxy bonding for magnetic field sensor were investigated in the low-frequency range. The ME coefficient of Ni-PZT-Ni, Ni-PZT-Co and Ni-PZT-Fe composites reaches a maximum of $200mV/cm{\cdot}Oe$ at $H_{dc}=110$ Oe, $106mV/cm{\cdot}Oe$ at $H_{dc}=90$ Oe and $87mV/cm{\cdot}Oe$ at $H_{dc}=160$ Oe, respectively. A trend of ME charateristics on Ni-PZT-Co, Ni-PZT-Fe composites was similar to that of Ni-PZT-Ni composites. The ME output voltage shows linearly proportional to ac field $H_{ac}$ and is about 0~150 mV at $H_{ac}$=0~7 Oe and f=110 Hz in the typical Ni-PZT-Ni sample. The frequency shift effect due to the load resistance $R_L$ shows that the frequency range for magnetic field sensor application can be modulated with appropriate load resistance $R_L$. This sample will allow for a low-magnetic ac field sensor in the low-frequency (near f=110 Hz).

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.159-164
• /
• 2012

In this paper, it tried to develop the core sensor for detection of micro magnetic field in electric wires. The sensor is non contact type and is consisted of ferrite core for low price. To investigate their properties for variations of current, it changed the number of winding and the length of sample core, it examined, to check the live wire situation in built-in wires, electrical characteristics due to difference between electric wires and core sensor. As the results, it verified live wire situation at the number of winding(5,000) and within length of 6[cm]. Also, it obtained magnetic field magnitude decreased inverse proportion ratio to a square about difference between electric wires and core sensor.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3114-3120
• /
• 2023

A high-accuracy magnetic field measurement device based on a cyclotron is being developed for accelerator mass spectrometry (AMS). In this study, a magnetic field measurement device consisting of a Hall probe sensor, piezo-motor, and step motor was developed to measure the magnetic field of the AMS cyclotron magnet. The Hall probe sensor was calibrated to achieve positional accuracy by using polar coordinates. The measurement results between the ratchet gear and piezo-motor, which are the instruments used for driving the measurement device, were analyzed. The measurement result of the device with a piezo-motor exhibits a difference of 5 Gauss (0.04%) as compared with the simulation result.

• 센서학회지
• /
• 제8권4호
• /
• pp.308-313
• /
• 1999

본 논문에서는 TMAH를 이용한 비등방성 에칭기술을 이용하여 3차원의 자장의 값을 측정하기 위한 경사각 구조의 3차원 자기센서를 제작하였다. 제작된 3차원 자기센서는 비등방성 식각에 의하여 [100] 결정방향의 Si 표면에 [111] 결정방향의 경사면을 구성하여 이 경사면에 경사각 Hall 소자를 제작하였으며, 기존의 3차원 자기센서에 비하여 개선된 감도 특성을 나타내었다. 제작된 소자의 적감도는 547V/AT 이었으며 자기센서 출력의 PSD 성분의 측정에 의해 계산 되어진 최소측정 자장은 0.07G 이었다.

• 센서학회지
• /
• 제19권3호
• /
• pp.221-229
• /
• 2010

In recent studies, many methods have been studied for mobile robot using magnetic markers on its pathway. This is not influenced by the weather conditions, and makes possible to develop controller with low level processors and simple algorithms. However, the interval between magnets is restricted by the magnetic field intensity and it is impossible to get road information ahead. This paper suggests a method of widening markers and expressing the road information ahead using magnetic markers, and explains a sensor arrangement considering suggested methods. Also, magnetic field analysis was done to investigate the effects of widening magnetic markers with various environments. A small mobile robot was made to figure out the performance of suggested methods, and driving experiments were performed on the straight and curved road with magnetic markers. The results show that the robot moved the prearranged pathway with 0.5 cm lateral displacements and stopped at a stop line using magnetic information on the road.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.253-257
• /
• 2017

Nowadays, it is increasingly important to detect whether cables are live for the operator's safety if there is a sudden power failure. It is especially hard to detect the electrical field of an underground line because of shielding. This paper on detection of live-line states in cables studied the detection characteristics of the change in the magnetic field and axis as the frequency, voltage, and distance at the same load are changed using 3 axes. A search coil type was used as a magnetic field sensor with non-contact. We found that magnetic fields decrease proportionally to the square of the distance and the decrease of rated voltage with load effected to magnetic field. The magnetic field was detected by 3-axis sensors given correct proximity, but appeared as noise components beyond a distance of 2 cm.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.47-53
• /
• 2010

In this research project, development of methodology to measure the thickness of pipes in the wide range using magnetic field. The magnetic field spreading in the sensor and the plate was modeled in the cases of the various thicknesses in plate. Based on the analysis, sensors were designed, manufactured and tested to optimize the specifications of the sensor. The sensor can be used in high temperature through calibration. And the uncertainty of the sensor was estimated.