Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

A Study on the Magnetic Field Analysis and Optimal Core Design of DC Current Sensor for Vehicles

자동차용 DC Current Sensor의 자장해석 및 코어 최적형상 설계에 관한 연구

  • Published : 2009.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, usage of electric and electronic system for car increases rapidly. Consequently power monitoring supplied to the system is essential for management and controlling. Generally, battery status is monitored through measuring and diagnosing the current measurement method utilizing Hall Effect. Therefore, in this paper, we analysed magnetic field to develop the solution of DC current sensor using Hall Effect which is the core of design and development. By analysing the magnetic field by FEM using Maxwell 3D software, the location of the highest output current and stable part in the Hall IC sensor was shown. Also, the optimal core design of DC current sensor using parametric and Simplex method was presented. A car battery charge and discharge process dependant on time effect on the changing of magnetic field was simulated and compared to the result from the experiment result of actual vehicle.

Keywords

References

  1. B, K, Joo, A Car Sensor Technique which Applies MEMS Technique & A Trend, Vol.1284, IlTA, 2007
  2. C,-H, Kim, B,-G. Jung and L-H, Yang, "A Study on the Sensorless Realization of Magnetic Levitation System," KSNVE, Vol.8, No.1, pp.195-203,1998
  3. J.H. Yang, G.G. Jeong, H.H. Jeong and S,K. Son, "A Basic Study of Displacement Measurement of Magnetic Bearing System Using Hall Effect Sensor," KSPSE, Vol.11, No.2, pp.1-2, 2007
  4. C.-K. Chun and C.-U. Kim, "Current Sensorless Three Phase PWM ACIDC Boost Converter with Unity Power Factor," Journal of the Korean Institute of Illuminating and Electrical Installation Engineering Vol.17, No.6, pp.105- 112,2003 https://doi.org/10.5207/JIEIE.2003.17.6.105
  5. K.-H. Kim, "An Adaptive Current Control Scheme of an AC Servo Motor for Performance Improvement of a Servo Drive," Journal of KIEE, Vol.20, No.6, 2006
  6. K. S. Lee, "Various Considerations in Designing Stable Electrooptic Voltage and Magnetooptic Current Sensors," Proc. of 8th Optic & Quantum- Electronics Workshop, pp.103-108, 1991
  7. M. Noh and M.-K. Jeong, "The Effect of Currents and Hystreresis on the Performance of Inductive Position Sensor for Magnetic Bearings," KSME Spring B, pp.36-41, 2001
  8. B. Kim, Let's Apply the Sensor, pp.411-412, Hanjin, 2006
  9. R. Dickinson and S. Milano, Isolated Open Loop Current Sensing Using Hall Effect Technology in an Optimized Magnetic Circuit, Allegro Microsystems, Inc. 162 Pembroke Rd. Concord NH, 03301 USA, 2002
  10. S.T. Loney, "Design of Compound Solenoids to Produce Highly Homogeneous Magnetic Field," J. Inst. Maths Applics, Vol.2, pp.111-125,1996 https://doi.org/10.1093/imamat/2.2.111
  11. Maxwell2D/3D Ver.12 Manual