• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.691-695
• /
• 2012

수위표의 영점에서 수면까지의 높이로 정의되는 해발수위는 유량 및 유사량 등과 같은 관련 수문자료를 생산하는데 기본이 되는 자료이며, 하천 및 수공구조물의 설계 등에 기초자료로 이용될 뿐만 아니라 수자원의 효율적인 관리 및 수문순환 해석을 위한 가장 중요한 기초자료로서 국가 차원의 올바른 수자원 계획과 정책을 수립하는데 널리 활용된다. 이와 같이 해발수위자료의 이용 분야가 다양하고 그 자체로서도 중요한 의미를 가지는 점을 고려할 때 무엇보다도 중요한 것은 자료의 품질이 확보되어야 하는 것이다. 그러나 영점표고검정수준점 및 기준 수위표의 설치 이후 오랜 시간이 경과됨에 따라 노후화와 수위관측소 주변의 환경변화가 발생하게 되어 자료의 정확도가 매우 낮아지고 있다. 본 연구에서는 해발수위 자료의 품질향상을 위해 수위관측소의 영점표고검정수준점 및 수위표 영점표고에 대하여 수준측량 및 RTK(Real Time Kinematic) GPS(Global Positioning System) 측량을 병행하여 수행하였으며, 조사측량된 값을 활용하여 기존에 측량된 영점표고검정수준점 및 수위표 영점표고에 대한 검토를 수행하였다. 금강 및 삽교천 수계에 위치한 50개 수위관측소 대하여 기존 측량값과 비교 검토한 결과 영점표고검정수준점은 0.10m 이하(54.0%), 0.10m 초과 ~ 0.50m 이하(26.0%), 0.50m 초과 ~ 1.00m 이하(6.0%), 1.00m초과 ~ 1.50m 이하(2.0%), 1.50m 초과 ~ 2.00m 이하(2.0%), 2.00m 초과 ~ 3.00m 이하(4.0%), 3.00m 초과(6.0%)의 값을 나타냈으며, 수위표 영점표고는 0.10m 이하(50.0%), 0.10m 초과 ~ 0.50m 이하(32.0%), 0.50m 초과 ~ 1.00m 이하(10.0%), 1.00m초과 ~ 1.50m 이하(2.0%), 1.50m 초과 ~ 2.00m 이하(2.0%), 2.00m 초과 ~ 3.00m 이하(2.0%), 3.00m 초과(2.0%)의 값을 가졌다. 이와 같이 기존과 금회 측량자료를 비교 검토한 결과 대부분이 안정적으로 유지되고 있으나 일부 수위관측소에서 변동량이 크게 발생한 원인은 영점표고검정수준점의 노후화, 기준 수위표의 교체 및 위치 변동, 인위적인 하천공사 등으로 인하여 발생한 것으로 판단된다.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.59-69
• /
• 2011

Construction works have become larger and more complex, improving productivity by introducing Information Technology (IT) is pursued. In this circumstance, many different kinds of project management system is being introduced, and various IT technologies are applied such as Personal Digital Assistant (PDA), Bar Code, Radio Frequency Identification (RFID), Web Camera, and so on. However, these kinds of technologies might cause reprocessing of information and ineffectiveness of project because of lack of real time information processing technology or separation between construction sites and management offices. Therefore, this research aims to develop Application that can be applied efficiently for construction material management, by understanding problems of former management system with questionnaires and extracting functions with analysis of requirements. This will be possible to input information automatically, to process and check material information in real time, and to identify the location of necessary material. Then, the problem of separation between construction sites and management offices are solved, and as a result, more efficient management of materials in construction sites will become possible.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.1-14
• /
• 2012

Traffic management centers (TMC) collect real-time traffic data from the field and have powerful databases for analysing, recording, and archiving the data. Recent advanced sensor and communication technologies have been widely applied to intelligent transportation systems (ITS). Regarding sensors, various in-vehicle sensors, in addition to global positioning system (GPS) receiver, are capable of providing high resolution data representing vehicle maneuverings. Regarding communication technologies, advanced wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-vehicle infrastructure (V2I), which are generally referred to as V2X, have been widely used for traffic information and operations (references). The V2X environment considers the transportation system as a network in which each element, such as the vehicles, infrastructure, and drivers, communicates and reacts systematically to acquire information without any time and/or place restrictions. This study is motivated by needs of exploiting aforementioned cutting-edge technologies for developing smarter transportation services. The proposed system has been implemented in the field and discussed in this study. The proposed system is expected to be used effectively to support the development of various traffic information control strategies for the purpose of enhancing traffic safety on highways.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.385-390
• /
• 2016

ELoran Systems can provide Position, Navigation, and Time services with comparable performance to Global Positioning Systems (GPS) as a back up or alternative system. High timing and navigation performance can be achieved by eLoran signals because eLoran receivers use "all-in-view" reception. This incorporates Time of Arrival (TOA) signals from all stations in the service range because each eLoran station is synchronized to Coordinated Universal Time (UTC). Transmission station information and the differential Loran correction data are transmitted via an additional Loran Data Channel (LDC) on the transmitted eLoran signal such that eLoran provides improved Position Navigation and Timing (PNT) over legacy Loran. In this paper, we propose a technique for adapting the delay time compensation values in eLoran timing receivers to provide precise time comparison. For this purpose, we have designed a system that measures time delay from the crossing point of the third cycle extracted from the current transformer at the end point of the transmitter. The receiver delay was measured by connecting an active H-field, an E-field and a passive loop antenna to a commercial eLoran timing receiver. The common-view time transfer technique using the calibrated eLoran timing receiver improved the eLoran transfer time. A eLoran timing receiver calibrated by this method can be utilized in the field for precise time comparison as a GNSS backup.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.40-53
• /
• 2021

Research vessels(R/Vs) used for ocean research move to the planned research area and perform ocean observations suitable for the research purpose. The five research vessels of the Korea Institute of Ocean Science & Technology(KIOST) are equipped with global positioning system(GPS), water depth, weather, sea surface layer temperature and salinity measurement equipment that can be observed at all times during cruise. An information platform is required to systematically manage and utilize the data produced through such continuous observation equipment. Therefore, the data flow was defined through a series of business analysis ranging from the research vessel operation plan to observation during the operation of the research vessel, data collection, data processing, data storage, display and service. After creating a functional design for each stage of the business process, KIOST Underway Meteorological & Oceanographic Information System(KUMOS), a Web-Geographic information system (Web-GIS) based information platform, was built. Since the data produced during the cruise of the R/Vs have characteristics of temporal and spatial variability, a quality management system was developed that considered these variabilities. For the systematic management and service of data, the KUMOS integrated Database(DB) was established, and functions such as R/V tracking, data display, search and provision were implemented. The dataset provided by KUMOS consists of cruise report, raw data, Quality Control(QC) flagged data, filtered data, cruise track line data, and data report for each cruise of the R/V. The business processing procedure and system of KUMOS for each function developed through this study are expected to serve as a benchmark for domestic ocean-related institutions and universities that have research vessels capable of continuous observations during cruise.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.299-309
• /
• 2014

This paper evaluated the possibility for 1/5,000 digital topographic mapping by using PLEIADES images of 0.5m GSD(Ground Sampling Distance) resolution that has recently launched. Those results of check points by applying the initial RPC(Rational Polynomial Coefficient) of PLEIADES images came out as; RMSE of those were $X={\pm}1.806m$, $Y={\pm}2.132m$, $Z={\pm}1.973m$. Also, if we corrected geometric correction using 16 GCP(Ground Control Point)s, the results of RMSE became $X={\pm}0.104m$, $Y={\pm}0.171m$, $Z={\pm}0.036m$, and t he RMSE of check points were $X={\pm}0.357m$, $Y={\pm}0.239m$, $Z={\pm}0.188m$; which of those results indicated the accuracy of standard adjustment complied in error tolerances of the 1/5,000 scale. Additionally, we converted coordinates of points, obtained by TerraSAR. for comparing with measurements from GPS(Global Positioning System) surveying. The RMSE of comparing converted and GPS points were $X={\pm}0.818m$, $Y={\pm}0.200m$, $Z={\pm}0.265m$, which confirmed the possibility for 1/5,000 digital topographic mapping with PLEIADES images and GCPs. As method of obtaining GCPs in unaccessible area, however, the outcome evaluation of GCPs extracted from TerraSAR images was not acceptable for 1/5,000 digital topographic mapping. Therefore, we considered that further researches are needed on applicability of GCPs extracted from TerraSAR images for future alternative method.

• Korean Journal of Agricultural Science
• /
• v.51 no.3
• /
• pp.315-329
• /
• 2024

This study was conducted for simulation model development of an electric all-wheel-drive vehicle to adapt the agricultural machinery. Data measurement system was installed on a four-wheel electric driven vehicle using proximity sensor, torque-meter, global positioning system (GPS) and data acquisition (DAQ) device. Axle torque and rotational speed were measured using a torque-meter and a proximity sensor. Driving test was performed on an upland field at a speed of 7 km·h^-1. Simulation model was developed using a multi-body dynamics software, and tire properties were measured and calculated to reflect the similar road conditions. Measured and simulated data were compared to validate the developed simulation model performance, and axle rotational speed was selected as simulation input data and axle torque and power were selected as simulation output data. As a result of driving performance, an average axle rotational speed was 115 rpm for each wheel. Average axle torque and power were 4.50, 4.21, 4.04, and 3.22 Nm and 53.42, 50.56, 47.34, and 38.07 W on front left, front right, rear left, and rear right wheel, respectively. As a result of simulation driving, average axle torque and power were 4.51, 3.9, 4.16, and 3.32 Nm and 55.79, 48.11, 51.62, and 41.2 W on front left, front right, rear left, and rear right wheel, respectively. Absolute error of axle torque was calculated as 0.22, 7.36, 2.97, and 3.11% on front left, front right, rear left, rear right wheel, respectively, and absolute error of axle power was calculated as 4.44, 4.85, 9.04, and 8.22% on front left, front right, rear left, and rear right wheel, respectively. As a result of absolute error, it was shown that developed simulation model can be used for driving performance prediction of electric driven vehicle. Only straight driving was considered in this study, and various road and driving conditions would be considered in future study.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.382-391
• /
• 2019

This study was conducted to verify whether smartphone hiking apps, which generate social network data including location information, are useful tools for analyzing the use characteristics of a forest recreation area. For this purpose, the study identified the functions and service characteristics of smartphone hiking apps. Also, the use characteristics of the area of Daegwallyoung were analyzed, compared with the results of the field survey, and the applicability of hiking apps was reviewed. As a result, the service types of hiking apps were analyzed in terms of three categories: "information offering," "hiking record," and "information sharing." This study focused on an app that is one of the "hiking record" types with the greatest number of users. Analysis of the data from hiking apps and a field survey in the Daegwallyoung area showed that both hiking apps and the field survey can be used to identify the movement patterns, but hiking apps based on a global positioning system (GPS) are more efficient and objective tools for understanding the use patterns in a forest recreation area, as well as for extracting user-generated photos. Second, although it is advantageous to analyze the patterns objectively through the walking-speed data generated, field surveys and observation are needed as complements for understanding the types of activities in each space. The hiking apps are based on cellphone use and are specific to "hiking" use, so user bias can limit the usefulness of the data. It is significant that this research shows the applicability of hiking apps for analyzing the use patterns of forest recreation areas through the location-based social network data of app users who record their hiking information voluntarily.

• Journal of the Korean association of regional geographers
• /
• v.9 no.4
• /
• pp.425-436
• /
• 2003

Integrated approach is presented by developing the technology and the ways of the practical use of the integrated digital map of and Electronical Navigational Chart (ENC) and Digital Terrain Map (DTM) for the effective and scientific based conservation, development and management of coastal area in this study. At first as preliminary studies to make eventual integrated maps, the necessity of the integrated map is described with the concept of coastal areas. Then, the characteristics of digital maps developed by Korean Geography Institute and National Marine Investigation Institute are carefully analyzed and integrated to a digital map as a test for edge matching in coastal line. Developed test coastal map was overlayed with a high-resolution satellite image (KVR-1000). The ground survey using Global Positioning System was conducted for the analysis of edge matching along the coastal line. Results from the edge matching analysis of coastal lines showed about 14 meters mean difference in artificial terrain and 4 meters mean difference in natural terrain. The problems, causes and solutions for the edge-matched differences are described. Furthermore, the value of utilization, the future use and various fields of application produced by the integrated digital map database are suggested as a basis for ICZM implementation in South Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.155-160
• /
• 2018

The unmanned aerial vehicle (UAV) is used in various fields, such as land surveying, facility management, and disaster monitoring and restoration because it has low operational costs, fast data acquisition, and can generate a digital surface model (DSM). Recently, the UAV has been applied to process management in construction projects. Construction projects are widely distributed not only in urban areas but also in mountainous areas and rural areas where people are rarely in traffic or in vehicles. Projects range from a few hundred meters to several kilometers long. In order to perform a reconnaissance survey, a surveying method using a global positioning system (GPS) or a total station has mainly been used. However, these methods have a disadvantage in that a lot of time is required for data acquisition. This study's purpose is to evaluate the usability of a UAV DSM for surveying a construction area. Data was acquired using the UAV and a three-dimensional (3D) laser scanner, and the DSM of the construction site was created through data processing. The UAV DSM showed accuracy to within 30 cm based on the 3D laser scanner data, and a process comparison between the two work methods was able to present the usability of the UAV DSM in the field of construction surveying. Future utilization of the UAV DSM is expected to greatly improve the efficiency of work in construction projects.