• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.131-136
• /
• 2013

Automobile was first introduced in 1903 in South Korea, the masses of the car was carried out rapidly compared to other countries. However, many people were killed in a traffic accidents and economic loss was occurred due to the spread of the automobile. In South Korea, 2012, traffic accident occurred 223,656 times, 5,392 fatality, 344,565 injured people. In the last five years, about 224,000 accidents per year were occurring. In other words, 610 traffic accidents occur and about 15 people pass away in one day. In addition, the proportion of traffic accidents is first place in the OECD countries and it is very high in the world. Understand occurrence tendency of traffic accident, accident frequency rate of the driver who drives more than 10 years was higher than the novice driver. In addition, as a result of examining the cause of the traffic accident, breach of safe driving obligation appears highest case (125,391 times), and followed by signal violation, break safety distance. Therefore, the majority of traffic accidents occurred by the lack of safety awareness of the driver. In this study, prevent the loss of human life and property in traffic disaster, by establish disaster prevention measures that investigated by questionnaire survey and statistical data of the state of consciousness and driving posture in response to the driving history of the driver.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.39-46
• /
• 2014

A total loss of all heat sinks is considered a severe accident with a low probability of occurrence. Following a total loss of all heat sinks, the degasser/condenser relief valves (DCRV) become the sole means available for the depressurization of the primary heat transport system. If a nuclear power plant has a total loss of heat sinks accident, high-temperature steam and differential pressure between the primary heat transport system (PHTS) and the steam generator (SG) secondary side can cause a SG tube creep rupture. To protect the PHTS during a total loss of all heat sinks accident, a sufficient depressurization capability of the degasser/condenser relief valve and the SG tube integrity is very important. Therefore, an accurate estimation of the discharge through these valves is necessary to assess the impact of the PHTS overprotection and the SG tube integrity of the primary circuit. This paper describes the analysis of DCRV discharge capacity and the SG tube integrity under a total loss of all heat sink using the CATHENA code. It was found that the DCRV's discharge capacity is enough to protect the overpressure in the PHTS, and the SG tube integrity is maintained in a total loss of all heat accident.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.138-147
• /
• 2005

The accidents which occurred between during february of 1997 to December of 2004 at the 2nd Daegu subway construction site have been classified. The accident types of injuries include accidental falls, falling objects which consist 53.4% of all accidents. This result is higher than the same types of accidents occurring at construction sites which are 46.3%. It was found that the 3.4 times more accidents are caused from safety measures and working methods than problems caused by lack of supervision. 78.0% of the accidents occurred at stations and at the ventilation area. 31.9% of the accidents occurred when the operation was near completion($81.0%{\sim}100.0%$) which means there was pressure to complete the operation to meet the set due date. In the case of 50.0% of the accidents were caused by workers with less than two month work experience. And lumbago is 6.9%, especially lumbago didn't showed before. Maybe accident should increase if not reduce a possibility of danger. In this study a literature search has been conducted for the cause of these accident types and respective suggestions are provided.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.32-38
• /
• 2016

In general, lots of containers including various dangerous materials are transported to the port located in big cities such as Busan where massive residents live. Thus, it's really important how to make the emergency response for the leak accidents of dangerous materials and evaluate the direct or indirect damages to adjacent areas. In this study, in order to make reasonable emergency plans, CA (Consequence Analysis) is employed after selecting a key hazardous and noxious material, hydrogen fluroide. This material accounts for the third largest portion of cargo volume among all dangerous materials and can cause a huge damage in case of leakages. As a case study, Busan North port is selected as a test port since the portion of dangerous materials is higher than that of other ports in Busan. It is assumed that 1 ton of hydrogen fluoride is spilled at Busan North port. CA is performed to assess the impact of this accident. Throughout CA, the ERPG-2 range of a leak accident can be evaluated and this result can be used for decision making tools for mitigating the impact of a leak accident. To mitigate the damage of this accident, suitable a protective equipment and resident evacuation procedures should be prepared. Finally, this study can provide a systematic approach to make the emergency plan for reducing economical and personal losses.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2866-2874
• /
• 2000

This paper is concerned with the optimum design for external reinforcement of a nuclear reactor pressure vessel(RPV) in a severe accident. During the severe reactor accident of molten core, the temperature and the pressure in the nuclear reactor rise to a certain level depending on the initial and subsequent condition of a severs accident. The reis of the temperature and the internal pressure cause deterioration of the load carrying capacity and could cause failure of the RPV lower head. The deterioration of failure can be mitigated by the external cooling or the reinforcement of the lower head with additional structures. While the external cooling forces the temperature of an RPV to drop to the desired level, the reinforcement of the lower head can attain both the increase of the load carrying capacity and the temperature drop. The reinforcement of the lower head can be optimized to have the maximum effect on the collapse pressure and the temperature at the inner wall. Optimization results are compared to both the result without the reinforcement and the result with the designated reinforcement.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.242-248
• /
• 2011

According to a study on the accident patterns of older people in 2006 by Korea Consumer Agency (CISS), the number of accidents of the elderly at home reached 486, and the figure has increased every year. As Korea is about to enter into the aged society, it is important to investigate the factors that cause an accident in the welfare facilities for the aged and establish the barrier-free construction standards. The accident influence factors include facility environmental, physical functional, socio demographic and socio psychological factors. In terms of the verification tools, there are Facility Evaluation Index, FIM, MMSE-K and General Feature. In terms of analysis method, in addition, there are real number, percentage, t-test, ANOVA and logistic regression. In conclusion, this paper attempts to reveal correlations among the accident influence factors using the Facility Evaluation Standards (115 items in total) for facility environmental factor, FIM (3 items) for physical functional factor, MMSE-K (6 items) for socio psychological factor and questionnaire (5 items) for socio demographic factor.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.130-137
• /
• 2016

본 연구는 4개 시도에서 근무하는 구급대원을 908명을 대상으로 구급차량에서 발생한 안전사고 경험 및 횟수, 경광등 사용여부, 사고원인 손상부위, 사고당시 구급차의 속도, 사공장소 및 구급차의 사고예방을 위해 필요한 사항에 대하여 설문을 실시하였다. 본 연구의 목적은 구급차관련 사고와 관련된 구급대원, 환자, 또는 상대방 등의 안전사고와 연관이 있기에 구급대원들을 대상으로 하여 사고 당시의 환경 및 시간, 손상부위에 대하여 조사하고, 향후 구급대원 및 구급차안전 운전을 위한 기초자로 활용하고자 한다. 응답자의 29.6%의 구급대원이 사고의 경험이 있었으며, 주요 사고원인은 신호위반이 35.7%, 상대방과실이 22.2%였다. 사고당시 92.1%가 경광등을 사용하였으나 사고가 발생하였다. 주요 사고 장소는 일반도로가 68%이었으며, 교통상황은 원활한 상태가 54%였고, 사고당시 속도는 40 km/h 이하가 56.4%였다. 주요 사고 시간대는 교통량이 많지 않은 오후시간대가 38.1%였으며, 사고로 인하여 발생한 부상부위는 기타부위가 62.1% 이었으나 중증 손상을 발생시킬 수 있는 머리 목의 손상이 14.4%로 나타났다. 설문에 응답한 구급대원들이 구급차의 안전사고예방을 위하여 가장 필요한 요소로는 방어운전 24.9%로 가장 높았으며, 교통법규의 준수, 안전 운전습관을 다음으로 응답하였다. 사고위험을 느끼는 경우는 신호위반 교차로 통과 가 70.1%로 가장 높았다. 따라서, 구급차량의 응급환자 이송 시 일반차량의 양보에 대한 법적인 규정 및 탑승 구급대원의 안전을 보장할 수 있는 추가적인 보호 장치가 필요함을 강조한다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.128-135
• /
• 2022

Because construction work is conducted outdoors, construction workers are affected by harmful environmental factor. Especially, Particulate Matter (PM₁₀) is one of the harmful environmental factors with a diameter of 10㎍/m³ or less. When PM₁₀ is inhaled by human, it can cause fatal impact on the human. Contrary to the various analyses of health impact on PM₁₀, the research on the relationship between construction accidents and PM₁₀ are few. Therefore, this study aims to conduct the relative frequency analysis which find out the correlation between construction accidents and PM₁₀, and the modified PM₁₀ grade is suggested to expect accidents probability caused by PM₁₀ in the construction industry. This study is conducted by four steps. i) Establishment of the database; ii) Classification of data; iii) Analysis of the Relative Frequency of accidents in the construction industry by PM₁₀ concentration; iv) Modified PM₁₀ groups to classify the impact of PM₁₀ on accident. In terms of frequency analysis, the most accidents were occurred in the average concentration of PM₁₀ (32㎍/m³). However, we found that the relative frequency of accident was increased as the concentration of PM₁₀ increased. This means the higher PM₁₀ concentration can cause more accidents during construction. In addition, PM₁₀ concentration was divided as 6 groups by the WHO, but the modified PM₁₀ grade by the relative frequency on accident was suggested as 3 groups.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.814-826
• /
• 2023

Sensor faults in nuclear power plant instrumentation have the potential to spread negative effects from wrong signals that can cause an accident misdiagnosis by plant operators. To detect sensor faults and make accurate accident diagnoses, prior studies have developed a supervised learning-based sensor fault detection model and an accident diagnosis model with faulty sensor isolation. Even though the developed neural network models demonstrated satisfactory performance, their diagnosis performance should be reevaluated considering real-time connection. When operating in real-time, the diagnosis model is expected to indiscriminately accept fault data before receiving delayed fault information transferred from the previous fault detection model. The uncertainty of neural networks can also have a significant impact following the sensor fault features. In the present work, a pilot study was conducted to connect two models and observe actual outcomes from a real-time application with an integrated system. While the initial results showed an overall successful diagnosis, some issues were observed. To recover the diagnosis performance degradations, additive logics were applied to minimize the diagnosis failures that were not observed in the previous validations of the separate models. The results of a case study were then analyzed in terms of the real-time diagnosis outputs that plant operators would actually face in an emergency situation.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.135-141
• /
• 2015

According to the statistics, occupational fatal injuries by mobile cranes were about 12 per year in whole industrial. Mobile cranes are widely used in various parts of industries to improve the efficiency of the work. However considerable number of fatal injuries happen each year during the operation of the machines. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the mobile crane showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, among the mainly five machines caused the accidents, mobile crane was higher for the second showed 0.6% for number of fatalities compared to number of mobil cranes and for the third showed 11% for number of fatalities compared to number of injuries. Second, main cause of cognitive engineering agenda was visibility, responsibility, affordance. As the measures to prevent accidents before starting operation, alternative revision for the fool proof including visibility, responsibility, affordance etc. for the fool proof measures was proposed. Third, alternative revision as cognitive accident prevention for the fail safe measures was proposed.