• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.56-61
• /
• 2001

In this work, the surface treatment of aluminum/composites (graphite-epoxy composites) was investigated. The surface of composites was treated by $Ar^{+}$ ion beam under oxygen environment. The surface of aluminum was treated by DC plasma. The optimal condition of surface treatment for the composites was determined by measuring the contact angle as a function of ion dose. The optimal treatment condition of the aluminum was determined by measuring the contact angle and T-peel strength as a function of mixture ratio of acetylene gas to nitrogen gas. The mixture ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The results showed that the contact angle of composites decreased from$ 81^{\circ}$ to $8^{\circ}$ as the ion dose increased from zero to $1$\times$10^{17}$ions/$\textrm{cm}^2$. The optimal condition of ion dose was $1$\times$10^{16}$ions/$\textrm{cm}^2$. The results also showed that the contact angle of aluminum was a minimum for the mixture ratio of 5:5. Similarly, the T-peel strength was a maximum for the mixture ratio of 5:5, which indicates that the optimal condition of mixture ratio of acetylene gas to nitrogen gas is 5:5.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.2
• /
• pp.25-33
• /
• 2012

A genetic algorithm (GA) has been employed to optimize the major design variables of the liquid rocket engine. Pressure of the main combustion chamber, nozzle expansion ratio and O/F ratio have been selected as design variables. The target engine has the open gas generator cycle using the LO2/RP-1 propellant. The gas properties of the combustion chamber have been obtained from CEA2 and the mass has been estimated using reference data. The objective function has been set as multi-objective function with the specific impulse and thrust to weight ratio using the weight method. The result shows about 4% improvement of the specific impulse and 23% increase of the thrust to weight ratio. The Pareto frontier line has been also obtained for various thrust requirements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1332-1338
• /
• 1997

In the case of the transfer function for the secondary path is dependent on time, the on-line method which can model it is continuously must be applied to the active noise control technique. And the adaptive random noise technique among the on-line methods is effective in the narrow-band control. In this method, the signal to noise ratio between random noise for modeling and primary noise is low. Therefore, the estimations of transfer function will be prone to inaccuracies and the convergence time will be too long. Such imperfections will have an influence upon the performance of an active noise controller. In this study, t enhance the signal to noise ratio, the on-line method that is combined the conventional adaptive random noise technique and the adaptive line enhancer, is proposed. By using proposed on-line method, a rigorous system identification and control of primary noise have been implemented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.127-134
• /
• 2011

A genetic algorithm (GA) has been employed to optimize the major design variables of the liquid rocket engine. Pressure of the main combustion chamber, nozzle expansion ratio and O/F ratio have been selected as design variables. The target engine has the open gas generator cycle using the LO2/RP-1 propellant. The gas properties of the combustion chamber have been obtained from CEA2 and the mass has been estimated using reference data. The objective function has been set as multi-objective function with the specific impulse and thrust to weight ratio using the weight method. The result shows about 4% improvement of the specific impulse and 23% increase of the thrust to weight ratio. The Pareto frontier line has been also obtained for various thrust requirements.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.248-255
• /
• 2003

This paper presents a fingerprint recognition algorithm using cross-correlation function. This algorithm consists of minutiae extraction, minutiae alignment and minutiae matching, where we propose a new minutiae alignment method. In our alignment method, the rotation angle between two fingerprints is obtained by using cross-correlation function of the minutia directions, thereafter the displacement is obtained from the rotated fingerprint. This alignment method is capable of finding rotation angle and displacement of two fingerprints without resorting to exhaustive search. Our fingerprint recognition algorithm has been tested on fingerprint images captured with inkless scanner. The experiment results show that 17.299% false rejection ratio(FRR) at 2.086% false acceptance ratio(FAR).

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.41-49
• /
• 2018

In this study, the theoretical dynamic characteristics of a thin-walled composite beam with a single-cell of chordwise asymmetric cross-section was studied. Mathematical modeling was done by considering the transverse shear effects, the warping restraint effects, the constant taper ratio in the longitudinal direction of the beam, and the geometrical cross-section ratio. The mass coefficients, stiffness coefficients, and Eigen frequencies of the selected section were investigated. In particular, the effects of the taper ratio and cross-section ratio of the model on the Eigen frequencies were analyzed and compared when the asymmetry of the section was considered and the warping function was not corrected.

• The Korean Journal of Applied Statistics
• /
• v.26 no.1
• /
• pp.141-149
• /
• 2013

We present methods for studying the log-density ratio that enables the selection of the predictors and the form to be included in the logistic regression model. Under bivariate normal distributional assumptions, we investigate the form of the log-density ratio as a function of two predictors. If two covariance matrices are equal, then the crossproduct and quadratic terms are not needed. If the variables are uncorrelated, we do not need the crossproduct terms, but we still need the linear and quadratic terms. We also explore other conditions in which the crossproduct and quadratic terms are not needed in the logistic regression model.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.114-121
• /
• 2008

Within 2 to 5 months after stroke, patients recover variable degrees of function, depending on the initial deficit. An impaired hand function is one of the most serious disability in chronic stroke patients. Therefore, to evaluate the extent of motor dysfunction in the hemiplegic hand is important in stroke rehabilitation. In this paper, motor recoveries in 8 chronic stroke patients with Fugl-Meyer (FM) and white matter changes before and after the training program with a designed bilateral symmetrical arm trainer (BSAT) system were examined. The training was performed at 1 hr/day, 5 days/week during 6weeks. In all patients, FM was significantly improved after the 6-week training. Diffusion tensor imaging (DTI) results showed that tractional anisotropy ratio (FAR) and fiber tracking ratio (FTR) in the posterior internal capsule were significantly increased after the training. It seemed that the cortical reorganization was induced by the 6 week training with the BSAT. In all parameters proposed this study, a significant correlation was found between these parameters (FAR and FTR) and motor recoveries. This study demonstrated that DTI technique could be useful in predicting motor recovery in chronic hemiparetic patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.959-967
• /
• 2005

The color of apparels has the interaction of the face skin colors of the wearers. This study was carried out to classify the face skin colors of Korean males into several similar face skin colors in order to extract favorable colors which flatter to their face skin colors. The criterion that select the new subjects who have the classified face skin colors have to be decided. With color spectrometer, JX-777, face skin colors of subjects were measured quantitatively and classified into three clusters that had similar hue, value and chroma with Munsell Color System. Sample size was 418 Korean males and other 15 of new males subjects. Data were analyzed by K-means cluster analysis, ANOVA, Duncan multiple range test, Stepwise discriminant analysis using SPSS Win. 12. Findings were as follows: 1. 418 subjects who have YR colors were clustered into 3 kinds of face skin color groups. 2. Discriminant variables of face skin colors was 4 variables : L value of forehead, v value of cheek, c value of forehead, and b value of cheek from standardized canonical discriminant function coefficient 1 and c value of forehead, L value of forehead, b value of cheek. and L value of cheek from standardized canonical discriminant function coefficient 2. 3. Hit ratio of type 1 was $92.3\%$, of type 2 was $96.5\%$ and of type 3 was $92.6\%$ by the canonical discriminant function of 4 variables. 4. The canonical discriminant function equation 1 and 2 were calculated with the unstandardized canonical discriminant function coefficient and constant, the cutting score, and range of the score were computed. 5. The criterion that select the new subjects who have the classified face skin colors was decided.

• The Journal of Pediatrics of Korean Medicine
• /
• v.19 no.2
• /
• pp.243-253
• /
• 2005

Objective : In this study we aimed to· investigate the parental recognition on Herbal Medication. The result showed that parents concerned about the effect of Herbal Medication on liver function and gaining weight. Therefore, we had a retrospective study on the effect of Herbal Medicaion on liver function and gaining weight. Method : In parent's recognition study, we surveyed 354 parents of children who make a first visit to Department of Oriental Pediatrics in ${\bigcirc}{\bigcirc}$ Medical Center from 3 October to 2 November 2005. In retrospective study, we examined medical record of 22 children who visited to Department of Oriental Pediatrics in Kyunghee Medical Center from 30 September 2005 to 1 January 2005. Height, weight, BMI, body fat mass, body fat ratio, AST and ALT were estimated at two points; before and after Herbal Medicaion treatment. Result: The mean of expectation of parents on the efficacy of Herbal Medication was 75.14 on the VAS scale, which was interpreted as significantly high. The result showed the effect of Herbal Medicaion on liver function(48%) and gaining weight(53%) took the largest portion. When we observe the effect of Herbal Medication on Liver function, after Herbal Medication treatment we have slightly increased AST and slightly decreased ALT, but they were not statistically significant. Also we observe the effect of Herbal Medication on getting obesity after Herbal Medication treatment. The result showed that we have slightly decreased BMI, body fat mass, body fat ratio, but they were not statistical1y significant. Conclusion : Our report shows parents of children have high expectation and stand favorable on the efficacy of the Herbal Medication. We found that parents concerned the most about the effect of Herbal Medicaion on liver function and gaining weight. Our retrospective study showed that Herbal Medicaion treatment on children has relationship with neither liver function nor the degree of obesity.