• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.115-122
• /
• 1992

Sandwich구조는 복합구조의 특별한 hybrid구조의 형태로써 두 층의 얇은 표면재와 가운데 두꺼운 층인 경량의 심재로 구성되어 있으며, 이는 표면재와 심재가 접착된 일체로써 서로의 단점을 보완하면서 구조 효율을 높인 형상이다. 또한 심재는 표면재에 비해서 상당히 두꺼운 두께를 갖기 때문에 전단 변형이 중요하므로 굽힘 강성도(bending stiffness) 계산에 전단효과가 고려되어야 한다. 구조 설계에서 중요한 목적은 중량 감소에 있기 때문에 본 논문에서는 sandwich panel의 설계시 표면재와 심재의 두께 및 재질을 변화시켜 제한조건에 맞는 최소 중량을 얻는 데 중점을 두었다. 본 해석에서 sandwich panel의 최소중량을 얻기 위하여 표면재와 전단력을 고려한 심재의 변형에 따른 변형에너지를 각각 계산한 후, 최소 potential 에너지 원리를 적용하여 목적함수의 최적치를 구하였다. 설계 제한조건으로는 허용 처짐, 허용 굽힘응력, 허용 전단응력과 국부적인 불안정 상태의 wrinkling 응력이 고려되었으며, 설계 모델은 수직 분포 하중에 의한 여러가지 경계조건에 따른 sandwich panel을 대상으로 하였다. 비선형 최적화 기법은 Nelder and Mead Simplex Search Method와 Hooke and Jeeves Pattern Search method에 External Penalty Function이 적용된 SUMT방법을 결합시킨 SUMTNM와 SUMTHJ를 사용하였으며, 해석 결과는 sandwich panel의 구조 설계에 활용할 수 있도록 표를 작성하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4072-4083
• /
• 2022

Ultrasonic impact treatment (UIT) is carried out on the Ni-based alloy stainless steel pipe gas tungsten arc welding (GTAW) girth weld, the differences of microstructure, microhardness and shear strength distribution of the joint before and after ultrasonic shock are studied by microhardness test and shear punch test. The results show that after UIT, the plastic deformation layer is formed on the outside surface of the Ni-based alloy overlayer, single-phase austenite and γ type precipitates are formed in the overlayer, and a large number of columnar crystals are formed on the bottom side of the overlayer. The average microhardness of the overlayer increased from 221 H V to 254 H V by 14.9%, the shear strength increased from 696 MPa to 882 MPa with an increase of 26.7% and the transverse average residual stress decreased from 102.71 MPa (tensile stress) to -18.33 MPa (compressive stress), the longitudinal average residual stress decreased from 114.87 MPa (tensile stress) to -84.64 MPa (compressive stress). The fracture surface has been appeared obvious shear lip marks and a few dimples. The element migrates at the fusion boundary between the Ni-based alloy overlayer and the austenitic stainless steel joint, which is leaded to form a local martensite zone and appear hot cracks. The welded joint is cooled by FA solidification mode, which is forming a large number of late and skeleton ferrite phase with an average microhardness of 190 H V and no obvious change in shear strength. The base metal is all austenitic phase with an average microhardness of 206 H V and shear strength of 696 MPa.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.203-212
• /
• 2010

In this paper, we present an analytical model for the first eigen energy level ($E_0$) of the carriers in the inversion layer in present generation MOSFETs, having ultrathin gate oxides and high substrate doping concentrations. Commonly used approaches to evaluate $E_0$ make either or both of the following two assumptions: one is that the barrier height at the oxide-semiconductor interface is infinite (with the consequence that the wave function at this interface is forced to zero), while the other is the triangular potential well approximation within the semiconductor (resulting in a constant electric field throughout the semiconductor, equal to the surface electric field). Obviously, both these assumptions are wrong, however, in order to correctly account for these two effects, one needs to solve Schrodinger and Poisson equations simultaneously, with the approach turning numerical and computationally intensive. In this work, we have derived a closed-form analytical expression for $E_0$, with due considerations for both the assumptions mentioned above. In order to account for the finite barrier height at the oxide-semiconductor interface, we have used the asymptotic approximations of the Airy function integrals to find the wave functions at the oxide and the semiconductor. Then, by applying the boundary condition at the oxide-semiconductor interface, we developed the model for $E_0$. With regard to the second assumption, we proposed the inclusion of a fitting parameter in the wellknown effective electric field model. The results matched very well with those obtained from Li's model. Another unique contribution of this work is to explicitly account for the finite oxide-semiconductor barrier height, which none of the reported works considered.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.671-680
• /
• 2007

본 연구의 최종 목적은 유체가 빠른 속도로 가해지는 물체의 경계면에서 흡입(suction) 혹은 방출(injection)을 통해 유체를 제어함으로 드래그(drag)를 감소하고자 하는 것이다. 그러나 유체는 대용량, 비선형성을 가지고 있어서 직접적인 해석은 물론, 최적화를 적용한다는 것은 매우 어려운 일이다. 이를 위해 우리는 새로운 알고리즘과 기법들을 개발하였다. 본 연구에서는 이 기법들에 대한 검증을 하고, 나아가 최적화 기법을 사용하여 드래그를 감소하기 위해 흡입량과 방출량을 구하였다. 그리고 이 흡입과 방출을 가할 수 있는 구멍의 수와 위치에 따른 변화를 알아보았다. 본 연구에서 개발된 알고리즘과 기법들을 사용하였을 경우, 기존에는 해결 할 수도 없었던 문제를 가능하게 만들었으며, 기존에 저자가 1차로 개발한 바 있는 방법에 비해서도 더욱 효과적이라는 것을 입증하였다. 그리고 드래그 감소라는 차원에서 본다면 흡입과 방출을 가할 수 있는 구멍의 숫자가 많을수록 효과가 높으나 그다지 많은 수를 필요로 하지 않는다는 것을 알게 되었으며, 구멍의 위치는 유체의 경계층이 분리되는 약간 아래가 가장 최적의 위치라는 것을 알게 되었다.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.365-380
• /
• 2020

The focus of this paper is to develop an analytical approach based on an efficient shear deformation theory with stretching effect for bending stress analysis of cross-ply laminated composite plates subjected to transverse parabolic load and line load by using a new kinematic model, in which the axial displacements involve an undetermined integral component in order to reduce the number of unknowns and a sinusoidal function in terms of the thickness coordinate to include the effect of transverse shear deformation. The present theory contains only five unknowns and satisfies the zero shear stress conditions on the top and bottom surfaces of the plate without using any shear correction factors. The governing differential equations and its boundary conditions are derived by employing the static version of principle of virtual work. Closed-form solutions for simply supported cross-ply laminated plates are obtained applying Navier's solution technique, and the numerical case studies are compared with the theoretical results to verify the utility of the proposed model. Lastly, it can be seen that the present outlined theory is more accurate and useful than some higher-order shear deformation theories developed previously to study the static flexure of laminated composite plates.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.392-398
• /
• 2013

A two-pass differential speed rolling(DSR) was applied to a deoxidized low-phosphorous copper alloy sheet in order to form a homogeneous microstructure. Copper alloy with a thickness of 3 mm was rolled to 75 % reduction by two-pass rolling at $150^{\circ}C$ without lubrication at a differential speed ratio of 2.0:1. In order to introduce uniform shear strain into the copper alloy sheet, the second rolling was performed after turning the sample by $180^{\circ}$ on the transverse direction axis. Conventional rolling(CR), in which the rotating speeds of the upper roll and lower roll are identical to each other, was also performed by two-pass rolling under a total rolling reduction of 75 %, for comparison. The shear strain introduced by the conventional rolling showed positive values at positions of the upper roll side and negative values at positions of the lower roll side. However, samples processed by the DSR showed zero or positive values at all positions. {100}//ND texture was primarily developed near the surface and center of thickness for the CR, while {110}//ND texture was primarily developed for the DSR. The difference in misorientation distribution of grain boundary between the upper roll side surface and center regions was very small in the CR, while it was large in the DSR. The grain size was smallest in the upper roll side region for both the CR and the DSR. The hardness showed homogeneous distribution in the thickness direction in both CR and DSR. The average hardness was larger in CR than in DSR.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.315-323
• /
• 2021

The air-cooled proton exchange membrane fuel cells (PEMFC) stacks, which is widely used in small-sized PEMFC, have a problem in that durability is weaker than that of the water-cooled type. Because the cathode is open to the atmosphere and the structural problem of the air-cooled stack, which is difficult to maintain airtightness, is highly likely to form a hydrogen/air boundary during start-up/shut-down (SU/SD). Through the accelerated durability evaluation of the 20 W air-cooled PEMFC stack, the purpose of this study was to find out the cause of the degradation of the stack and to contribute to the improvement of the durability of the air-cooled PEMFC stack. In this study, it was possible to evaluate durability in a relatively short time by reducing 20-30% of initial performance by repeating SU/SD 1,000 to 1,200 times on an air-cooled PEMFC stack. After disassembling the stack, each cell was divided into two and the performance analysis showed that the electrode degradation was more severe in the anode outlet membrane electrode assembly (MEA), which facilitates air inflow as a whole, than in the inlet MEA. It was shown that the cathode Pt was dissolved/precipitated to deteriorate the polymer ionomer inside the membrane.

• 복식
• /
• 제60권10호
• /
• pp.133-145
• /
• 2010

The study used four basic formats classified based on the four principles on costumes discussed in the paper 'Human Beings and Arts Phenomena' by Oskar Schlemmer who studied the relationships between stage space and the human body as an analysis tool with regard to analyses on the abstraction of human body in contemporary dance costume. Abstraction of human body expressed in costume for contemporary dance is as follows: Expansions caused by unclear boundary between spaces and costumes, and the principles of three-dimensional abstract spaces based on a geometric cube change heads, trunks, arms and legs to achieve expansions. Similar mechanical shape is a type of shape made in a succession of functional principles of human body in relationships with spaces. As mechanical mechanism is added to the geometric transformation of a specific part of human body, mechanicalness is contained in it. Motion organisms are geometric simplification of moving traces in a space based on conversion into mechanical organisms based on principles of motion, and as mechanical rotation, consecutive speed caused by refraction and directionality are suggested, mobility is achieved. Immaterial shape is based on change into a metaphysical form, and it is converted into animals, plants or a third life that symbolize body parts. It has metaphysical significance in each body part and extends sensibility. As a result of the study, development into abstract succession and a techno art mode has been confirmed. Combination of geometric cubic figures with the organic human body and configuration of the human body pursued by Oskar Schlemmer's geometric abstraction through the proactive accommodation of mechanical aesthetics has been succeeded and expressed in the contemporary dance costumes.

• Advances in nano research
• /
• 제15권5호
• /
• pp.401-410
• /
• 2023

Vibration investigation of fluid-filled three layered cylindrical shells is studied here. A cylindrical shell is immersed in a fluid which is a non-viscous one. Shell motion equations are framed first order shell theory due to Love. These equations are partial differential equations which are usually solved by approximate technique. Robust and efficient techniques are favored to get precise results. Employment of the wave propagation approach procedure gives birth to the shell frequency equation. Use of acoustic wave equation is done to incorporate the sound pressure produced in a fluid. Hankel's functions of second kind designate the fluid influence. Mathematically the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. It is also exhibited that the effect of frequencies is investigated by varying the different layers with constituent material. The coupled frequencies changes with these layers according to the material formation of fluid-filled FG-CSs. Throughout the computation, it is observed that the frequency behavior for the boundary conditions follow as; clamped-clamped (C-C), simply supported-simply supported (SS-SS) frequency curves are higher than that of clamped-simply (C-S) curves. Expressions for modal displacement functions, the three unknown functions are supposed in such way that the axial, circumferential and time variables are separated by the product method. Computer software MATLAB codes are used to solve the frequency equation for extracting vibrations of fluid-filled.