• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.647-660
• /
• 1995

Given the tetrahedron-based octree approximation of a solid as described in part(I) of this thesis, in this part(II) a systematic procedure of 'boundary moving' is developed for the fully automatic generation of 3D finite element meshes. The algorithm moves some vertices of the octants near the boundary onto the exact surface of a solid without transforming the topology of octree leaf elements. As a result, the inner octree leaf elements can be used as exact tetrahedral finite element meshes. In addition, as a quality measure of a tetrahedral element, 'shape value' is propopsed and used for the generation of better finite elements during the boundary moving process.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.37-43
• /
• 2006

In this paper, an approach to adaptive finite element analysis of three-dimensional forging processes is presented with emphasis on remeshing. In the approach, an optimal tetrahedral element generation technique is employed and the mesh density is specified by the combination of the weighted normalized effective strain and the normalized effective strain rate as well as the weighted normalized curvature. The approach is applied to computer simulation of an enclosed die forging process of a bevel gear and its results are compared with its related experiments. It has been shown that the analyzed results are in good agreement with the experimental ones.

• 대한전기학회논문지
• /
• 제39권9호
• /
• pp.921-927
• /
• 1990

This paper presents a mesh refinement scheme for 3-D adaptive finite element method. Firstly, the refinement of triangular meshes based on the bisection of triangles is discussed. And a new method to refine tetrahedral meshes employing the bisection method is presented. In two dimensional cases, it has been noted that all angles in the triangular meshes refined by the bisection method are greater than or equal to half the smallest angle in the original meshes. Through the examples where the newly proposed method is applied to three dimensional cases, it is shown that regarding the solid angles, the method gives nearly the same result as that in the two dimensional case. Accordingly, it can be concluded that the proposed method will be useful in the mesh refinements for 3-D adaptive finite element method.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.138-147
• /
• 2006

A systematic approach to tetrahedral element or mesh generation, based on an advancing-front method and an optimal triangular mesh generation technique on the surface, is presented in this paper. The possible internal nodes are obtained by the octree-decomposition scheme. The initial tetrahedral mesh system is constructed by the advancing-front method and then it is improved by the quality improvement processes including mesh swapping and nodal smoothing. The approach is evaluated by investigating the normalized length, the normalized volume, the dihedral angle and the normalized quality

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.91-99
• /
• 2004

An unstructured tetrahedral mesh generation algorithm has been presented. In order to construct better meshes in interior region by using an advancing front technique, a connecting operator and a local finishing operator II have been developed in addition to the existing operators. Before applying digging operators that generate new nodes inside of a meshing region, a connecting operator is employed that uses existing nodes which satisfy certain conditions for producing well-conditioned elements. The local finishing operator II is introduced to terminate the meshing process more flexibly on remaining subregions. With these new operators, tetrahedral meshing process becomes more robust and good quality of meshes are constructed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권1호
• /
• pp.57-65
• /
• 2011

In this paper, a good quality mesh generation for the finite element method is investigated for artificial hip joint simulations. In general, bad meshes with a large aspect ratio or mixed elements can give rise to excessively long computational running times and extremely high errors. Typically, hexahedral elements outperform tetrahedral elements during three-dimensional contact analysis using the finite element method. Therefore, it is essential to mesh biologic structures with hexahedral elements. Four meshing schemes for the finite element analysis of an artificial hip joint are presented and compared: (1) tetrahedral elements, (2) wedge and hexahedral elements, (3) open cubic box hexahedral elements, and (4) proposed hexahedral elements. The proposed meshing scheme is to partition a part before seeding so that we have a high quality three-dimensional mesh which consists of only hexahedral elements. The von Mises stress distributions were obtained and analyzed. We also performed mesh refinement convergence tests for all four cases.

• 한국전산구조공학회논문집
• /
• 제27권3호
• /
• pp.183-189
• /
• 2014

본 연구에서는 다면체 요소의 개발을 위하여 Wachspress 좌표계와 이동최소자승 근사를 기반으로하는 형상함수와 수치적분 방법을 제시하고 있다. 사면체 요소를 사면체 영역으로 분할하여 형상함수가 구성이 되고 이 영역을 사용한 일관성있는 수치적분이 수행되게 된다. 다면체 요소 면에서 Wachspress 좌표계를 사용하고 요소 내부에서 라플라스 방정식을 적용하여 이동최소자승 근사의 가중함수를 정의하게 된다. 본 연구에서 개발되는 다면체 요소의 형상함수와 수치적분 방법은 일반적인 유한요소와 유사한 특성을 갖게 되는데 수치 예제를 통하여 유효성을 보여주었다.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.211-218
• /
• 2002

This paper proposes an unstructured tetrahedral meshing algorithm for CAD models in the IGES format. The work presented is based on the advancing front method, which was proposed by the third author. Originally, the advancing front method uses three basic operators, namely, trimming, wedging, and digging. In this research, in addition to the basic operators, three new operators splitting, local finishing, and octahedral-are added to stabilize the meshing process. In addition, improved check processes are applied to obtain better-shaped elements. The algorithm is demonstrated and evaluated by four examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1605-1608
• /
• 2003

A unstructured tetrahedral mesh generation algorithm has been presented. To make better meshes in interior region using an advancing front technique, a connecting operator has been developed in addition to the existing operators. Before applying digging operators that generate new nodes inside of a meshing region, a connecting operator is employed that uses existing nodes which satisfy certain conditions for producing well-conditioned elements if possible. By introducing this new operator, tetrahedral meshing process becomes more robust and produces better quality of meshes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.700-705
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models have been proposed. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.