Alterations in the serum magnesium level were studied in twenty patients who had open-heart surgery during the period from August 1974 to May 1975. The patients were chosen at random. The operative procedures included repair for congenital heart diseases in fifteen patients and cardiac valve replacement for acquired valvular heart diseases in five patients. The age ranged from 8 to 46 years, with an average of 19 years. None of the patients had a history of gross neuromuscular abnormalities. Cardiopulmonary bypass was carried out using a roller pump and a disposable oxygenator. The prime solution consisted of 2 units of ACD banked blood and approximately an equal volume of non-blood additives in adults, while a relatively smaller volume was added in children. The average flow rate was 2,733 ml per minute. Blood samples for magnesium and arterial blood pH were obtained the day after admission 25 minutes after initiation of the bypass and on the morning the day after operation. Preoperative data were then compared with those obtained during the bypass and postoperatively by a paired test. During the bypass, the serum magnesium level decreased significantly from $1.425{\pm}0.029$ to $1.210{\pm}0.063mEq.$ liter (p<0.001). Also, there was a significant decrease in serum magnesium from $1.425{\pm}0.029$ preoperatively to $1.255{\pm}0.083mEq$. per liter (p<0.001). Also, there was a significant decrease in serum magnesium from $1.425{\pm}0.029$ preoperatively to $1.255{\pm}0.083mEq$. per liter postoperatively (p<0.01). The duration of bypass was less than 90 minutes in 10 patients (group A) and exceeded 90 minutes in the remaining 10 (group B). There was no statistical correlation between the groups A and B ($p{\gg}0.20$). Statistical analyses of the serum magnesium level and arterial blood pH showed no significant correlation with correlation coefficient; being -0.3485(pre-op), -0.2971(during bypass), and -0.1008(post-op), respectively. In all the patients, no gross neuromuscular abnormalities were found postoperatively. At present, the clinical significance of the serum magnesium level during and after bypass is controversial. In the near future, however, it is expected that improvements in prime solution and heart-lung machine will solve this problem.
Methods of back calculation for either design procedures or elastic moduli obtained from FWD(Falling Weight Deflectometer) tests have widely been used to predict remaining life of airfield concrete pavements. Since the variation of the elastic modulus obtained from the FWD test depends on the back calculation methods, prediction of remaining life of airfield pavement using the back calculation method has not been reliable. In addition, the FWD method only concentrates on the structural integrity of the pavement without considering functional distress. In this study, a newly developed remaining life estimation procedure is proposed. This methodology includes both structural and functional consideration and suggests models and decision criteria for each stage. In order to improve the estimation procedure on remaining life of pavement, conducted the several tests on an old airfield concrete pavement. As a result, it is concluded that the load transfer efficiency on joint is better for predicting remaining life of pavement than the elastic modulus, which is commonly used. In order to verify applicability of the newly developed estimation procedure and detailed models, investigation and analysis were conducted according to the new methodology on C-airfield pavement. Finally, it is confirmed that the efficiency of the proposed method for practical application was good enough.
Keun-Seok Seo;Wonki Bae;So-Hyun Kim;Nam-Hoon Kwon;Ji-Yeun Kim
Journal of Food Hygiene and Safety
/
v.16
no.3
/
pp.194-199
/
2001
This study was designed to compare the effectiveness and applicability of the HApS$^{TM}$ (Hazard Analysis process System; HUKO, Seoul, Korea) based on Petrifilm$^{TM}$ (3M, St. Paul, MN, USA) with the AOAC (the Association of Official Analytical Chemists) standard total aerobic count (TAC) method and coliform count (CC) method for meat products. The comparisons were carried out using 230 meat samples collected from various retailers: 80 pork samples, 80 chicken samples, and 70 beef samples. In the comparison of the correlation coefficient (r) between conventional method and HApS$^{TM}$ method by a linear regression analysis, the correlation coefficients in total microorganism were 0.97767, 0.90712, and 0.95594 in pork, beef, and chicken samples, respectively. The correlation coefficients in coliform count were 0.82062, 0.94833, and 0.96839 in pork, beef and chicken samples, respectively. All the independent t-test on measurement values between conventional method and HApS$^{TM}$ method represented no significant differences in the means between two methods at the 0.05 of significance level($\alpha$=0.05). Based on the high correlation between HApS$^{TM}$ and the AOAC standard methods in the TAC and CC, it might be compatible to employ the HApS$^{TM}$ method to measure the microbial contamination in livestock products. HApS$^{TM}$ method was simpler and less time-consuming in sample preparation and procedures faster than the conventional method. These results suggested that the HApS$^{TM}$ method could be substitute for the conventional methods in the analysis of microbial contamination measurement in meat products.n meat products.
The purpose of this study was to explore logical thinking abilities and metacognitive characteristics by student's giftedness and grade level. Furthermore, this study sought to present the practical basis for the promotion of students' abilities in self-driven learning as well as cognition. Average-ability students(n=199), economically disadvantage gifted students(n=133), and gifted students(n=111), who were sampled by two-step sampling procedures, responded the logical thinking ability test(Cho et al, 2006) and the questionnaire asking self-perception for 'metacognitive knowledge' and 'metacognitive control' abilities(Cho & Han, 2004). As the results, average-ability students showed less logical thinking abilities(in language, mathematics, and space) than gifted students. The logical thinking abilities had affected by giftedness, grade level and these interaction. And gifted students showed higher metacognitive control abilities in planning, monitoring, priority, and strategies of learning than average-ability students. However, there were no significant differences in metacognitive knowledge and metacognitive control abilities between economically disadvantaged gifted students and gifted students.
Objectives: This study was designed to determine the levels of polybrominated diphenyl ethers (PBDEs) in breast milk and to evaluate the relations with factors affecting these levels. Methods: The congener levels of PBDE in 22 samples of breast milk were analyzed using a high resolution gas chromatograph with a high resolution mass detector. In accordance with our standard operating procedures, the recoveries of internal standards had to range between 68% and 118%. Since the distribution of PBDE concentrations is close to log-normal, the data were logarithmically transformed before analysis. Test subjects were healthy primipara and multipara mothers with a mean age of 32 (SD = 2.7) in 2006. Results: Seven PBDE congeners (BDE-28, 47, 99, 100, 153, 154, and 183) were detected and identified in all of the pooled breast milk samples, indicating widespread contamination from PBDEs in the environment in Korea. Residue levels of total PBDEs (sum PBDEs from tri- to hepta-BDE) ranged from 0.84-13.1 ng/g lipid with median and geometric mean levels of 2.6 ng/g lipid and 2.74 ng/g lipid, respectively. PBDE congeners 47, 99 and 153 markedly predominated and accounted for about 75% of the amount of the PBDE congeners analyzed. BDE-47 was the dominant congener in most samples, whereas BDE-153 was predominant in a few (n = 7/22). BDE-47 was highly correlated with total PBDEs (r = 0.987, p < 0.01). In analyses of the differences of the means of log transformed breast milk PBDE levels for groups of potential covariates, only breast milk BDE-47 and BDE-99 levels were significantly associated with fish (p < 0.05) and meat consumption (p < 0.01). However, we did not find significant correlations between PBDE levels and maternal age, body mass index (BMI), parity, job presence and smoking status. Conclusions: Our findings are mainly limited due to the small sampling size and low doses of PBDEs exposure. Background and human exposure data of PBDEs is lacking, and longitudinal investigations into the environment and biota are encouraged to determine the health impact on future populations in Korea.
Classical deterministic testing controls the execution of concurrent programs based on the equivalence between specifications and programs. However, it is not directly applicable to a situation in which synchronization sequences, being valid but infeasible, are taken into account. To resolve this problem, we had proposed automata-based deterministic testing in our previous works, where a concurrent program is executed according to one of the sequences accepted by the automaton recognizing all sequences semantically equivalent to a given sequence. In this paper, we present the automata-based testing environment for Java multi-thread programs, and we design and implement "Deterministic Executor" in the testing environment. "Deterministic Executor" transforms a Java multi-thread program by applying automata-based deterministic testing, the transformed program presents testing results. "Deterministic Executor" uses "Automata Generator", which generates an equivalent automaton of a test sequence, and "Replay Controller", which controls the execution of programs according to the sequence accepted by the automaton. By illustrating automata-based testing procedures with a gas station example, we show how the proposed approach does works in a Java multi-threaded program.roach does works in a Java multi-threaded program.
This study is to develop a fatigue scale for the private security guard for a private security guard to effectively manage fatigue were tested for validity and reliability. To achieve that, this study employed purposive sampling to draw 300 samples among private security guards working for the security firms registered in Seoul District Police Office as of 2014, and used 259 samples for final analysis. Fatigue scale was developed on the basis of the scale development methods and procedures in previous studies. For data processing, SPSSWIN 18.0 program was applied to conduct exploratory factor analysis, reliability analysis, and correlation analysis, and AMOS 18.0 program was employed to conduct confirmatory factory analysis. This study came to the following conclusion. First, the validity of the fatigue measurement tool was high. In other words, content validity was high, and construct validity was also high. The factor loading of exploratory factor analysis was .452, and the standard value of confirmatory factor analysis was .403. Therefore, the tool satisfied the basis value of fit index. The sub categories of fatigue, finally drawn from validity test, were mental fatigue, nervous system dysfunction, physical deformity, and exhaustion. Secondly, the reliability of the fatigue measurement tool was high. In other words, according to item analysis, the correlation between items and their sub categories, and between items and total score was more than .602, relatively high. And the reliability coefficient (Cronbach's ${\alpha}$) was high, or more than .658. Fatigue Scale tool will be developed by private security guards in the present study is to measure the validity and reliability verification is clearly tired of the private security guards than the tools that are used in other studies in the existing area.
The effect of fault on the stability of the closely-spaced twin tunnels located in fault zones was investigated by numerical analyses and scaled model tests on condition of varying widths, inclinations and material properties of fault. When obtaining the strength/stress ratios of pillar between twin tunnels, three different stresses were used which were measured at the middle point of pillar, calculated to whole average along the pillar section and measured at the left/right edges of pillar. Among them, the method by use of the left/right edges turned out to be the most conservative stability estimation regardless of the presence of fault and reflected the excavating procedures of tunnel in real time. It was also found that the strength/stress ratios of pillar were decreased as the widths and inclinations of fault were increased and as the material properties of fault were decreased on condition using the stresses measured at the left/right edges of pillar. As a result of scaled model tests, it was found that the model with fault showed less crack initiating pressure than the model without fault. As the width of fault was larger, tunnel stability was decreased. The fault had also a great influence on the failure behavior of tunnels, such as the model without fault showed failure cracks generated horizontally at the left/right edges of pillar and at the sidewalls of twin tunnels, whereas the model with fault showed failure cracks directionally generated at the center of pillar located in the fault zone.
Kim, Ju Hee;Myeong, Man Sik;Oh, Chang Sik;Kim, Yun Jae
Transactions of the Korean Society of Mechanical Engineers A
/
v.40
no.2
/
pp.175-183
/
2016
The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method.
We have never seen any method to cope basically with complicated situation and problems around medical reimbursement rates here in Korea since 1977 witnessed by the beginning of medical insurance. By the way researchers concerned are beginning to propose some kinds of innovative and detailed ideas to government these days. They are Diagnosis-related group(DRG) and Resource-based .elative value scale(RBRVS). In the light of this situation it is so encouraging that our government can come up with that and move. In case of RBRVS research we have already been reaching even to the level of reviewing and revising methodology for its further development after naive pilot study on internal medicine and general surgery last year. However there might be something different conditions between USA and Korea to apply the same Dr. Hsiao's method and it must be vital to check so called' total work approach' compared with 'intra-service work approach' before expanding to the whole medical fields. According to the' Intra-service approach', the physician's work is supposed to be divided into three sub-works by the name of intraservice work, pre, and post service work. These sub-works, again should be merged together to be the pre-postwork subset through some statistical methods of the estimation process applied by Dr. Hsiao's methodology in RBRVS development later on. But in this paper that estimation process was not taken because we could have real values for all of those surveyed items related to just one specialty, OB & GY. Instead, We used some statistical comparison procedures relevant to demographic characteristics, reliability & validity and correlation analysis with American RVU(Relative value unit) between the total work and merged total work from intraservice work approach. The unit of analysis was individual physicians of OB & GY and 300 physicians were selected for each approach through statistical sampling method based on national population of OB & GY physicians in Korea. And also with the thankful help of Advisory Committee under Korean Association of OB & GY, questionnaires were made and mailed to the subjects, two times. As a result there were not any statistically significant differences in demographic characteristics between the two approaches except for the variable 'Response time for the questionnaires', but in other sections of comparisons, response rate, representative values, reliability & validity test, correlation analysis with American RVU, all showed 'Total approach' was not only more rational and statistically meaningful than 'Intra-service approach' but also had considerable merits. But we are not absolutely sure about this paper's robustness. Because of some limitations, we'd rather like to suggest further researches should be followed. In that sense the first thing would be a research for the influence of doctor's characteristics, especially 'frequency' on the rating of work and the way to define total work more clearly.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.