• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.429-436
• /
• 2005

In this study, we have compared with the differences between the extent of sampling disturbance and consolidation characteristics by experiments, which are consolidation test and have been performed with Kwang-Yang clay samples. The effects on sampling disturbance to consolidation characteristics of soft clay have been inverstigated by using soil samples obtained from large block sampling and piston sampling methods. Through a few experiments, we've got important results which are that the consoilidation parameter of large block sample(Pc, Cc, Cv) is much larger than the value of parameter of piston sample. We've also found the fact that the large block sample using the large size sampler is much better than piston sample in the quality of goods to lessen the effects on disturbance of sampling. When compared to the parameter of consolidation along with the methods of experiment, we found that the result performed by large size consolidation test is the greatest one and CRS is much better than standard consolidation test to seek for proper parameter.

• 한국해안·해양공학회논문집
• /
• 제23권4호
• /
• pp.285-291
• /
• 2011

이 연구에서는 신형소파블록을 대상으로 실험 및 수치해석을 수행하여 역학적 성능을 평가하고 적절한 보강재의 배근에 따른 구조성능 향상 효과를 검토하였다. 수치해석을 통하여 신형소파블록에 인장응력이 발생하는 위치와 크기를 예측하여 보강재를 설계하였다. 보강재로는 일반 철근 및 해양환경에 적합하도록 부식과 피로에 장점을 지닌 섬유보강재(FRP)를 사용하였다. 실험을 통하여 보강재가 없는 무근 신형소파블록의 파괴하중은 350 kN으로 소파블록의 자중에 비하여 6.2배로 나타났으며, 철근이나 FRP보로 보강한 실험체는 모두 실험의 최고하중인 900 kN 이상의 강도를 보였다. 위험단면을 통과하는 보강재의 개수는 시공의 편의를 위해서는 굵은 지름의 단일 보강재를 사용하는 것이 유리하지만 가는 지름의 보강재 여러 개를 사용하여 균열 폭을 감소시키는 것이 바람직하다는 결과를 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1004-1011
• /
• 2008

In this study, obtained large block sample and piston sample of marine clay in korea were performed unconfined compression and consolidation test. Soil properties of two type samples such as failure strain, between two parameter's ratio($E_{50}$ and $q_u$), and volumetric strain were used to evaluate sample disturbance. The result, large block samples show a low disturbance than piston samples. Therefore, we suggest new sample disturbance evaluated method through the relation of OCR and volumaric strain at shallow of marine clay in Korea and suggest new sample disturbance classified method by subdivided grade for failure strain of unconfined compression test.

• 반도체디스플레이기술학회지
• /
• 제14권2호
• /
• pp.67-72
• /
• 2015

For the development of UFS device test system, M-PHY specifications should be matched with MIPI-standard which is analog signal protocol. In this paper, the implementation methodology and hardware structure for the M-PHY AFE (Analog Front End) Block was suggested that it can be implemented using universal components without ASIC process. The testing procedure has a jitter problem so to solve the problems we using ASIC process, normally but the ASIC process needs a lot of developing cost making the UFS device test system. In is paper, the suggestion was verified by the output signal which was compared to the MIPI-standard on the Prototype-board using universal components. The board was reduced the jitter on the condition of HS-TX and 5.824 Gbps Mode in SerDes (Serialize-deserializer). Finally, the suggestion and developed AFE block have a useful better than ASIC process on developing costs of the industrial UFS device test system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.283-289
• /
• 2011

Purpose: The purpose of this study was to evaluate flexural strength of full zirconia crown using block after clinical work. Methods: The three point bending test was used to measure the flexural strength of zirconia block. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. As for the analysis methods, the study used analysis of variance, Tukey's test. Results: The ave Rage value of flexural strengths of WIELAND, Zirkonzahn, Hass, D-MAX were 516.2 MPa, 612.6MPa, 566.2MPa, 744.6MPa. The ave Rage value of Surface Roughness of WIELAND, Zirkonzahn, Hass, D-MAX were 0.39Ra, 0.33Ra, 0.33Ra, 0.47Ra. Conclusion: Flexural strength of zirconia block decreased after clinical work. Flexural strength of zirconia block is equal to or higher than flexural strength of dental metal, so zirconia block can be used as dental material.

• 대한가정학회지
• /
• 제41권7호
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권2호
• /
• pp.109-118
• /
• 2008

We present a new version of the first return time test for pseudorandomness. Let $R_n$ be the first return time of initial n-block with overlapping. An algorithm to calculate the probability distribution of the first return time $R_n$ for each starting block is presented and used to test pseudorandom number generators. The standard Z-test for log $R_n$ is applied to test the pseudorandom number generators.

• 한국정보교육학회:학술대회논문집
• /
• 한국정보교육학회 2011년도 동계학술대회
• /
• pp.203-209
• /
• 2011

본 연구는 선행 연구 분석을 통해 찾아낸 정보 영재의 특성 중 하나인 알고리즘 능력을 측정하여 정보 영재를 판별할 수 있는 도구를 교육용 프로그래밍 언어인 스크래치를 활용하여 개발하였다. 판별 도구는 크게 단일 스프라이트, 다중 스프라이트로 나누고 각각 블록추가, 블록 순서 변경, 변수 값 수정, 블록 종류 변경으로 세분화하여 문항을 개발하였다. 본 연구에서 개발한 정보 영재 판별 도구는 프로그래밍 언어를 배우지 않은 학생들도 쉽게 조작할 수 있는 교육용 프로그래밍 언어 중 하나인 스크래치를 활용해 제작되었다, 그러므로 프로그래밍을 배우지 않은 일반 학생들을 대상으로 판별 도구를 이용해 알고리즘 능력을 측정하고 분석한다면 많은 학생들의 정보 영재성을 판별하는데 기여할 것으로 기대한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.287-288
• /
• 2006

Cracks on the cylinder block of diesel engines will often happen due to cyclic load and thermal stress. According to the Classification Societies' rules, welding repairs of cylinder block made of cast irons are generally not permitted. However, such welding repairs became inevitable taking enormous cost and time for their renewal into consideration. In this study repair welding methods for the cylinder blocks, made of gray cast irons were reviewed and the tests of their welds were carried out in order to purpose the repair welding methods of packing seat and o-ring seat of cylinder block and apply them to the practice. It is concluding remarks that the suspected crack by a magnetic particle test due to different magnetic permeability can be identified, which are not associated with a mechanical discontinuity.