• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1377-1381
• /
• 2003

This paper describes real time object tracking of 3D objects in 2D image sequences. The moving objects are segmented from the image sequence using morphological operations. The moving objects are segmented by the method of differential image followed by the process of morphological dilation. The moving objects are recognized and tracked using statistical moments. The direction of moving objects are determined by the Hough transform. The straight lines in the moving objects are found with the help of Hough transform. The direction of the moving object is calculated from the orientation of the straight lines in the direction of the principal axes of the moving objects. The direction of the moving object and the displacement of the object in the image sequence is used to calculate the velocity of the moving objects. The simulation results of the proposed method are promising on the test images.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.41-47
• /
• 2001

In this paper, I propose a detection algorithm that can reliably separate moving objects from noisy background in the image sequence received from a camera at the fixed position. The proposed algorithm consists of four processes: generation of the difference image between the input image and the reference image. multilevel quantization of the difference image, and multistage merging in the quantized image, detection of the moving object using a back propagation in a neural network. The test results show that the proposed algorithm can detect moving objects very effectively in noisy environment.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.5-8
• /
• 2002

The use of the co-cured joining method for composite structures is attractive due to several benefits. However, since the design stress level in cyclic loads is often smaller than the joint strength obtained from the static tensile load test, it is important to establish proper fatigue design criteria. Although some researchers have reported on co-cured joints, there are only a few papers published on the fatigue characteristics of co-cured joints. In this paper, the effect of bond parameters on the fatigue characteristics of a steel-composite co-cured double lap joint under cyclic tensile loads was experimentally investigated. We considered the surface roughness of the steel adherend and the stacking sequence of the composite adherend as bond parameters. A fatigue failure mechanism of the co-cured double lap joint was explained systematically by investigating the surfaces of failed specimens.

• The Mathematical Education
• /
• v.48 no.4
• /
• pp.455-467
• /
• 2009

During problem solving, "mathematical thought process" is a systematic sequence of thoughts triggered between logic and insight. The test questions are formulated into several areas of questioning-types which can reveal rather different result. The lower level questions are to investigate individual ability to solve multiple mathematical problems while using "mathematical thought." During problem solving, "mathematical thought process" is a systematic sequence of thoughts triggered between logic and insight. The scope of this case study is to present a desirable model in solving mathematical problems and to improve teaching methods for math teachers.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.201-204
• /
• 2005

Recently, the generation of panoramic images and high quality mosaic images from video sequences has been attempted by a variety of investigations. Among a matter of investigation, in this paper, left and right stereo mosaic image generation utilizing airborne-video sequence images is focused upon. The stereo mosaic image is generated by creating left and right mosaic image which is generated by front and rear slit having different viewing angle in consecutive video frame images. The generation of stereo mosaic image proposed in this paper consists of several processes: camera parameter estimation for each video frame image, rectification, slicing, motion parallax elimination and image mosaicking. However it is necessary to check the feasibility on generating stereo mosaic image as explained processes. Therefore, in this paper, we performed the feasibility test on generating stereo mosaic image using video frame images. In doing so, anaglyphic image for stereo mosaic images is generated and tested for feasibility check.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.122-129
• /
• 2009

Frequency is an important operating parameter of a power system. It is essential that the frequency of a power system be maintained very close to its nominal frequency. And frequency measurement devices have need to measure a fast and accurate of frequency using voltage signals. This paper proposes a comparative study of frequency estimation techniques using the high speed FIR filter based algorithm, the DFT filter based algorithm using phasor angle between two phasors, and positive sequence component based algorithm using the half angle between two successive positions of phasor. The discussed three techniques have been formed through numerical manipulation of a discrete system. The proposed techniques have been tested using signals obtained from selected power system model using ATP simulation package. Some test results are shown in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.32-39
• /
• 2006

In this paper, an iterative subspace-based calibration algorithm for a CDMA-based antenna array in the presence of unknown gain and phase error is presented. The algorithm does not depend on the array geometry and does not require a prior knowledge of the Directions Of Arrival (DOA) of the signals. The method requires the code sequence of a reference user only. The proposed algorithm is based on the subspace method and root finding approach, and it provides estimates of the calibration vector, the DOA and the channel impulse response, by using the code sequence of a reference user. The performance of the proposed algorithm was investigated by means of computer simulations and was verified using field data measured through a custom-built W-CDMA test-bed. The data show that experimental results match well with the theoretical calibration algorithm. Also, teh study propose an efficient algorithm using the simulated annealing technique. This algorithm overcomes the requirement of initial guessing in the subspace-based approach.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.925-933
• /
• 2018

In this paper, we propose a new smart ordering application system for granting the customer numbers. The proposed system assigns sequence number of customers who visit at offline store as using speaker and microphone of smart device. This system has more advantage than the existing ordering system. Because the proposed system does not need any customer information like as phone number or SNS ID, it can protect customer privacy information. In this system, we use high frequency which is inaudible to the human ear as communication signal between speaker and microphone. To confirm performance evaluation, we perform a test with ten smart devices like as iPhone 6, 7, 8, Galaxy s8 and the result shown a success rate of 98.7 percent. Therefore, the proposed system can be useful service technology at the various offline store which need to assign a sequence number for customers, because many customers visit at the store.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.78-80
• /
• 2005

The pattern recognition of automobile and parking line for the automatic car parking system was processed based on statistical method for reducing the processing time. The command of driving for parking at the vacant parking lot was transmitted from processor to motor driven actuator using direct sequence spread spectrum communication, which enables the multiple transmission in CAN(controller area network). The test-bed which has CCD camera, processor, radio transceiver and FPGA was implemented and demonstrated to be operated well.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.79-86
• /
• 2012

This study focuses on the problem of scheduling wafer lots of several recipe(operation condition) types in the photolithography workstation in a semiconductor wafer fabrication facility, and sequence-dependent recipe set up times may be required at the photolithography machines. In addition, a lot is able to be operated at a machine when the reticle(mask) corresponding to the recipe type is set up in the photolithography machine. We suggest various heuristic algorithms, in which developed recipe selection rules and lot selection rules are used to generate reasonable schedules to minimizing the total weighted flowtime. Results of computational tests on randomly generated test problems show that the suggested algorithms outperform a scheduling method used in a real manufacturing system in terms of the total weighted flowtime of the wafer lots with ready times.