• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.114-116
• /
• 2015

This paper presents a Stochastic Time-Cost Tradeoff analysis system (STCT) that identifies optimal construction methods for activities, hence reducing the project completion time and cost simultaneously. It makes use of schedule information obtained from critical path method (CPM), applies alternative construction methods data obtained from estimators to respective activities, computes an optimal set of genetic algorithm (GA) parameters, executes simulation based GA experiments, and identifies near optimal solution(s). A test case verifies the usability of STCT.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.109-110
• /
• 2015

This paper presents a computational method that identifies an exact set of optimal overlap rates between critical activities to meet job site specific needs by using rework cost-slope. The procedures to compute the exact solution are provided in peudocode algorithm. The method is coded into Exact Concurrent Construction Scheduling system that allows practitioners to make more informed decision in accordance with the site-specific condition involved in the overlapping of critical activities. Test cases verify the validity of the computational method and the usability of the system.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.102-106
• /
• 2002

The Act on Safety Management of Social Assets was established on 1995 and revised on 1999 to relieve maintenance cost of managing offices. The provision for load bearing test before opening was deleted and the number of load bearing test after opening was reduced in the Revised Act on 1999. The effect of revision is the main concern in this study. 176 technical reports on load bearing test of long span bridges are analyzed. The results show that various structural defects are inherent in recent bridges constructed since 1995. So the preservation of provisions deleted in original act is needed up to now.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.99-104
• /
• 1998

In this paper I designed test pattern generator which will be completely detected the faults of multi-stage Logic Circuit. 1 generated this pattern using the test pattern generation Logic Circuit. The generated test patterns compared with the exhausted testing was decreased pattern. This test pattern generator will detect the all single stuck-at faults in the multi-stage Logic Circuit. The choice of which of the many I.C testing methods to use can have a effect on the success or failure of the fault detected. One of the most important considerations is cost and designed test pattern generator is very low cost type.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.217-221
• /
• 2006

Multipactor-free S-band duplexer based on inter-digital cavity type filter is proposed and demonstrated by in-house mulitpactor test facility for satellite RF components. Multipactor sensitivity of designed duplexer is analyzed by checking it out the maximum field accumulated region inside duplexer and calculating the electric field intensities at each resonator using 3D EM simulation in order to restrict the minimum gap distance as 2.5 mm which handles 43.13 dBm RF input power. Multipactor threshold was finally detected at 44 dBm in experiment for pulse mode test. The developed multipactor test method is cost effective, simple structure and gives a good agreement compared with the previous high cost MP test methodologies.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.67-73
• /
• 2021

The need for precise location data is growing across numerous markets, and so is the number of affordable high-precision GPS receivers. In this paper, we validated the performance of RTAP2U, a low-cost high-precision RTK receiver that was recently released. Two positioning modes were tested: static and driving. The static test conducted Zero-Baseline Single-RTK and Network-RTK survey for 57 hours and 51 hours, respectively. For the driving test, Network-RTK survey was conducted using VRS services provided by NGII based on Trimble PIVOT and Geo++ GNSMART. The static test showed about 1 cm horizontal and vertical accuracies, which is very stable considering the test duration longer than 50 hours. The integer ambiguity FIX rate marked a solid 100%. The driving test result also reached a 100% FIX rate. Horizontal and vertical accuracies were better than 2 cm and 3 cm, respectively. Researchers can refer to this paper when considering affordable high-precision GPS receivers as an option.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.2
• /
• pp.99-106
• /
• 2002

Objective : Until now, there have been no evidence-based guidelines produced for the mass screening of hyperlipidemia cases in Korea. This study was done to find the most efficient strategy for a hyperlipidemia-screening program among Korean adults, Method : Seven alternative strategies for hyperlipidemia screening were formulated and compared ir terms of cost-effectiveness. Cost and effectiveness were estimated from social perspectives and using a two-stage screening process (initial testing and additional testing for positives from the first test). A computerized database (based on persons who had visited a health promotion center in one teaching hospital for a routine health check-up) was used to determine the cost and the outcome of various strategies. Official data was used in calculating direct and indirect costs. Effectiveness was measured according to the number of persons who needed clinical intervention for hyperlipidemia. A stratified analysis, considering age group and sex, was then done. Sensitivity analyses, focusing on several uncertain parameters, were also done. Results : Of the seven test alternatives available, the most cost-effective strategy was a screening program, which consisted of an initial test of total cholesterol, high-density lipoprotein cholesterol and triglyceride. There was some variation in the rank of the cost-effectiveness ratios for the seven alternatives dependent on age group or gender. Conclusions : Current hyperlipidemia screening practice, for National Health Insurance beneficiaries, tests only the total cholesterol level with a cut-off value of 260mg/dl as an initial screening test. It is not the best strategy for cost-effectiveness, and should be modified. Different screening strategies taking age group and sex into account should be developed and used for the efficient mass screening of hyperlipidemia cases among Korean adults.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2006

The purpose of this study and report is to provide, to the MND, an independent cost analysis of modernizing software of F-16 fighter fleets to support the use of several weapon system options, including JDAM, AIM-9X and HARM Targeting System etc. The study analyzed each options with software sizing, software cost, enabling hardware cost, flight test cost, system engineering cost, and 3 strategies. And the study proposed and analyzed some alternative strategies: strategy1 is to modernize software only within existing electronic processing capability; strategy2 is a full upgrade of weapons avionics with plug compatible electronics; strategy3 is an approach defined to mirror the USAF Common Configuration Implementation Approach (CCIP). The recommended alternative is strategy2.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.197-205
• /
• 1991

A methodology of constructions a mathematical cost model for an activity constituting ship hull assembly process is proposed. The relationship between number of workers and processing time required for an activity can be formulated using an work study method, then manhours and shop floor area-hours required are calculated accordingly. The costs for unit manhour and unit shop floor area-hour respectively are calculated by distributing the overall annual cost of the company to the overall production resources consummed during the year. A general procedure of implementing the methodology has been demonstrated through a test on an exampled activity drawn from a real process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.147-155
• /
• 2017

A new endurance test-pattern generation on NAND-flash memory is proposed to improve test cost. We mainly focus on the correlation between the data-pattern and the device error-rate during endurance testing. The novelty is the development of testing method using quasi-random pattern based on device architectures in order to increase the test efficiency during time-consuming endurance testing. It has been proven by the experiments using the commercial 32 nm NAND flash-memory. Using the proposed method, the error-rate increases up to 18.6% compared to that of the conventional method which uses pseudo-random pattern. Endurance testing time using the proposed quasi-random pattern is faster than that of using the conventional pseudo-random pattern since it is possible to reach the target error rate quickly using the proposed one. Accordingly, the proposed method provides more low-cost testing solutions compared to the previous pseudo-random testing patterns.