• Journal of Applied Reliability
• /
• v.5 no.3
• /
• pp.381-391
• /
• 2005

The level of reliability attained largely depends upon the investment in reliability growth programs during development phase. In order to find the relationship between reliability growth test time and BRTE(basic reliability tasks effectiveness) in a reliability improvement program that minimizes LCC in which contains the reliability growth cost, repair and replacement costs, and spare parts ordering costs in service with given service rate in management policy, the growth rate has been suggested proper LCC versus growth rate. This model employs the reliability growth projection with delayed fixes in avionic equipment based on AMSAA.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.609-614
• /
• 2000

This paper is an experimental study of the normal strength concrete beam and high strength concrete beam for the analysis of bending and shear behavior. In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling increase construction cost, the good ceiling system such as beam with opening give to economical merits because of a substantial reduction in materials and construction cost. For the analysis on the mechanical behavior of the reinforced high strength and normal strength concrete beams with circular opening in the web, the stress concentration of the circular opening, crack pattern and reinforcing methods were studied. Twenty test pieces with different reinforcing methods and difference concrete strength were tested and their resisting forces and load deflection curves were defined in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.207-210
• /
• 2003

As reviewing of current trend on PC connection details, owing to effective stress transfer in the connection, it grow to increase that use of mechanical splices, reinforcements or welded splices, and prestressing. However such devices as reinforcement, mechanical splices entail not only more cost resulted from materials but also extra construction process so as to cause PC used method to lower competition against conventional method. Therefore more enhanced connection details which help working process simplified and construction cost reduced. In this research, as replace 9.3mm 7strand for reinforcement, it is attempt to devise connection detail which makes workability improve and confirm effective stress transfer in the region of connection. The experimental research is proceeded by partial tension test of specimen. The splice lengths of 7strand is decided to be variations. The flexural capability is verified to depend on spice length. An an appropriate splice length could be also determined as a precedent research on improving PC connection detail.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.847-850
• /
• 2003

An Eye Ball Sensor (EBS) is a system that locates the point where the user gazes on. The conventional EBS using a CCD camera needs many peripherals, software computation causing high cost and power consumption. This paper proposes a compact EBS using smart CMOS Image Sensor (CIS) pixels. The proposed single chip EBS does not need any peripheral and operates at higher speed and lower cost than the conventional EBS. The test chip was designed and fabricated for 32$\times$32 smart CIS pixel array with a 0.35 um CMOS process occupying 5.3$\textrm{mm}^2$ silicon area.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.11-16
• /
• 2005

CAD/CAM system may have such advantages of cost reduction, production time shortening, and product quality improvement. But current advanced versions of CAD/CAM system for 3-D NC data generation are too much expensive to purchase and too difficult to make full use for small-scale manufacturers whose main products are of 2-D simple shapes. The objective of this paper is to introduce a cost-effective way to 2-D NC data generation with a widely spread CAD software. Using VISUAL LISP in the well-known AUTO-CAD, the contents and steps of an automatic NC data generation program are presented for 2-D machining of contours and pockets. To approve the usefulness of program, a test application to a real part is exhibited also.

• ETRI Journal
• /
• v.20 no.4
• /
• pp.327-345
• /
• 1998

This paper deals with the problem of one-to-one mapping of 2$^n$ task modules of a parallel program to an n-dimensional hypercube multicomputer so as to minimize the total communication cost during the execution of the task. The problem of finding an optimal mapping has been proven to be NP-complete. First we show that the mapping problem in a hypercube multicomputer can be transformed into the problem of finding a set of maximum cutsets on a given task graph using a graph modification technique. Then we propose a repeated mapping scheme, using an existing graph bipartitioning algorithm, for the effective mapping of task modules onto the processors of a hypercube multicomputer. The repeated mapping scheme is shown to be highly effective on a number of test task graphs; it increasingly outperforms the greedy and recursive mapping algorithms as the number of processors increases. Our repeated mapping scheme is shown to be very effective for regular graphs, such as hypercube-isomorphic or 'almost' isomorphic graphs and meshes; it finds optimal mappings on almost all the regular task graphs considered.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.137-140
• /
• 2008

Recently many areas require wide field of view images. Such as surveillance, virtual reality, navigation and 3D scene reconstruction. Conventional camera systems have a limited filed of view and provide partial information about the scene. however, omni directional vision system can overcome these disadvantages. Acquiring 360 degree panorama images requires expensive omni camera lens. In this study, 360 degree panorama image was tested using a low cost optical reflector which captures 360 degree panoramic views with single shot. This 360 degree panorama image system can be used with detailed positional information from GPS/INS. Through this study result, we show 360 degree panorama image is very effective tool for mobile monitoring system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.502-510
• /
• 2008

UAVs(Unmanned Aerial Vehicles) have many applications in military and commercial areas. The flight control system of UAVs is more important than manned aircraft's because the mission of UAVs must be operated without a human pilot. But very heavy and expensive navigation system makes it difficult to develop UAV flight control system. In this research, GPS/IMU integrated navigation filter was developed for light weight/low cost flight control system of small UAVs. With this navigation filter, full flight control system which has real time operating capability has been developed. The performance of the flight control system is basically checked by HILSIM (Hardware In the Loop SIMulation). Finally, the flight control system is verified by showing performance test result under real flight environment.

• Korea Journal of Hospital Management
• /
• v.12 no.1
• /
• pp.51-74
• /
• 2007

This study applied Data Envelopment Analysis to a set of Korean Public Corporation Medical Centers and Japanese Municipal Hospitals to compare their relative human resource efficiencies. Based on the data provided on the inputs and outputs, the analysis showed Japanese municipal hospitals were relatively efficient than Korean hospitals. The result of analysing BCC model shows 5 hospitals in Japan and 7 in Korea with an efficiency rating of less than 1 as considered relatively inefficient. For the inefficient hospitals the manner in which inefficient hospitals may be made efficient were indicated by the managerial strategies based on dual variables. A subsequent analysis of Wilcoxon rank-sum test revealed that the medical revenue per medical expense, labor cost per value added revenue were statistically significant between efficient and inefficient Korean hospitals and medical revenue per medical expense, labor cost per value added revenue, bed occupancy rate, average length of stay, rate of personnel expenses per medical revenue were statistically significant between efficient and inefficient Japanese hospitals.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1281-1282
• /
• 2008

Low cost TCO(Transparent Conductive oxide) thin films were prepared by 3" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify feasibility of the AZO thin films to organic light emitting device (OLED) application, test organic light emitting device was fabricated based on AZO as TCO, TPD as hole transporting layer (HTL), Alq3 as both emitting layer (EML) and electron transporting layer (ETL), and aluminium as cathode, where the both ITO and AZO surfaces were treated using $O_2$ RF plasma. The I-V characteristics of the AZO/TPD/Alq3/Al OLEDs were evaluated. As the results, the performance of the OLEDs with AZO as transparent conducting anode could be useable.