• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.123-128
• /
• 2010

The thermometers is widely used in diagnostic medical devices, and the safety and accurate performance of these devices are important in the diagnosis and monitoring of personal health. Especially, the accuracy of infra-red thermometer is highly emphasized. Here two typical thermometers are utilized for this purpose: the electronic thermometers measure body temperature by contacting to subject while infra-red thermometers measure by no contacting to subject. Therefore, the evaluating items of each thermometer are different, and the standard for each temperature is highly needed. But, there have been no international standards of each thermometer such as IEC. In this paper, we developed the standards of electronic and infra-red thermometer based on national standards such as KS, ASTM, EN, JIS and FDA guidance. The new standards focused on the safety and suitable performance for health care. This standards were applied to enact and revise the electronic medical device standards. So it can be applied to evaluate the safety and performance on technical file review. We predict that this standard will improve the quality of diagnostic medical devices (thermometers) and increase the international competitive power of domestic product.

• Mass Spectrometry Letters
• /
• 제10권1호
• /
• pp.27-31
• /
• 2019

In this article, the properties of ${CO_2}^+(CO_2)_n$ clusters in a Paul ion trap have been investigated using mass-selective instability mode which conducted by chosen precursor ions, mainly $Ar^+$ and ${CO_2}^+$ produced by a mixture of Ar and $CO_2$. Exposure of ${CO_2}^+$ ions to $CO_2$ molecules, lead to the formation of ${CO_2}^+(CO_2)_n$ clusters. Here, Ar gas react as a buffer gas and lead to form ${CO_2}^+(CO_2)_n$ cluster by collisional effect.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.326-330
• /
• 2013

The Korea Superconducting Tokamak Advanced Research (KSTAR) device is an advanced superconducting tokamak to establish scientific and technological bases for attractive fusion reactor. This device requires 3.5 Tesla of toroidal field (TF) for plasma confinement, and requires a strong poloidal flux swing to generate an inductive voltage to produce and sustain the tokamak plasma. KSTAR was originally designed to have 16 serially connected TF magnets for which the nominal current rating is 35.2 kA. KSTAR also has 7 pairs of poloidal field (PF) coils that are driven to 1 MA/sec for generation of the tokamak plasma according to the operation scenarios. The KSTAR Magnet Power Supply (MPS) was dedicated to the superconducting (SC) coil commissioning and $2^{nd}$ plasma experiment as a part of the system commissioning. This paper will describe key features of KSTAR MPS for the $2^{nd}$ plasma experiment, and will also report the engineering and commissioning results of the magnet power supplies.

• Journal of Applied and Pure Mathematics
• /
• 제5권5_6호
• /
• pp.389-406
• /
• 2023

In the pursuit of enhancing image fusion techniques, this research presents a novel approach for fusing multimodal images, specifically infrared (IR) and visible (VIS) images, utilizing a combination of partial differential equations (PDE) and discrete cosine transformation (DCT). The proposed method seeks to leverage the thermal and structural information provided by IR imaging and the fine-grained details offered by VIS imaging create composite images that are superior in quality and informativeness. Through a meticulous fusion process, which involves PDE-guided fusion, DCT component selection, and weighted combination, the methodology aims to strike a balance that optimally preserves essential features and minimizes artifacts. Rigorous evaluations, both objective and subjective, are conducted to validate the effectiveness of the approach. This research contributes to the ongoing advancement of multimodal image fusion, addressing applications in fields like medical imaging, surveillance, and remote sensing, where the marriage of IR and VIS data is of paramount importance.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.381-391
• /
• 2022

Two-photon-polymerization additive-manufacturing systems feature high resolution and precision. However, there are few reports on specific methods and possible problems concerning the use of small lasers to independently build such platforms. In this paper, a femtosecond-laser two-photon-polymerization additive-manufacturing system containing an optical unit, control unit, monitoring unit, and testing unit is built using a miniature femtosecond laser, with a detailed building process and corresponding control software that is developed independently. This system has integrated functions of light-spot detection, interface searching, micro-/nanomanufacturing, and performance testing. In addition, possible problems in the processes of platform establishment, resin preparation, and actual polymerization for two-photon-polymerization additive manufacturing are explained specifically, and the causes of these problems analyzed. Moreover, the impacts of different power levels and scanning speeds on the degree of polymerization are compared, and the influence of the magnification of the object lens on the linewidth is analyzed in detail. A qualitative analysis model is established, and the concepts of the threshold broadening and focus narrowing effects are proposed, with their influences and cooperative relation discussed. Besides, a linear structure with micrometer accuracy is manufactured at the millimeter scale.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.620-625
• /
• 2012

The sol-gel method has been widely used to synthesize the $TiO_2$ for dye sensitized solar cells and has advantages of easily fabrication process, controlling the $TiO_2$ phase and getting transparent thin-film composed of the $TiO_2$. In this paper, we synthesized the crystalline $TiO_2$ by sol-gel method controlled by the quantity ratio of Nitric acid and Ammonium hydroxide additives. The best efficiency result was obtained by 0.05 M Ammonium hydroxide and that results of Voc, Jsc, FF, and efficiency were 0.68 V, 3.28 mA/$cm_2$, 58.14 and 5.21%, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1373-1375
• /
• 2009

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.134-137
• /
• 2010

We have proposed a transflective liquid crystal display (LCD) driven by the fringe field using a liquid crystal (LC) with a negative dielectric anisotropy. The device used different twist angles of the liquid crystals (LC) in the transmissive (T) and the reflective (R) regions when voltage is applied. With the optimization of the pixel electrode width and the distance between them, the LC directors in the R- and T-regions can be rotated by about $22.5^{\circ}$ and $45^{\circ}$ on an average, respectively. As a result, a high image quality transflective LCD with a single gap, a single gamma, and a wide viewing angle characteristics in both the R- and T- regions can be realized.

• 폴리머
• /
• 제38권3호
• /
• pp.364-370
• /
• 2014

망막색소상피(RPE)는 건강한 망막을 유지하는데 중요한 역할을 하고 RPE의 퇴화는 많은 망막질병을 유발한다. RPE 이식은 최근 망막 퇴화에 대한 가능성 있는 치료법으로 제시되고 있다. RPE 세포를 안전하게 이식하기 위해서는 지지체가 필요하므로 독특한 기계적 성질과 생체적합성을 갖는 실크를 사용하여 필름을 제조하였다. 실크필름의 FTIR, 접촉각 및 생분해성을 측정한 후, RPE 세포를 실크필름에 파종하여 그 영향을 확인하였다. MTT 분석, SEM, 면역형광염색, RT-PCR을 통해 세포의 부착, 생존도, 형태유지, 특이적 mRNA의 발현을 분석하였다. 본 연구에서는, 실크필름에 배양한 RPE 세포의 부착, 증식 및 표현형 유지가 뛰어남을 확인함으로써 실크필름의 망막 재생을 위한 조직 공학적 지지체로의 응용 가능성을 제시했다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.672-674
• /
• 2006

첨단 정보통신 기술이 발전과 더불어 관광객이 이용하는 모바일서비스 패턴은 매우 다양하게 변화되고 있으며, 향후 그 패턴이 모바일시장에서의 변화를 예측 가능하게 한다. 제주 지역은 연간 500만명이 방문하는 국내 최대의 관광지이다. 본 연구에서는 제주 최대의 산업인 관광산업과 연계한 모바일 서비스 시장에 대한 현장 분석을 통하여 위치기반과 연계한 다양한 모바일 융합기술이 필요하다는 결론을 도출하였다.