• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.373-401
• /
• 2015

The UAV(Unmanned Aerial Vehicle, Drone) technology has been undergoing rapid progress, accompanied with a growth in the market. However, domestic industry standards and technology lag behind such progress happening on the international scene, and in particular in developed countries. Related regulations are also deemed lacking to address the issues that arise with such developments. Meanwhile, as the rise of UAV technology is a fairly recent phenomenon, the gap between Korea and developed countries is not too big. As this technology has high relevance to information and communication technologies, it also offers ample leeway for Korea to catch up in the field of UAV. As such, this paper seeks to provide a survey of the overall technology, market and regulations concerning UAV to identify possible measures on how to address any issues that may arise through proper policies. Due to the progress made in the field of UAV technology and increased penetration rate, striking a right balance between putting in place a proper regulatory system and establishing policies that foster growth in the field has risen as a very important issue. While the importance of establishing a legal system that helps prevent possible risks is indeed important, it must also be acknowledged that excessive regulation can also hinder technological progress. This, in turn would stagnate the market and dampen the entrepreneurial spirit in the society. In the case of new, practical technologies such as UAV, a prompt establishment of regulatory systems and policy measures in terms of policies is a requisite. In brief, in order to promote progress in the UAV industry and at the same time, for public safety and the protection of privacy, there should be an appropriate level on the easing and tightening of the regulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.625-633
• /
• 2020

this study, an expert AHP questionnaire analysis of public and private groups was conducted to take into consideration the requirements for realistic disaster services. Considered are public areas that manage disasters like fires and earthquakes that can be a major threat to national safety, as well as private areas that mainly develop disaster-related technologies. In the questionnaire, the public respondents valued accurate disaster situation information (ranked 4th and 6th) for citizens (1st), managers (3rd), and related organizations (2nd); the private sector highly valued the importance of three-dimensional (3D) control (ranked 1st, 3rd, and 5th) using future technologies. This study suggests the realization of a disaster-response service that meets the needs of public safety and technological innovation based on a 3D safety state information platform. We anticipate that this study will provide useful data for applying technology and for establishing detailed scenarios during the test bed and commercialization phases. We also expect that further studies will be conducted, such as the practical application and operation of realistic disaster response services, on the financial resources for the proliferation of local governments, and on policy support measures.

• Geophysics and Geophysical Exploration
• /
• v.23 no.2
• /
• pp.97-114
• /
• 2020

Recently, many studies have been actively conducted on the application of machine learning in all branches of science and engineering. Studies applying machine learning are also rapidly increasing in all sectors of seismic exploration, including interpretation, processing, and acquisition. Among them, fault detection is a critical technology in seismic interpretation and also the most suitable area for applying machine learning. In this study, we introduced various machine learning techniques, described techniques suitable for fault detection, and discussed the reasons for their suitability. We collected papers published in renowned international journals and abstracts presented at international conferences, summarized the current status of the research by year and field, and intensively analyzed studies on fault detection using machine learning. Based on the type of input data and machine learning model, fault detection techniques were divided into seismic attribute-, image-, and raw data-based technologies; their pros and cons were also discussed.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.4
• /
• pp.693-718
• /
• 2015

This paper examines the presence of network structures among convergence technologies focusing on national R&D projects performed by GRIs(Government-sponsored Research Institutes) in Korea. The dataset of convergence technology projects, which were conducted by 24 GRIs over 3 years (2011-2013), are analysed using the network analysis method. In this paper, a convergence technology project is defined as a project that consists of 2 or more then 2 technologies according to the intermediate classification of National Standard Classification of S&T. The research results confirm that convergence researches of government-sponsored research institutes are performed more actively than the entire convergence researches of national R&D projects. Furthermore, technological fields of GRIs' convergence projects are found to be much more varied. This paper also shows that in-house researches are more active than collaborative ones with external organizations. According to the network centrality analysis, it is identified that the network central characteristics of convergence technologies can be classified into internally oriented technologies and externally oriented technologies. Convergence technologies do not just mean simple mixture of different technologies. Therefore Korean government-sponsored research institutes should make more efforts to create convergence research areas which could generate new technologies and industries more effectively than simple multidisciplinary technology researches. From this perspective, some policy suggestions can be derived on the role of government-sponsored research institutes for activating convergence researches through the analysis of status of convergence researches and networks of institutions.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.19-29
• /
• 2021

Although several industrial revolutions and technological developments have provided time for modern people, more than 75% of modern people are currently suffering from the problem of "lack of time". Therefore, in this paper, it was judged that it was necessary to improve the mobile APP service for efficient time management of modern people, and a study was conducted on the development of usability evaluation tools. First, the current status was analyzed through case studies of six time management apps with different purposes, and then usability studies were conducted to establish a total of five evaluation principles with operability, cognition, user suitability, minimization of work errors, and sharing. Based on this, a draft of the time management mobile app usability evaluation item was prepared, and a total of 44 usability evaluation tool items were derived through three Delphi surveys of design experts over 5 years and less than 10 years. As a result, intuitive screen and menu composition and user's perception of content were evaluated as the most important factors, and conclusions such as the need to improve the structure and function of the main content screen for user error prevention and usability were drawn. This study will not only contribute to improving the usability of existing time management mobile apps, but will also be used as a material for designing an integrated time management platform for efficient time management and purpose promotion in the future, and is expected to be used as an academic reference.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.253-265
• /
• 2021

In this study, crop cultivation filed was extracted by using Unmanned Aerial Vehicle (UAV) imagery and deep learning models to overcome the limitations of satellite imagery and to contribute to the technological development of understanding the status of crop cultivation field. The study area was set around Chungbuk Goesan-gun Gammul-myeon Yidam-li and orthogonal images of the area were acquired by using UAV images. In addition, study data for deep learning models was collected by using Farm Map that modified by fieldwork. The Attention U-Net was used as a deep learning model to extract feature of UAV in this study. After the model learning process, the performance evaluation of the model for corn cultivation extraction was performed using non-learning data. We present the model's performance using precision, recall, and F1-score; the metrics show 0.94, 0.96, and 0.92, respectively. This study proved that the method is an effective methodology of extracting corn cultivation field, also presented the potential applicability for other crops.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.39-48
• /
• 2018

Despite the fact that Daejeon has excellent technology infrastructures such as government-funded research institutes, Daedeok Innopolis, and KAIST, the infrastructure for initial investment and growth support for technological start-ups is not sufficient. In particular, the amount of venture capital supply in Daejeon is relatively low compared to other innovation infrastructures. The purpose of this study is to suggest the implications of the venture capital ecosystem in Daejeon area through the analysis of what evolution process has been undergoing and what improvements and complementary points are needed in the future. First, the role of public finance system should be strengthened in order to stimulate angel investment and private capital inflows to start-up companies. Second, in order to cultivate investment professionals in the region, it is necessary to grant local funds to local institutions, and to run investment expert training courses in universities. Third, cooperation between related agencies is needed to add accelerator functions to existing incubators and to foster new accelerators. Fourth, in order to expand the role of local governments, it is necessary to establish funds, to open innovation mindset of public officials, and to communicate effectively with the central government. Fifth, basic venture ecosystem infrastructures such as inflow of excellent manpower, prevention of technology deception, improvement of rechallenge environment should be expanded. Sixth, it is necessary to reorganize the step-by-step start-up financing policy of 'Establishment - Growth - Exit - Rechallenge'. This study is meaningful in that it has grasped the current status of venture start-up financial ecosystem in Daejeon, which is changing rapidly. In particular, it is different in that it identifies financial difficulties venture companies in Daejeon and finds ways to utilize existing financial ecosystem efficiently.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.116-123
• /
• 2019

This study focused on defining concepts such as biology push (biology-based biomimicry) and technology pull (technology problem-based biomimicry) in the multidisciplinary field of ecological imitation and analyzing the status of related research and technology at the domestic and international levels. From an ecological point of view, biomimicry is defined as ecological mimicry in which ideas obtained through classification and investigation of principles of biology and ecology are applied to the concepts of engineering and technology. We also defined the biology push as the ecological imitation based on biological characteristics starting from an ecological viewpoint and technology pull as the ecological imitation based on technical problems starting from technical needs. Although biomimicry studies often focus on the technology development by finding stable and eco-friendly source materials from biological and ecological characteristics, we wanted to emphasize the unlimited potential of research of biomimicry that can begin with an idea based on biological and ecological characteristics. This study presents the need to develop the research and technology further based on the biological and ecological viewpoints that can contribute to future sustainable development.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.68-75
• /
• 2019

This study aims to look at the application methods of landscape architecture in response to the 4th Industrial Revolution. The results of the analysis of trends in the 4th Industrial Revolution and the subsequent search for application methods to the field of landscape architecture are as follows. First, the 4th Industrial Revolution means innovative change based on digital technology and seeks to create value based on intelligent information technology, and continuous growth is being made through innovation. This requires expertise to collect large amounts of information and creatively rework it, and a strategy to flexibly cope with changes in the times. Second, the status of technological use in response to the 4th Industrial Revolution in the field of landscape architecture is generalizing the establishment of precise analysis results such as survey technology and global mapping using drones, three-dimensional design simulation, and VR. In the field of traditional landscape architecture, efforts are made to obtain accurate fact-finding data on landscape site components. Third, the application methods in the field of landscape science according to the 4th Industrial Revolution in the future are required to supply precision technology and supply programs in the technology sector, and to provide a shared platform. In addition, a systemically standardized process will need to be established for this. In addition, educational efforts should be continued to professional manpower training and provide economic support for the development of technologies.