• Asia Marketing Journal
• /
• v.16 no.3
• /
• pp.35-56
• /
• 2014

With rapid change and intensive competition in the global economy, the capability to capture, absorb, develop, and transfer new knowledge is a key organizational success factor. Through effective learning, companies are more likely to develop the innovation, quality, and responsiveness essential to meet the growing expectations of customers and the disruptive threats of competitors and new technologies. In the paper the role of technological innovation and its relationship to organizational learning in managing technology-based new products are examined. Several factors which can influence the rate and effectiveness of organizational learning are identified. Barriers to learning also are discussed. Finally, several managerial implications and propositions for future research on learning and technological innovation are advanced.

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.2003-2011
• /
• 2021

Objective: The aim of this study was to evaluate the effect of marinating turkey meat with buttermilk and acid whey on the technological traits and microbiological quality of the product. Methods: Slices of turkey meat muscles were marinated for 12 hours in buttermilk (n = 30), acid whey (n = 30) and comparatively, in lemon juice (n = 30). The control group (n = 30) consisted of unmarinated slices of turkey breast muscles. Physical parameters (pH, water holding capacity, colour L^*a^*b^*, shear force, weight loss) were assessed and quantitative and qualitative microbiological evaluation of raw and roasted products was performed. The microbiological parameters were determined as the total viable counts of mesophilic aerobic bacteria, of the Enterobacteriaceae family, and Pseudomonas spp. Bacterial identification was performed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Results: Marinating turkey meat in buttermilk and whey compared to marinating in lemon juice and the control sample resulted in a higher (p<0.05) degree of yellow color saturation (b^*) and a reduction (p<0.05) in the number of mesophilic aerobic bacteria, Pseudomonas spp. and Enterobacteriaceae family as well as the number of identified mesophilic aerobic bacteria in both raw and roasted samples. The lowest (p<0.05) shear force values were found in products marinated in whey. Conclusion: The use of buttermilk and acid whey as a marinade for meat increases the microbiological safety of the product compared to marinating in lemon juice, while maintaining good technological features of the product.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.721-728
• /
• 2007

The prediction of quality characteristics during the design phase of a construction project was fragmented, because no particular method exists. One of the most important key responses is the total displacements (horizontal and vertical). A brainstorming session produces the quality parameters i.e. the control factors which here are identified as: the steel joint, the pile's length, the excavation depth and angle, the distance between the piles, the anchor stretch and length to name just some of the most engaging in the design. The purpose of this study is to optimise these parameters to minimize the total displacements following a methodology based on Taguchi method. For this reason, a 2-level, L₈ orthogonal array has been employed to organize the experimentation. Data is obtained from a real-life excavation project designed on the Plaxis v.8 CAE package. Taguchi analysis is performed in the statistical package Minitab.

• International Journal of Stem Cells
• /
• v.17 no.2
• /
• pp.130-140
• /
• 2024

Cardiac organoids have emerged as invaluable tools for assessing the impact of diverse substances on heart function. This report introduces guidelines for general requirements for manufacturing cardiac organoids and conducting cardiac organoid-based assays, encompassing protocols, analytical methodologies, and ethical considerations. In the quest to employ recently developed three-dimensional cardiac organoid models as substitutes for animal testing, it becomes imperative to establish robust criteria for evaluating organoid quality and conducting toxicity assessments. This guideline addresses this need, catering to regulatory requirements, and describes common standards for organoid quality and toxicity assessment methodologies, commensurate with current technological capabilities. While acknowledging the dynamic nature of technological progress and the potential for future comparative studies, this guideline serves as a foundational framework. It offers a comprehensive approach to standardized cardiac organoid testing, ensuring scientific rigor, reproducibility, and ethical integrity in investigations of cardiotoxicity, particularly through the utilization of human pluripotent stem cell-derived cardiac organoids.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.3
• /
• pp.85-101
• /
• 2004

The revolution of information in information society innovates a lot of business processes. and the renewed processes contribute new paradigms of the 21th century. As one of the revolutions, ISO 9000 becomes a standard for developing efficient quality management systems which provide any-time and any-where environments satisfying customer needs. Thus, it becomes important to research on quality management systems for improving quality in information flowing and service domain. In this paper, we describe the applicable direction and the case study of ISO 9001 : 2000 which establishes quality management systems in the domain and hope to help for the Quality enhancement.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.232-241
• /
• 2019

Stakeholder management in construction projects is an important factor in project performance creation. The purpose of this study is to verify the effect of the recognition of the importance of the quality influence factors among the stakeholders of the construction project on the perceived quality and the project performance. The impact of the project management methodology on the project performance has been actively researched, but there is little research result on the project stakeholders. The projects to be researched are apartments and buildings that have been completed within the last five years of domestic large construction company. The method of survey is to measure the consensus of the importance of the quality influential factors among the three parties such as the ordering party, the design supervisor and the constructor, and confirm whether the agreement affects the quality of the actual project. Finally, the research model was verified by surveying the satisfaction of the client on the final product. The results are as follow. The degree of agreement on the importance of quality influential factors among stakeholders has a significant effect on perceived quality. In the relationship between perceived quality of influence factors, organizational (support) quality influenced technological quality and managerial quality, and technological quality and managerial quality also have significant influence on resource quality. The results of analysis showed that perceived quality of resources strongly influenced project performance. The remaining three experienced qualities also significantly affect project performance.

• Advances in nano research
• /
• v.16 no.2
• /
• pp.165-173
• /
• 2024

The production of multipurpose cotton fabrics aimed at elevating the quality of aerobic and dance sportswear is explored in this study. Powder metallurgy, known for its high efficiency in manufacturing technological components with minimal waste, is employed as a method for fabricating brush ferrules for painting. The utilization of iron-copper material, prepared through powder metallurgy, enhances the strength and quality of the brush ferrules. A microscopic analysis reveals a robust interconnection between the particles of each layer achieved through isostatic pressure, resulting in a favorable microstructure. The relative density and strength of parts produced from copper-iron powder exhibit an increase with higher pressure levels. The application of this material in brush ferrules ensures their durability and longevity, thereby supporting the creation of artwork. The evolution of art over time reflects changing ideas and possibilities, and technological advancements have significantly improved artistic tools. The role of tools in artistic expression is paramount, and the integration of powder metallurgy materials in brush ferrules fortifies their artistic importance. In summary, this study underscores the advantages of powder metallurgy in augmenting the quality of art tools and facilitating artistic creation.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.205-220
• /
• 2016

The purpose of this research was to figure out what impacts technology and market orientation have on technological cooperation and management performance by analyzing the factors of technological cooperation aimed at firm's product development. In addition, the research was purported to help CEO and policy makers make better decision about technological cooperation by means of the systematic examination on the impacts that different factors of technological cooperation have on the management performance. For this purpose, it was analyzed first what kind of technology or factors of market orientation might affect manufacturer's technological cooperation. From the analysis, it was found that technological cooperation is affected by the factors of market orientation, which means that a firm needs strategic technological cooperation by taking into account multi-dimensional factors of technology and market when the firm aims at developing technology and market orientation. Second, it was analyzed whether a firm's technological cooperation has an impact on its performance. The results indicated that the impact differs in the degree of process of technological cooperation, implying that managing firm's technological cooperation is important in order to improve the quality of management performance. Third, it was analyzed through what structural relations technology and market orientation could exercise impacts on management performance. It was discovered from the 1analysis that technology and market orientation have an impact on management performance. To improve management performance, it seems essential to determine the order of priority among technology and factors of market orientation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.9-17
• /
• 2013

The purpose of this study is to figure out the impacts of technological innovation and cost management on productivity in small shipping industries to come up with developmental implications. To achieve this, a survey was carried out to 150 workers in small shipbuilding industries through April 2 to April 20, 2012. As for findings stated above, technological innovation and cost management in the Korean small shipbuilding industries were key factors that elevate financial and non-financial productivity. In the light of low technological prowess and cost structure of small shipbuilding industries, their productivity can be improved when intensive cost management with production factor technology as know-how is realized through quality management, which product development technology is the top priority as an independent niche strategy. Consequently, the combination of infrastructures in small shipbuilding industries with continuous efforts for cost reduction by the link to the systematized structure can't only secure their independent competitiveness, but raise their productivity.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2001.05a
• /
• pp.411-430
• /
• 2001

This Paper analyses characteristics of the numerical controller industry in market formation and the flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation between users and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cradle market to them which produce inferior quality and lower price than imported products. The credibility of the performance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, which have been conventional means of knowledge transmission, are not useful in the numerical controller industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. It is conjectured that these characteristics are derived from the fact that the numerical controller is the result of IT based technological convergence in controlling machining process. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology Policy.