• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.96-101
• /
• 2019

Chemicals Control Act have been strengthened to control more safely hazardous chemicals from 2015. In particular, the standards for the installation and management of handling facilities was enhanced with specific regulations depending on type of the facilities and the hazardous chemicals. However, some standards for handling facilities caused difficulties in implementing the strengthened standards due to various field conditions, such as lack of physical space. The Ministry of Environment is implementing Safety Assessment System (SAS) to solve these problems since 2018. However, many plants have difficulties in preparing alternative methods to pass the safety evaluation. The purpose of this study was to review and analyze the SAS and to suggest alternative measures in terms of management and technical aspects through the case study of hydrochloric acid storage tanks. The following safety solutions were suggested for handling facilities that had insufficient the space and capacity for the retaining wall due to physical space. Firstly, insufficient space was resolved by introducing equipment relocation or demolition, and retaining wall expansion. Secondly, the wall of the surrounding buildings was used as an alternative to the retaining wall with additional chemical resistant treatment. Finally, sensor installation and facility inspection were suggested as ways to improve chemical safety. Therefore, improvement of chemical accident prevention system is required not only in terms of facilities supplementation but also management aspect. The results of this study are expected to be available for similar facilities and will be based on the preparation of additional safety assessment as alternatives measures in the future.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.402-408
• /
• 2019

Purpose: The study want to verify application the medium expantion foam extinguisher of expantion foam rate and fire extinguishing Performance test because the medium expansion system can maintain the discharge distance less affected by air currents, and the foam agent can be used efficiently. Method: For the study, the medium-expansion testing apparatus was manufactured and with synthetic surfactant foam agent of (class B) fire extinguishing model, and Fire Performance was analyzed for foam expansion rate and the fire agent consumption was measured and analyzed. Results: We measured the medium-spray testing apparatus and found that the expansion rate was 26.1 times. The test results of a 20-unit fire extinguishing model show that the extinguishing time is faster than the high and low foam expansion. It has been analyzed that it is possible to apply a hand-operated with a hose reel or medium expansion apparatus. Conclusion: Considering that the foaming agent and the extinguishing performance of the medium foam ratio are excellent, It is necessary to introduce the technical standards of medium foam agent for the introduction of hand-operated equipment, such as hose reel or portable medium foam apparatus.

• Informatization Policy
• /
• v.26 no.1
• /
• pp.46-61
• /
• 2019

The Fourth Industrial Revolution has been revolutionizing industry and education. This paper proposes an education platform, Smart Space EduPlatform (SSEP), for the real estate industry, aimed at educating the basic real estate technology (RETech) for workers in the real estate industry so they can achieve the highest and best use of the real estate in the smart environment. The habitat of SSEP is driven by the donation system ensuring sustainability, various technical functions such as tools for content production and learning participation, and learning behavior frameworks each in form of a learner, a teacher, and a helper. Services of SSEP consist of 17 important RETech lectures under 6 categories-planning and design, decision-making, management, economics, construction, and equipment-and project-based learning (PBL) curriculums. The lectures are provided along with video contents, additional learning materials and learning management service, while teachers' workshops, learner invitation and registration management, curriculum operation services are offered for the PBL curriculums.

• Health Policy and Management
• /
• v.31 no.3
• /
• pp.244-254
• /
• 2021

The management of emerging infectious diseases cannot help but completely depend on non-pharmaceutical interventions in the early stages of the outbreak. Consequently, South Korea has developed and implemented the 3T (test-trace-treat) models, non-pharmaceutical infection prevention and control (IPC) measures, in response to the coronavirus disease 2019 (COVID-19) pandemic. The IPC measures have gained global attention, rendering them to be essential in the development of a shareable, reusable, and applicable protocol for future pandemics. This study was conducted to identify the requirements necessary for standardizing the IPC measures. Three new work items of the 18 3T models were proposed to ISO/TC 304 (International Organization for Standardization/Technical Committee 304; healthcare organization management). Requirements for each IPC measure, identified by participating members (P-members) countries during the ISO ballots, were analyzed in this study. The three new work items were approved by the P-members countries after a 3-month ballot. There was a consensus that the three IPC measure models should be International Standards (IS). Other comments include (1) the models should include not only COVID-19 but also any respiratory pandemic; and (2) keep donning of level D protection at screening sites as an optional protocol, in consideration for the lack of personal protective equipment. Standardization is a systematic process of developing internationally agreed-upon wisdom and knowledge that consider and respect the diversity and universality of each country. It is expected that such standardized applicable IPC measure models contribute to global efforts to rapidly respond to a public health emergency of international concern during its early stages.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.79-85
• /
• 2021

A standard engineering model that reflects the current organization system and engineering operation process of domestic nuclear power plants was developed based on the Standard Nuclear Performance Model developed by the American Nuclear Energy Association. The level 0 screen, which is the main screen of the engineering model computer system, consisted of an object tree structure, which provided information that is phased down from a higher structure level to a lower structure level (i.e., level 3). The level 1 screen provided information related to the sub-process of the engineering operation, whereas the Level 2 screen provided information related to each engineering operation activity. In addition, the Level 2 screen provided additional functions, such as linking electronic procedures/guidelines, providing electronic performance forms, and connecting legacy computer systems (such as total equipment reliability monitoring system, configuration management systems, technical information systems, risk monitoring systems, regulatory information, and electronic drawing system). This screen level increased the convenience of user's engineering tasks by implementing them. The computerization of an engineering model that connects the entire engineering tasks of an establishment enables the easy understanding of information related to the engineering process before and after the operation, and builds a foundation for the enhancement of the work efficiency and employee capacity. In addition, KHNP developed an online training module, which operates as an e-learning process, on the overview and utilization of a standard engineering model to expand the understanding of standard engineering models by plant employees and to secure competitiveness.

• The Journal of Internal Korean Medicine
• /
• v.41 no.6
• /
• pp.984-992
• /
• 2020

Objectives: This survey research was conducted to evaluate real-time non-face-to-face education in clinical Korean medicine conducted during the COVID-19 outbreak. Methods: This study was conducted with all 3rd and 4th grade students of the Department of Korean Medicine, Gachon University. The Korean Internal Medicine (Pulmonary) lecture course was held from April 1st to July 1st, 2020 for one semester. The lectures were conducted through real-time non-face-to-face education using the Cisco Webex program, and the lectures were mainly conducted by sharing a PowerPoint summarizing textbook. The questionnaire consisted of 3 parts and a total of 18 questions. The survey was conducted anonymously to ensure the confidentiality of all responses. Results: The overall score for real-time non-face-to-face education was 74.69±18.15 points. The efficiency of real-time non-face-to-face education was 2.12±0.78 points, and opinions on the expansion of future use were 2.08±0.91 points and were generally positive. The ratio of non-face-to-face education and face-to-face education in future clinical Korean medicine theory lectures was about 63:27, with a higher proportion of non-face-to-face education. Conclusions: Promoting clinical Korean medicine as a non-face-to-face education has generally been positively evaluated in terms of efficiency and overall, and its use should be expanded in the future. In particular, it will be necessary to use non-face-to-face education in the theory classes of clinical Korean medicine. However, technical problems involving internet, video, equipment, and communication tools will need to be improved in the future.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.133-140
• /
• 2018

In recent years, model-based design techniques have been used as a way to support cost reduction and safety certification in the development of avionics systems. In order to support performance analysis and safety analysis of aircraft and avionics equipment (item) using model based design, we developed a multi-domain simulation environment that inter-works with heterogeneous simulators. We present a multi-domain simulation environment that can verify air data computers and integrated multi-function probes at the aircraft level. The model was developed by Simulink and the flight simulator X-Plane 10 was used to verify the model at the aircraft level. Avionics model functions were tested at the aircraft level and the air data errors of the model and flight simulator were measured within 0.1%.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.146-153
• /
• 2021

Recently, research on perovskite semiconductor materials has been performed, and the evaluation of properties using surface treatment for this material is the basis for subsequent studies. We studied the results of surface treatment of perovskite thin films exposed to air for about 6 months by generating oxygen plasma with an atmospheric pressure plasma equipment. The reason for exposure for 6 months is that the perovskite thin film is made of organic and inorganic substances, so when exposed to air, the surface changes through reaction with oxygen or water vapor. Therefore, this change is to investigate whether it is possible to restore the original film. The surface shape and the ratio of elements were analyzed by varying the process time from 1 s to 1200 s in an oxygen plasma atmosphere. It was found that the crystal grains change over a process time of 5 s or more. In order to maintain the properties of the deposited film, it is the optimal process condition between 2 s and 5 s.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.7
• /
• pp.57-64
• /
• 2022

In this paper, the definition and overview of digital health care that has emerged recently, core technology, and We would like to propose a plan to establish a next-generation information protection system that can protect digital healthcare devices and data from cyber attacks. Various vulnerabilities exist for digital healthcare devices and data, and cyber attacks are possible for those vulnerabilities. Through an attack on digital health care devices and information and communication networks, it can directly adversely affect human life and health, Since digital healthcare data contains sensitive and personal information, it is essential to safely protect it from cyber attacks. In the case of this proposal, for continuous safe management of data and cyber attacks on equipment and communication networks for digital health devices, It is expected to be able to respond more effectively and continuously through the establishment of the next-generation information protection system.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.537-550
• /
• 2021

There are various technical problems need to be solved in the construction process of pre-setting an isolation wall into a double lane in the outburst prone mine. This study presents a methodology that pre-setting an isolation wall into a double lane without a coal pillar. This requires the excavation of two small section roadways to dig a wide section roadway, followed by construction of the separation wall. During this process the connecting lane is reserved. In order to ensure the stability of the separation wall, the required bearing capacity of the isolation wall is 4.66 MN/m and the deformation of the isolation wall is approximately 25 cm. To reduce the difficulty of implementing support the roadway is driven by 5 m/d. After the construction of the separation wall, the left side coal wall is brushed 1.5 m to make the width of the gas roadway reach 2.5 m and the roadway support utilizes anchor rod, ladder beam, anchor cable beam and net configuration. During construction, the concrete pump and removable self-propelled hydraulic wall mold are used to pump and pour the concrete of the isolation wall. In the process of mining, the stress distribution of coal body and isolation wall is detected and measured on site. The results demonstrate that the deformation of the surrounding rock of roadway and separation of roof in the roadway is small. The stress of the bolt and anchor cable is within equipment tolerance validating their selection. The roadway is well supported and the intended goal is achieved. The methodology can be used for reference for similar mine gas control.