• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.307-316
• /
• 2016

다층 방어 시스템은 표적의 장거리 조기탐지를 위해 조기 경보 레이다를 활용하고, 정밀 요격 통제를 위해 대공 레이다를 활용하는 방식을 취한다. 그러므로 레이다들 사이에 표적 인계 과정을 필요로 하게 되는데, 추적의 안정화 및 교전 통제를 고려하여 적절한 시점에 표적 인계가 이루어져야 한다. 본 논문에서는 다층 레이다 시스템의 운용 특성을 분석하고, 고속표적에 효과적으로 대응하기 위한 추적 성능 예측 기반의 표적 인계 시점 결정기법을 제안하였다. 또한, 탄도탄 방어 시나리오를 포함하는 통합 시뮬레이터 환경에서 제안 기법을 검증하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 춘계학술발표대회
• /
• pp.595-598
• /
• 2020

IoU (Intersection over Union) is the most commonly used index in target detection. The core requirement of target detection is what is in the image and where. Based on these two problems, classification training and positional regression training are needed. However, in the process of position regression, the most commonly used method is to obtain the IoU of the predicted bounding box and ground-truth bounding box. Calculating bounding box regression losses should take into account three important geometric measures, namely the overlap area, the distance, and the aspect ratio. Although GIoU (Generalized Intersection over Union) improves the calculation function of image overlap degree, it still can't represent the distance and aspect ratio of the graph well. As a result of technological progress, Bounding-Box is no longer represented by coordinates x,y,w and h of four positions. Therefore, the IoU can be further optimized with the center point and aspect ratio of Bounding-Box.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.369-375
• /
• 2017

One of good DF(Direction Finding) methods is based on TDOA(Time Difference of Arrival) estimation when finding underwater moving target. For small DF error, high time resolution A/D(Analog-to-digital) conversion board and long baseline are needed. But the result of sea trial about close-range and high speed moving target, spatial correlation coefficient and appeared poor properties below 0.3 when hydrophone arrangement are separated over 6 ${\lambda}$ because of underwater fading channel. And we also find out that the distance between hydrophone should be under 4 ${\lambda}$ apart to take advantage of spatial correlation coefficient gain and performance of DF in underwater moving channel environments.

• 아시아태평양코퍼스연구
• /
• 제4권2호
• /
• pp.41-55
• /
• 2023

In data-driven learning (DDL), learners explore a corpus to understand vocabulary and grammar. Although many studies have emphasized the role of DDL in second language (L2) acquisition, L2 light verbs have been largely under-explored. To bridge this gap, this study focused on the learning outcomes of L2 light verbs among 29 intermediate-level Japanese university students. The research zeroed in on six prevalent light verbs in English: "make," "do," "take," "have," "give," and "get." Over nine weeks, the participants engaged with verb-noun collocations using worksheets that juxtaposed Japanese translations of the target collocations with their English equivalents, with the verbs omitted. With the aid of Wordbanks Online, they filled in the blanks and constructed accurate sentences. Before this activity, a 20-minute tutorial was given to the participants on how to interpret the concordance lines. The effectiveness of the DDL method was evaluated using pre-tests, immediate post-tests, and delayed post-tests. The results showed that DDL significantly improved the participants' knowledge of the target collocations of light verbs and nouns; the post-test and delayed post-test scores were significantly higher than the pre-test scores. The results showed that, overall, DDL contributed to memorizing the collocations of light verbs and nouns; however, DDL had different effects on the memorization of collocations across different light verbs. The extent of work on the worksheet is not the only factor in its retention, and observing concordance lines may promote learners' memorization of light-verb collocations.

• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.43-49
• /
• 2015

탐색기 적용 전술유도무기의 탐색기는 전술유도무기 개발 간 제한된 직경과 무게로 설계된다. 이러한 경우, 하드웨어 특성에 의해 탐색기 시야각, 분해능, 추적 알고리즘 등의 탐색기 성능에 제한이 존재하게 되고, 이로 인해 최대 표적포착 가능거리가 정해지게 된다. 장사거리용 전술유도무기의 경우 최대 표적포착 가능거리 이전까지는 INS 순수항법 또는 GPS/INS 통합항법으로 항법 유도비행을 수행하는데, INS 순수항법은 비행시간이 증가함에 따라 항법성능이 급격하게 감소하고, GPS/INS 통합항법의 경우 재밍상황에서 항법성능이 급격하게 감소한다. 본 논문에서는 앞서 언급한 최대 표적포착 가능거리와 항법장치 성능등 다양한 변수를 고려하여 전술유도무기 체계 관점에서 탐색기 영상 내 표적존재확률에 대해 분석할 수 있는 시뮬레이션을 수행하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2018

According to the nation's greenhouse gas emission statistics, greenhouse gas emissions have been stiffly increasing. Accordingly, the importance of CO₂ reduction is more getting focused over the world. This trend makes the construction equipment be considered as a major target of reduction due to the large volume of emission. This study suggests the feasible methodology for estimating CO₂ emission from construction equipment and for being easily applied on the job sites. The methodology is based on the collection from the segmented CO₂ emission information of construction equipment. This study allows site personnels to estimate the total amount of CO₂ and to take appropriate actions for reasching the environmental regulations.

• 전자공학회논문지CI
• /
• 제48권5호
• /
• pp.16-23
• /
• 2011

Gunnery로부터 발생하는 muzzle firing은 매우 높은 에너지를 방출하는 표적으로 볼 수 있다. 따라서, xx km 이상의 원거리 gunnery의 경우 일반 CCD 영상으로는 식별하기 어렵지만, IR(infrared) 영상에서는 충분히 식별될 수 있다. 본 논문에서는 원거리 IR 영상으로부터 muzzle firing으로 발생되는 profile을 획득하여 분류하는 기법을 제안한다. IR 센서(infrared sensor)의 특성, 거리, 대기 상태 등에 따라 muzzle firing으로 발생하는 에너지는 서로 다른 양으로써 IR영상에 표현된다. 따라서, 단순히 IR 영상의 픽셀값으로 gunnery 종류를 분류하는데는 명확한 한계가 있다. 제안하는 기법에서는 xxx Hz 이상의 고속 장비를 이용하여 muzzle firing이 이루어지는 구간내에서 시간에 따른 픽셀값의 profile을 획득하여 형태기반의 특징을 추출한 후, 피셔 공간(Fisher's space)로 투영시켜 GMM(Gaussian Mixture Model)을 이용하여 gunnery의 종류를 분류한다. 제안하는 기법을 이용하여 지상 및 공중에서 획득한 gunnery에 대하여 분류 실험을 수행한 결과 파라미터에 따라 최대 93%의 분류율을 확인하였다.

• Child Health Nursing Research
• /
• 제13권3호
• /
• pp.318-328
• /
• 2007

Purpose: Because it is important to prevent adolescents from becoming involved in smoking, this study was done to explore important factors influencing cigarette use and the increase in smoking frequency. Method: For this study the Korea Youth Panel Survey (KYPS) was analyzed. Because the KYPS is longitudinal, a fixed effect regression method was used to control for the effects of time-independent factors. More specifically, a logistic regression was used to explore factors affecting cigarette use, and a Poisson regression was used to explore smoking frequency. Result: As the adolescents got older, the number of male adolescents who tried smoking increased, while the number of female adolescents who tried smoking decreased. Also, the frequency of cigarette use among male and female smokers increased over time. Significant factors affecting cigarette use were friends who smoked, delinquent behavior, and loneliness at schools. Important factors affecting the increase in smoking frequency were grade (e.g., the 2nd- and 3rd-year of middle school), friends who smoked, delinquent behavior, monthly pocket money, expectation for the highest level of education, and attack tendency. Conclusions: To solve the problems linked to adolescent smoking, it is critical to develop intervention programs that target specific homogeneous subgroups of smokers, and that take into consideration gender difference in smoking and factors affecting levels of smoking behavior.

• 농촌지도와개발
• /
• 제24권1호
• /
• pp.1-8
• /
• 2017

The Purpose of this study is to predict farm size per farming household in Chungcheongnam-province by using the Markov chains and Quadratic Programming.. The results are as follows; First, small-scale farms with less than 1.0ha of land are predicted to be still more than half (of total farming households) in 2025 as well. Second, large-scale farms with 3.0ha-5.0ha land and extra large-scale farms with over 5.0ha of land are predicted to gradually expand their proportion in total farm scale. Third, middle-scale farms with 1.0ha-3.0ha land are forecasted to be reduced in their relative proportion. It is required to take into account regional characteristics to improve the effectiveness of a rice industry policy. Therefore, this study has some significance in attempting to research on the ownership structure of rice production areas in consideration of target regions.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.11-15
• /
• 2016

FE analyses for weldment of ship structure are required for various reasons such as stress concentration for bead tow, residual stress and distortion after welding, and hydrogen diffusion for prediction of low temperature crack. These analyses should be done by solid element modeling, but most of ship structures are modeled by shell element. If we are able to make solid element in the shell element FE modeling it is easily to solve the requirement for solid elements in weld analysis of large ship structures. As the nodes of solid element cannot take moments from nodes of shell element, these two kinds of element cannot be used in one model by conventional modeling. The PSCM (Perpendicular shell coupling method) can connect shell to solid. This method uses dummy perpendicular shell element for transferring moment from shell to solid. The target of this study is to develop a FE pre-processing system applicable at welding at ship structure by using PSCM. We also suggested glue-contact technique for controlling element numbers and element qualities and applied it between PSCM and solid element in automatic pre-processing system. The FE weldment modeling through developed pre-processing system will have rational stiffness of adjacent regions. Then FE results can be more reliable when turn-over of ship-block with semi-welded state or ECA (Engineering critical assessment) of weldment in a ship-block are analyzed.