• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2017

Tool path generation is a part of process planning in 3D printing. This is done before actual printing by a computer rather than an AM machine. The mesh geometry of the 3D model is sliced layer-by-layer along the Z-axis and tool paths are generated from the sliced layers. Each 2-dimensional layer can have two types of printing paths: (i) shell and (ii) infill. Shell paths are made of offset loops. During shell generation, twists can be produced in offset loops which will cause twisted tool paths. As a twisted tool path cannot be printed, it is necessary to remove these twists during process planning. In this research, An algorithm is presented to remove twists from the offset loops. To do so the path segments are traversed to identify twisted points. Outer offset loops are represented in the counter-clockwise segment order and clockwise rotation for the inner offset loop to decide which twisted loop should be removed. After testing practical 3D models, the proposed algorithm is verified to use in tool path generation for 3D printing.

• Electrical & Electronic Materials
• /
• v.27 no.10
• /
• pp.11-21
• /
• 2014

1975년 이후로 태양전지 평가 실험실과 제조업체들이 직접적으로 많은 노력을 하여 태양전지 모듈에 대한 가속 스트레스 평가를 개발하고 평가하였다. 이 노력들은 이미 알려진 불량 메커니즘을 토대로 모듈 디자인의 민감한 취약 부분을 발견하기 위한 평가를 목적으로 평가 순서/방법 표준화에 많은 기여를 하였다. 이러한 평가 순서/방법은 국가와 국제 모듈 규격 표준화에 적용되었다. 그리고, 실제 외부에서 설치되어 한 번도 문제가 발생되지 않은 평가들은 중간에 제거 되기도 하였다. 가장 대표적인 예로 twist test는 모듈 설치 후 발생되는 불량에 대한 평가이지만, 실제로 불량은 한번도 발견되지 않았다. 덧붙여서, 표준 평가들은 많은 특화된 가속평가를 사용하게 되는데, 이는 문제점들을 조사하거나 특정 모듈 디자인에 대한 잠재적인 불량을 조사하기 위함이다. 실제 수명예측을 위한 가속평가는 가속 인자의 지식이 반드시 필요하지만, 태양전지 분야에서는 문헌이 많이 부족하다. 많은 연구자들이 85/85 DH 평가시간과 습한 지역에서 수년 간 사용된 모듈과의 상관관계를 만들기 위해 시도 하였다. 그리고 이 모델은 DH 평가 표준시간인 1,000시간으로 정의하는데 많은 영향을 미치기도 했다. 하지만, 이 모델은 단지 단일 모드 불량일 경우에만 적용이 되는 것이다. 다른 불량에 대한 가속인자들은 여전히 잘 알려져 있지 않다. 따라서, 모듈이 비록 표준 규격시험을 통과했다고 하더라도 제품이 특정 기간 동안 전력을 생산할 수 있다고 말할 수 없다. 또한, 이 표준평가가 모든 불량 메커니즘에 대한 평가가 되지 않기 때문에 제품의 수명을 결정하는데 사용될 수 없다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.1
• /
• pp.34-43
• /
• 2006

헬기는 비행에 필요한 추력, 모멘트 및 조종력을 회전하는 로터시스템에서 발생시키기 때문에 근본적으로 진동이 많이 생기는 항공기이다. 로터시스템의 회전에 의해 발생되는 진동소스를 제어함으로써 헬기 동체에 전달되는 진동을 감소시키고자 하는 연구들이 지금까지 수많이 진행되었다. 이러한 연구들을 크게 두 가지로 분류하면, 수동적 진동제어 방법과 능동적 진동제어 방법으로 나눌 수 있다. 수동적 진동제어 방법은 그간 오랫동안 연구되어 현재 운용 헬기에 실제적으로 적용되고 있으나 능동적 진동제어 방법은 최근까지 활발한 연구가 진행되고 있는 상태이다. 본 논문의 서론에서는 헬기 진동제어를 위한 일반적인 방법에 대한 개요를 소개하였다. 본문은 로터시스템 진동제어 기술 중 최근까지 연구가 진행되고 있는 능동적 진동제어 방법을 중심으로 기술하였다. 특히 최근 비행시험에 성공하여 거의 실용화 단계에 이르고 있는 PZT를 이용한 Trailing Edge Flap 기술, Active Twist Rotor 등을 중점적으로 소개하였다. 마지막으로 유로콥터 BK117의 ADASYS 로터 시스템 성공사례 및 향후 해결해야 할 기술적 제한사항 등을 간략하게 기술하였다.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.163-171
• /
• 2016

A modular manipulator in serial-chain structure usually consists of a series of modularized revolute joint and link modules. The geometric shapes of these modules affect the number of possible configurations of modular manipulator after assembly. Therefore, it is important to design the geometry of the joint and link modules that allow various configurations of the manipulators with minimal set of modules. In this paper, a new 1-DoF(degree of freedom) joint module and simple link modules are designed based on a methodology of joint configurations using a series of Rotational(type-R) and Twist(type-T) joints. Two of the joint modules can be directly connected so that two types of 2-DoFs joints could be assembled without a link module between them. The proposed geometries of joint and link modules expand the possible configurations of assembled modular manipulators compared to existing ones. Modular manipulator system of this research can be a cornerstone of user-centered markets with various solution but low-cost, compared to conventional manipulators of fixed-configurations determined by the provider.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.473-473
• /
• 2009

There have been many academic researches on the aerodynamic design of wind turbine based on blade element method (BEM) and momentum theory (MT, or actuating disk theory). However, in the real world, the turbine blade design requires many additional constraints more than theoretical analysis. The standard procedure is studied in the present paper to design new blades for the wind turbine system ranged from the small size from 1 to 10 kW. From the experience of full design of a 10 kW blade, the authors tried to set up a standard procedure for the aerodynamic design based on IEC 61400-2. Wind-turbine scale, rotating speed, and geometrical chord/twist distribution at the segmented span positions are calculated with a suitable BEM/MT code, and the geometrical shape of tip and root should be modified after considering various parameters: wing-tip vortex, aerodynamic noise, turbine efficiency, structural safety, convenience of fabrication, and even economic factor likes price, etc. The evaluated data is passed to the next procedure of structural design, but some of them should still be corresponded with each other: the fluid-structure interaction is one of those problems not yet solved, for example. Consequently, the design procedure of small wind-turbine blades is set up for the mass production of commercial products in this research.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.59-66
• /
• 2000

This study was carried out to investigated the water requirement of twisted sweet peppers which are cultivated in a green house. The meteorological conditions during the experiment period was close to that of normal year except the temperature and relative humidity. The growth status was improved with the increased saturation ratio. The range of the variation of daily water requirement were very large. The peak consumption occurred in the early August. And the higher saturation ratio resulted in higher water requirement. The total water requirement were about 57.180g/d/plant for pot with 100% (P100) of saturation , about 38.700g/d/plant for pot with 80%(P80) of saturation , about 23,720g/d/plant for pot with 60%(P60) of saturation, and about 53, 390g/d/plant for field cultivation in the green house, respectively. The water requirement was correlated with average ambient temperature and growing status, while no significant correlation were found between water requirement and minimum relative humidity or intensity of solar radiation. And the higher correlation was shown as the saturation ratio was increased. The transpiration coefficients of twisted sweet pepper were 378.0g/g for field cultivation in the green house, 363.3g/g for P100, 338.7g for P80 which was the smallest among pot cultivation , and 472.1g/g for P60 , respectively.

• The Journal of Korean Physical Therapy
• /
• v.33 no.2
• /
• pp.76-83
• /
• 2021

Purpose: This study examined the effects of applying the Pilates reformer exercise to 17 adult women on the alignment of the standing posture. Methods: The subjects performed a Pilates reformer exercise for 60 minutes a day, three times a week, for a total of eight weeks. The Pilates reformer exercise consisted of five types: 1) lower and lift, 2) hundred, 3) plow, 4) airplane, and 5) twist. The standing posture alignment in the sagittal and frontal planes was measured using exbody 9100MOMI musculoskeletal analysis equipment. Results: A comparison of before and after the exercise using paired t-test revealed a significant decrease in the difference between the horizontal inclination and the vertical height that approached zero after the intervention in the frontal plane of anterior and posterior standing postures (p<0.05), and the lateral standing posture in the sagittal plane. In addition, the difference between the horizontal inclination and the vertical height decreased and approached zero after the intervention (p<0.05). Conclusion: The Pilates reformer exercise had a positive effect on the alignment of the standing posture.

• The Korean Journal of Zoology
• /
• v.21 no.1
• /
• pp.19-27
• /
• 1978

This study has been carried out with the object of researching into the situation of the genetic isolation of a Korean population located near Seoul. The results obtained are summarized as follows: In general, the distribution of P.T.C. threshold values in the population is close to that of the Seoul population. But the nonataster frequency of male in the population is higher than that of female, and this is in agreement with the status of ankyloglossia frequency in male. However the relationship between the two traits has not been clarified. The gene frequencies of rolling and folding of tongue are slightly lower than that of the Seoul population. The gene frequency conditioning the ability to twist the tongue is lower in the male than in the female. The color-blindness is 6.21 percent, and it is slightly higher than that of other Korean population. All considered, the studied population might be regarded to have been kept in genetic isolation.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.22-27
• /
• 2000

The structure of cis-(malonato)[(4R,5R)-4,5-bis(aminomethyl)-2-isopropyl-1,3-dioxolane]platinum(II) with a potent anticancer activity has been determined by the X-ray crystallographic method. Crystal data are as follows: Pt(C/sub 11/H/sub 20/N₂O/sub 6/), M/sub 4/=471.38, monoclinic, P2₁, a=7.112(1), b=33.615(3), c=7.135(1)Å, β=116.80(1)°, V=1522.6(3)Å, and Z=4. The two independent molecules with very similar structures are approximately related by pseudo two-fold screw axis symmetry, which makes the monolinic cell look like the orthorhombic cell with one molecule in the asymmetric unit and space group C222₁. The crystal packing mode is similar to that of the analogue with the dimethyl substituents instead of the isopropyl group. The Pt atom is coordinate to two O and two N atoms in a square planar structure. The six-membered chelate ring in the leaving ligand assumes a conformation intermediate between the half chair and the boat forms. The seven-membered ring in the carrier ligand assumes a twist-chair conformation and the oxolane ring assumes an envelope conformation. Crystal packing consists of the extensive hydrogen-bonding network in the two-dimensional molecular layers and weak van der Waals interactions between these layers.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.288-297
• /
• 2018

Background: The incidence of colorectal cancer (CRC) is increasing, with metastasis of newly diagnosed CRC reported in a large proportion of patients. However, the effect of Korean Red Ginseng extracts (KRGE) on epithelial to mesenchymal transition (EMT) in CRC is unknown. Therefore, we examined the mechanisms by which KRGE regulates EMT of CRC in hypoxic conditions. Methods: Human CRC cell lines HT29 and HCT116 were incubated under hypoxic (1% oxygen) and normoxic (21% oxygen) conditions. Western blot analysis and real-time PCR were used to evaluate the expression of EMT markers in the presence of KRGE. Furthermore, we performed scratched wound healing, transwell migration, and invasion assays to monitor whether KRGE affects migratory and invasive abilities of CRC cells under hypoxic conditions. Results: KRGE-treated HT29 and HCT116 cells displayed attenuated vascular endothelial growth factor (VEGF) mRNA levels and hypoxia-inducible $factor-1{\alpha}$ ($HIF-1{\alpha}$) protein expression under hypoxic conditions. KRGE repressed Snail, Slug, and Twist mRNA expression and integrin ${\alpha}V{\beta}6$ protein levels. Furthermore, hypoxia-repressed E-cadherin was restored in KRGE-treated cells; KRGE blocked the invasion and migration of colon cancer cells by repressing $NF-{\kappa}B$ and ERK1/2 pathways in hypoxia. Conclusions: KRGE inhibits hypoxia-induced EMT by repressing $NF-{\kappa}B$ and ERK1/2 pathways in colon cancer cells.