• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.265-271
• /
• 2018

DC-DC buck converter is a critical building block in the power management integrated circuit (PMIC) architecture for the portable devices such as cellular phone, personal digital assistance (PDA) because of its power efficiency over a wide range of conversion ratio. To ensure a safe operation, avoid unexpected damages and enhance the reliability of the converter, fully-integrated protection circuits such as over voltage protection (OVP), under voltage lock out (UVLO), startup, and thermal shutdown (TSD) blocks are designed. In this paper, these three fully-integrated protection circuit blocks are proposed for use in the DC-DC buck converter. The buck converter with proposed protection blocks is operated with a switching frequency of 1 MHz in continuous conduction mode (CCM). In order to verify the proposed scheme, the buck converter has been designed using a 180 nm CMOS technology. The UVLO circuit is designed to track the input voltage and turns on/off the buck converter when the input voltage is higher/lower than 2.6 V, respectively. The OVP circuit blocks the buck converter's operation when the input voltage is over 3.3 V, thereby preventing the destruction of the devices inside the controller IC. The TSD circuit shuts down the converter's operation when the temperature is over $85^{\circ}C$. In order to verify the proposed scheme, these protection circuits were firstly verified through the simulation in SPICE. The proposed protection circuits were then fabricated and the measured results showed a good matching with the simulation results.

• 한국항행학회논문지
• /
• 제27권5호
• /
• pp.495-501
• /
• 2023

대한민국 해군이 운영하는 P-3C 또는 P-3CK 해상초계기에는 다양한 센서와 통신 장치를 탑재하고 있다. 임무 중 수집된 데이터는 항공기내 비행 조작사들에 의해 전술 정보로 관리되어 저장된다. 비행임무가 종료되면 이 정보는 지상에 있는 전술지원센터로 이관되고 전술분석도구를 통해 재생되거나 후속 업무를 위해 사용된다. 비행임무 시 한국방공식별구역 영역에서만 한 시간 이내 탐지 객체만 수만 개를 갖는다. 이에 대하여 전술분석도구 이용 시 지도를 함께 도시하는 전술 상황표시기에는 탐지 객체들에 대하여 모두 심볼로 표현한다. 표시 심벌의 증가는 전술 상황표시기의 이미지 갱신에 많은 영향을 끼치고 결과적으로 조작사들의 원활한 작업에 지장을 준다. 본 논문에서는 기존 상황표시기의 성능을 개선하기 위해 다중 스레드와 다중 레이어 적용을 제안한다. 그리고 이 제안에 대한 적용과 실행 결과를 통해 전술 상황표시기의 성능향상을 증명한다.

• 대한방사선치료학회지
• /
• 제8권1호
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• 한국강구조학회 논문집
• /
• 제22권3호
• /
• pp.281-291
• /
• 2010

본 연구에서는 횡력을 받는 구조물 거동에 대한 보-기둥 접합부의 영향을 확인하기 위하여 5층 철골구조물을 KBC2005 건축구조 설계기준에 맞게 구조설계 하였으며 접합부를 완전 강접합부로 이상화한 경우와 반강접 접합부로 설계하였다. 철골 보 및 기둥의 모멘트-곡률관계는 화이버모델을 이용하여 확인하였으며 반강접 접합부의 모멘트-회전각 관계는 파워모델 그리고 철골 보, 기둥 및 접합부의 이력거동은 3-매개변수 모델을 이용하여 나타내었다. 5층 철골구조물은 개별골조와 연결골조의 2차원 구조물로 이상화하였다. 4개 지진파의 재현주기 수준별로 산정한 최대지반가속도와 푸쉬오버해석의 최대밑면전단력을 위한 지반가속도에 대하여 시간이력해석을 실시하여 지붕층 변위, 밑면전단력, 층간변위, 접합부 요구연성도, 기둥, 보 및 접합부의 최대모멘트 그리고 소성힌지 분포 등을 확인하였다. 반강접 접합부 골조는 완전 강접합 골조에 비해 적은 밑면전단력이 발생하였으며 기둥, 보 및 접합부에 발생하는 휨모멘트의 크기와 증가율도 적었다. TSD 접합부는 우리나라 설계수준의 지진하중에 대하여 예제 구조물에서 경제성과 안전성을 확보 할 수 있음을 확인할 수 있었다.

• Wind and Structures
• /
• 제22권1호
• /
• pp.107-131
• /
• 2016

The need for a more affordable, reliable, clean and secure energy has led to explorations in non-traditional sources, particularly renewable energies. Wind is one of the cleanest energy sources that plays a significant role in augmenting sustainability. Wind turbines, as energy convertors, are usually tall and slender structures, and depending on their location (inland or offshore), they can be subject to high wind and/or strong wave loadings. These loads can cause severe vibrations with detrimental effects on energy production, structural lifecycle and initial cost. A dissipativity analysis study was carried out to know whether wind turbine towers require damping enhancement or rigidity modifications for vibration suppression. The results suggest that wind turbines are lightly damped structures and damping enhancement is a potential solution for vibration lessening. Accordingly, the paper investigates different damping enhancement techniques for vibration mitigation. The efficacy of tuned mass damper (TMD), tuned liquid column damper (TLCD), tuned sloshing damper (TSD), and viscous damper (VD) to reduce vibrations is investigated. A comparison among these devices, in terms of robustness and effectiveness, is conducted. The VD can reduce both displacement and acceleration responses of the tower, better than other types of dampers, for the same control effort, followed by TMD, TSD, and finally TLCD. Nevertheless, the use of VDs raises concerns about where they should be located in the structure, and their application may require additional design considerations.

• Journal of Radiation Protection and Research
• /
• 제13권1호
• /
• pp.21-30
• /
• 1988

부산의대 부속 병원의 전자선형가속기 (Mevatron 67) 장치를 이용 하여 표면선량의 원인이 되는 광자선의 전자오염에 대한 연구를 하였다. 표면선량은 조사야의 크기에 따라 증가하는 경향을 나타내었다. 빔내에 트레이를 설치했을 때와 트레이를 제거했을때 표면선량의 변화와 전자오염정도를 관찰하였다. 전자오염을 감소시키기 위해서 구리 필터를 트레이 밑에 부착하여 그 효과를 분석하였다. 아울러 거리를 변화 시켜가며 선량의 변화를 관찰하여 최대의 피부보호효과를 유지할 수 있는 최적의 SSD와 TSD를 구하였다. 이런 모든 결과들은 방사선 치료 환자의 피부보호에 이용될 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.200-207
• /
• 2006

A new formal standardization methodology of the structural design document information is proposed in this paper. The standardization process is divided into three steps: pre-process of the collected sample document (CSD), construction of the document structure, and definition of the occurrence of each element in the document. During the pre-process, the detail document contents in the CSD are indexed with templates defined in this study, and the indexed CSD is translated into XML Schema (XSD) formal Afterwards the degree of confidences of all elements between the temporary standard document (TSD) and the translated CSD are calculated by using the XML schema matching algorithm; the TSD is then updated. This second step is repeated until all of the CSD are compared. In the final step, the common elements and unbounded elements are extracted by determining the occurrence of the temporary document elements, and the standardized document schema is exported in the XSD format. The case study dealing with the structural calculation documents show that the ,proposed methodology can be effectively used to build a XML -based information model of structural design documents.

• 약학회지
• /
• 제36권3호
• /
• pp.191-198
• /
• 1992

The abuse of zipeprol, an antitussive agent, is prevalent among young people. Ten fatal cases of zipeprol concentration in blood after its abuse had caused death are disscussed. GC equipped with TSD was used to quantify the drug in postmortem blood and GC/MS to identify the metabolites in urine after preliminary test. The calibration curve of zipeprol was linear (r = 0.998) and the recoveries of zipeprol 5, 10 and $20\;{\mu}g$ added to 1 ml postmortem blood were $97.2{\pm}3.9$, $92.5{\pm}3.9$ and $86.9{\pm}4.6%$ respectively. The blood zipeprol concentration varied 2.9 to $24.69\;{\mu}g/ml$ in 10 fatal cases. All the deaths were young adults with the age of 16-21. Three metabolites were identified in drug abuser's urine, 2-methoxy-2-phenyl ethylpiperazine, 2-hydroxy-3-methoxy-3-phenyl propylpiperazine and a demethylated zipeprol.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.75-83
• /
• 2005

확대형 채널 내의 정상 천음속 희박 예혼합 연소에 대해 점근해석을 이용하여 연구하였다. 이 모델은 근음속의 유동 속도와 일직선 채널로부터 벗어난 작은 형상변화 그리고 1단 1차 Arrhenius 화학 반응율에 의한 적은 열 방출 사이에서 일어나는 비선형 상호작용에 대하여 탐구하였다. 반응유체 유동은 연소 가스의 질량 분율을 계산하는 상미분 방정식과 연계된 비균질 천음속 미교란 방정식(TSD)을 사용하여 묘사하였다. 또한 점근해석으로부터 반응유체 유동 문제를 지배하는 상사 파라미터들을 유도하였다. 수치 결과들은 대류와 화학반응 그리고 형상효과 사이에 일어나는 복잡한 비선형 상호작용과 유동에 미치는 이것의 영향 등이 잘 나타나 있다.

• 여성건강간호학회지
• /
• 제11권4호
• /
• pp.316-323
• /
• 2005

Purpose: The purpose of this study was to explore the relationships among women's total symptom distress, uncertainty and quality of life in women with endometriosis. Method: A total of 121 women who had been diagnosed with endometriosis was given a questionnaire. Data was collected from August 2004 to January 2005. The data was analyzed by frequency, mean, t-test, ANOVA, Pearson correlation coefficient, and multiple linear regression analysis using SPSS WIN 10.0 software. Result: The mean score of TSD was 3.23. 'Menstrual cramping' showed the highest score. The mean score of uncertainty, and quality of life of the subject was 56.6, and 38.3 respectively. TSD was significantly related with coffee intake and uncertainty was significantly related with marital status, economic status, alcohol intake, diagnosis after period, and family history. Quality of life was significantly related with age, and dysmenorrhea. There were significant relationships between total symptom distress and uncertainty, and quality of life. There were significant relationship between uncertainty and quality of life. Conclusion: Endometriosis symptoms showed a significant relationship with uncertainty and quality of life. This study will help to manage women with endometriosis.