• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1484-1488
• /
• 2004

The thiocyanate-selective PVC membrane electrodes based on 5,10,15,20-tetrakis(2,4,6-trimethylphenyl)-porphyrinatomanganese(III) chloride [Mn(TMP)Cl] and 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinatomanganese(III) chloride $[Mn(Cl_8TPP)Cl]$ as ion carriers were investigated. The effect of ionophores, membrane compositions, plasticizers, and solution pHs on the response characteristics were studied. The Mn(TMP)Cl as an ionophore shows the best potentiometric sensitivity with a slope of -58.7 mV/decade and a detection limit of $log[SCN^-]$ = -6.90, and selectivity for thiocyanate over strong hydrophobic interfering anions such as ${ClO_4}^-$ and salicylate. The potentiometric response is affected by the electronic effect of the substituents and solution pHs. The presence of substituents with electron donating and more liphophilic characters around the ligated metal center produces an improved response toward $SCN^-$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1333-1338
• /
• 2013

Chitosan-based nanoparticles (CSNP) were prepared through ionic cross-linking and gelation of chitosan (CS) by tripolyphosphate (TPP). CS properties such as molecular weight, and preparation conditions were screened and the resulting nanoparticles were examined by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained particles were consistently spherical with an overall diameter of approximately $107{\pm}20$ nm. They were successfully used as a carrier for Zidovudine, an anti-human immunodeficiency virus (HIV) which, to our knowledge, is novel. The encapsulation ability, loading capacity, and controlled release behavior for these CSNP was evaluated. Results indicated that their intrinsic properties were strongly affected by properties inherent to CS such as molecular weight, and by the preparation condition, such as cross-linking density, which depends on the concentration of the cross-linker. In vitro release tests for the entrapped zidovudine showed that the CNNP provided a continuous release that can last upwards 20 h.

• Archives of Pharmacal Research
• /
• v.19 no.6
• /
• pp.435-440
• /
• 1996

The effect of benzalkonium chloride on skin permeability of partially modified antisense phosphorothioate oligonucleotides (PS-ODN), which are designed as scar formation inhibitor, was investigated using Franz Diffusion Cell. When the concentration ratio of PS-ODN-quarternary ammonium salt complex is more than 1:100, the apparent partition coefficient (APC) of each complex was increased in the following order; tetraphenyl phosphonium chloride (TPP) < cetyltrimethyl ammonium bromide(CTAB) < benzalkonium chloride (BZ). The permeability of PS-ODN through the rat skin increased in the presence of BZ. The fluxs of PS-ODN with BZ were increased by addition of Pluronic F 68 or Triton X-100 to phosphate buffered saline (PBS), respectively. When the mole ratio of PS-ODN to BZ is 1:10, the fluxs penetrated of PS-ODN with BZ was greatest. The increase of the permeability in the presence of BZ might be due to the formation of lipophilic ion-pair complex between PS-ODN and BZ. By regulation of mole ratio of PS-ODN to BZ, the development of topical dosage forms using PS-ODN as scar formation inhibitor will be possible with minimal systemic exposure.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.912-918
• /
• 2009

An optically active diacid containing the L-histidine moiety was prepared by reacting pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydride) 1 with L-histidine 2 in acetic acid, and was polymerized with several aromatic diamines 5a-g to obtain a new series of optically active poly(amide-imide)s (PAIs) using two different methods, such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$)/pyridine (Py) and direct polycondensation in a tosyl chloride (TsCl)/pyridine (Py)/N,N-dimethylformamide (DMF) system as a condensation agent. The resulting new polymers 6a-g with inherent viscosity was obtained in good yield. The polymers were readily soluble in polar organic solvents, such as N,N-dimethyacetamide (DMAc), N,N-dimethyformamide (DMF), and dimethyl sulfoxide (DMSO). The obtained polymers were characterized by FTIR, specific rotation, elemental analysis as well as $^1$H-NMR spectroscopy and gel permeation chromatography (GPC). The thermal stability of the resulting PAIs was evaluated with thermogravimetric analysis techniques under a nitrogen atmosphere.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• The Southeast Asian review
• /
• v.27 no.2
• /
• pp.273-295
• /
• 2017

The Philippines in 2016 showed the highest GDP growth rate among Southeast Asian countries, in spite of domestic and international turbulence caused by the war on drugs and unexpected foreign policies after Duterte's presidency. The social contexts and political dynamics behind 'Duterte phenomenon' have raised key questions and issues to other countries including Korea, as to democracy and politics in current neoliberal challenges. The Philippines' choices for independent foreign policy and challenges against existing hegemony would continue to draw attention, particularly on whether this would end in an experiment of a country or initiate an alternative power block among neighboring countries and ASEAN communities.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.739-745
• /
• 2009

N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g were synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1 with two equimolars of Lalanine 2a, L-valine 2b, L-leucine 2c, L-isoleucine 2d, L-phenyl alanine 2e, L-2-aminobutyric acid 2f and L-histidine 2g in an acetic acid solution. Seven new poly(amide-imide)s PAIs 5a-g were synthesized through the direct polycondensation reaction of seven chiral N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g with bis(3-amino phenyl) phenyl phosphine oxide 4 by two different methods: direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$/pyridine (py), and direct polycondensation in a tosyl chloride (TsCl)/pyridine (py)/N,N-dimethylformamide (DMF) system. The polymerization reaction produced a series of flame-retardant and thermally stable poly(amide-imide)s 5a-g with high yield. The resulted polymers were fully characterized by FTIR, $^1H$ NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Data obtained by thermal analysis (TGA and DTG) revealed that the good thermal stability of these polymers. These polymers can be potentially utilized in flame retardant thermoplastic materials.

• International Commerce and Information Review
• /
• v.19 no.3
• /
• pp.25-44
• /
• 2017

In 2017, the EU-Japan FTA talks were resumed ahead of the G20 summit in Brussels, Belgium, and agreed to abolish tariffs on 95% of all trade items. These figures are highly liberalized agreements that are equivalent to the Pacific Rim Economic Partnership Agreement (TPP). Particularly, Japanese automobiles were aggressively negotiating the abolition of tariffs with 7-year grace period and the gradual elimination of European cheese in 15 years. If the agreement is concluded, the tariffs of 1 billion euros (about 1.3 trillion won) will disappear, and Korea, which has similar industrial structure with Japan, will be hit by the processed food, chemical products, medical equipment, dairy products and automobile industries. do. The purpose of this study is to examine the mutual recognition agreement (MRA) that can directly affect the Korean companies in the content of the Japan-EU FTA and to suggest the implications for the Korean export companies.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.462-471
• /
• 2017

Thiamine pyrophosphate (TPP), the active form of thiamine is a cofactor for enzymes involved in central metabolism pathways. However, it is also known to have a role as a stress signaling molecule in response to environmental changes. Anabaena sp. and N. oculata are microorganisms which are abundantly found in Malaysia's freshwater and marine ecosystem. However, not much studies have been done especially in regards to thiamine biosynthesis. This work aimed to amplify of gene transcripts coding for thiamine biosynthesis enzymes besides looking at the expression of thiamine biosynthesis genes upon stress application. Various stress inducers were applied to the cultures and RNA was extracted at different time points. The first two genes, ThiC and ThiG/Thi4 encoding enzymes of the pyrimidine and thiazole branch respectively in the thiamine biosynthesis pathway were identified and amplified. The expression of the genes were analysed via RT-PCR and the intensity of bands were analysed using ImageJ software. The results showed up to 4-fold increase in the expression of ThiC and ThiG gene transcript as compared to control sample in Anabaena sp. ThiC gene in N. oculata showed an expression of 6-fold higher as compared to control sample. In conclusion, stresses induced the expression of the gene coding for one of the most important enzymes in thiamine biosynthesis pathway. This is an agreement with the hypothesis that overexpression of thiamine is crucial in assisting plants to combat abiotic stresses.