• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.496-499
• /
• 1995

Amorphous $Co_{80+x}TM_{12}B_{8-x}$ (TM = Ti, Zr, Hf, Nb and x = 0, 2, 4 at%) alloys were prepared by single roll melt spinning technique. Saturation magnetization of the amorphous ribbons was measured by SQUID and vibrating sample magnetometer from 5 to 800 K under applied fields up to 10 kOe. Typical thermo-magnetization curves were observed and the average values of the spectroscopic splitting g factor were estimated from the ferromagnetic resonance curve. For all the amorphous alloys studied here the saturation magnetization in the temperature range 5 K up to about $0.3T_{c}$ can be described by the Bloch relation: $M_{s}(T)\;=\;M_{s}(0)(1-BT^{3/2}-CT^{5/2})$. From the values of $M_{s}(0)$, B and spectroscopic splitting g factor the spin wave stiffness constants were calculated.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.79-94
• /
• 1986

TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.420-429
• /
• 2007

The purpose of this study was to compare the micro ensile bond strength to bovine dentin of several adhesives (SM, Scotch $Bond^{TM}$ Multipurpose; SB, $Adper^{TM}$ Single Bond 2; SE, $Clearfil^{(R)}$ SE Bond; AQ, AQ $Bond^{TM}$; TS, $Clearfil^{(R)}$ tri-S Bond). Except SM and SB, they have a simplified one- or two-step application protocols in compare with the dentin adhesives conventional three-step protocols. For the microtensile bond strength test, the labial surfaces of bovine incisors were used. Following exposure of dentin layer, according to their manufacturer's directions, each dentin adhesives were applied and composite resin blocks were constructed. The teeth were sectioned for specimen and tested microtensile bond strength. Also observed the fracture mode of interface. The obtained results were as follows : 1. The microtensile bond strength values ranged from 51.34 to 24.04 MPa on dentin(in decreasing order, SE, SM, SB, AQ and TS). 2. The highest microtensile bond strength was by SE and SM on bovine dentin, and the lowest by AQ and TS. 3. SM, SB and SE showed cohesive failures and adhesive failure but AQ, TS presented almost adhesive failures. In summary, microtensile bond strengths of single-step adhesives (AQ and TS) on bovine dentin were significantly lower than those of multi-step adhesives (SM, SB and SE) (p<0.05).

• Journal of Environmental Impact Assessment
• /
• v.7 no.1
• /
• pp.81-91
• /
• 1998

The objective of this study was to use remotely sensed data, combined with in situ data, for the assessment of trophic state for Daecheong reservoir. Three Landsat TM(Thematic Mapper) imagery data were processed to portray trophic state conditions. The remotely sensed data and the measured data were obtained on 20 June 1995. Regression models have been developed between the chlorophyll-a concentration and reflectance which was converted to Landsat TM digital data. The regression model was determined based on the correlation coefficient which was higher than 0.7 and was applied to the entire study area to generate a distribution map of chlorophyll-a and trophic state. The equation, providing estimates of chlorophyll-a concentration, represented the year-to-year spatial variation of trophic zones in the reservoir. Satellite remote sensing data derived from Landsat TM had been successfully used for trophic slate mapping in Daecheong reservoir.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.63-70
• /
• 2017

The purpose of this study was to evaluate the effects of oral health education feedback using $Qraycam^{TM}$. The middle school students 118 were divided into intervention group (59) and control group (59) subjects evaluated the dental plaque score using $Qraycam^{TM}$ after oral health education at baseline. Then, the $Qraycam^{TM}$ images view only sent to students and parents of the intervention group by text message. After 4 weeks both intervention group and control group were evaluated dental plaque by $Qraycam^{TM}$ re-taking. Then, they filled out the questionnaire. Both ${\Delta}R$ value and SPS(Simple Plaque Score) were statistically significant reduced in groups performed feedback(p<0.001). The oral health behavior, toothbrushing of intervention group was significantly higher compared to the control group(p<0.001). Also the importance of oral health was significantly higher in the intervention group compared to the control group(p<0.001). The effect of dental plaque reducing, toothbrushing time and subjective oral health importance were higher in the intervention group who received feedback using $Qraycam^{TM}$ image. Therefore it was expected to be able to utilize $Qraycam^{TM}$ image as a visual feedback tool of oral health education.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.224-232
• /
• 2006

This study investigates to detect Sea Surface Temperature (SST) and land cover change after tide embankment construction using Landsat Thematic Mapper (TM) Thermal Infrared (TIR) band data at Shihwa Lake and surrounding area. SST measurement is important for studies of both the structure of the ocean and as the thermal boundary between the ocean and the atmosphere. Since 1970s, the derivation of SST by satellite remote sensing (RS) has been applied to earth surface using Advanced Very High Resolution Radiometer (AVHRR) and Landsat TM. However, AVHRR has restriction in deriving SST in the area whose shoreline is complicated like western coast in South Korea because of coarse spatial resolution. The TIR band of TM images can be used to detect SST change whose shoreline is complicated and narrow like the study site. Thus, multi-temporal TM images were used for SST change detection in this study.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.105-110
• /
• 2007

Objective : This purpose of this study was to determine the clinical efficiency and applicability, and to analyze the radiologic findings of the anterior cervical approach using two synthetic cages for interbody fusion. Methods : A total of 41 patients with cervical diseases underwent anterior discectomy and interbody fusion with the PEEK $Solis^{TM}$ cage in 21 patients and the carbon composite $Osta-Pek^{TM}$ cage in 20 patients. Outcome assessment was done using Odom's criteria. Radiological assessment was performed with respect to subsidence, bony fusion and lordosis. The mean follow-up period was 13 months. Results : There were 34 [92.9%] successful cases. The average height of the disc space 12 months after surgery compared the height just after surgery was decreased over 3mm in 4 cases, indicating severe subsidence. The use of these synthetic cages have provided the increase in postoperative cervical lordosis. Conclusion : There were no significant differences between the $Solis^{TM}$ and $Osta-Pek^{TM}$ cages on clinical and radiologic outcomes. Both $Solis^{TM}$ and $Osta-Pek^{TM}$ cages showed low subsidences and complications associated with hardware with good clinical outcomes, high fusion rates, restored disc heights, and restored cervical lordosis.

• The Journal of Pediatrics of Korean Medicine
• /
• v.28 no.3
• /
• pp.85-101
• /
• 2014

Objectives The purpose of this study is to report test results in eight tic disorder children using Sensitiv $Imago^{TM}$. Methods Eight tic disorder children were tested using Sensitiv $Imago^{TM}$. Also, they were diagnosed with tic disorders by DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, $4^{th}$ edition) and we evaluated tic disorder cases by Yale Global Tic Severity Scale (YGTSS). Results In 8 cases, 1 case was transient tic disorder, 3 cases were Tourette's disorder and 4 cases were unspecified tic disorder. In the result of Sensitiv $Imago^{TM}$, 4 cases showed the lowest score at filter ${\sharp}5^*$ and 4 cases showed the lowest score at filter ${\sharp}6^*$ in [Express Monitoring] of [Review of System Disorders of Homeostasis]. Filter #5 includes urogenital organs, liver, gallbladder, kidneys, urinary bladder and ureter and Filter #6 stands for organs of immune and respiratory systems. Conclusion We report test results in eight tic disorder children using Sensitiv $Imago^{TM}$. Further studies about the principle, repeatability, reproducibility of Sensitiv $Imago^{TM}$ are needed.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.119-125
• /
• 2016

The present study aimed to understand the effects of a ${\beta}$-glucan-added abalone feed (Immuneglu$^{TM}$) on the immune parameters, survival rate, and anti-bacterial activity of the abalone Nordotis discus hannai. During the study, spat and adult abalones were fed 0, 0.1, and 1% of Immuneglu$^{TM}$ mixed with artificial feed for 2 weeks, and their immune parameters, survival rate, and anti-bacterial activity were measured. The results showed that abalones fed on Immuneglu$^{TM}$-added feed showed a higher phagocytic rate, survival rate, and anti-bacterial activity against Vibrio alginolyticus, than those with the control treatment. In addition, the nitric oxide concentration, which indicates an inflammatory response, increased in the treatment group. Our study suggests that Immuneglu$^{TM}$ might be a useful additive for increasing the immunity and survival rates of abalones during mass culture.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.21-32
• /
• 2023

The design of complex man-made systems mostly involves a conceptual modeling phase; therefore, it is important to ensure an appropriate analysis method for these models. A key concept for such analysis is the development of a diagramming technique (e.g., UML) because diagrams can describe entities and processes and emphasize important aspects of the systems being described. The analysis also includes an examination of ontological concepts such as states and events, which are used as a basis for the modeling process. Studying fundamental concepts allows us to understand more deeply the relationship between these concepts and modeling frameworks. In this paper, we critically analyze the classic definition of a state utilizing the Thinging machine (TM) model. States in state machine diagrams are considered the appropriate basis for modeling system behavioral aspects. Despite its wide application in hardware design, the integration of a state machine model into a software system's modeling requirements increased the difficulty of graphical representation (e.g., integration between structural and behavioral diagrams). To understand such a problem, in this paper, we project (create an equivalent representation of) states in TM machines. As a case study, we re-modeled a state machine of an assembly line system in a TM. Additionally, we added possible triggers (transitions) of the given states to the TM representation. The outcome is a complicated picture of assembly line behavior. Therefore, as an alternative solution, we re-modeled the assembly line based solely on the TM. This new model presents a clear contrast between state-based modeling of assembly line behavior and the TM approach. The TM modeling seems more systematic than its counterpart, the state machine, and its notions are well defined. In a TM, states are just compound events. A model of a more complex system than the one in the assembly line has strengthened such a conclusion.