• Journal of Plant Biotechnology
• /
• 제31권1호
• /
• pp.61-65
• /
• 2004

본 실험은 Alocasia cadieri Chantrier를 기내배양하여 일시에 균일한 식물체를 대량생산하기 위하여 실시하였다. Alocasia의 경정을 TDZ 0.1mg/L가 첨가된 배지에 배양하였을 때 신초증식이 가장 높았으며, 형성된 신초에서 신초의 증식은 TDZ과 NAA가 각각 0.5mg/L첨가된 배지에서 효과적이었다. 형성된 신초의 발근은 IBA또는 NAA가 첨가된 배지보다는 활성탄 2.0g/L가 첨가된 배지에서 양호하였으며, 소식물체의 순화는 perlite : vermiculite가 1:1로 혼합된 용토 또는 vermiculite가 적합하였다.

• Journal of Acupuncture Research
• /
• 제22권5호
• /
• pp.49-55
• /
• 2005

Objectives : In order to ensure safe Herbal Acupuncture treatment, the quality of needle tip is much important. Therefore we investigated micromorphological characteristics of Herbal Acupuncture needle tip according to the number of injection. Methods : We have selected the 26 Gage syringes & 29 Gage syringes that using currently in Herbal Acupuncture treatment. And we evaluated the change of shape of Herbal Acupuncture needle tip after several times of injection by Inverted System Microscope(x 200). Results & Conclusion : We found at Herbal Acupuncture needle tips had several defects such as hooked, scuffed, lump and irregular, stubbed or malformed shape in spite of new syringes. And we found at Herbal Acupuncture needle tips had several defects that is harmful to body such as mild pain, possibility of damage of tissue after several times of injection. Therefore it is necessary to pay attention to use Herbal Acupuncture needle tips.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.202-208
• /
• 2003

This study carried out a cutting experiment on Duralumin A16061-76, which is light but strong and highly anticorrosive, so recently popular as a lightweight material, by changing cutting conditions and alternating 4 insert tips, and examined the effect of each insert tip on cutting force at certain cutting conditions, the measurements of the coarseness of processed surfaces roughness, and the chip workability. The 1311owing conclusions were drawn from the results. Cutting force for cutting tool is when insert tips were alternated at each cutting condition, the cutting force of cutting tools was highest then CBN tools were use(1 next by Ceramic tools, Cermet tools, and WC tools. Therefore, WC tools are considered most suitable for cutting Duralumin A16061-T6. Surface roughness as for the coarseness of surfaces according to insert tips applied to Duralumin A16061-T6 under the cutting condition of depth of cut below 1mm, feed rate below 0.24mm/rev and cutting speed over 100m/min the coarseness of material surface roghness appeared to be finest when WC tools were used, next by Ceramic tools, Cermet tools, and CBN tools.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2002년도 제9차 국제심포지움 및 추계정기학술발표회
• /
• pp.53-53
• /
• 2002

Shoot tips of in vitro propagated plantlets were cryopreserved using encapsulation/dehydration procedures. Shoot tips were excised under filter sterilized antioxidants solution (0.2M phosphate buffer, pH 5.7 supplemented with 5g/1 ascorbic acid and 15g/1 sodium borate). They were drawn up into a sterile 10 $\textrm{cm}^3$disposable pipette and were dropped into the culture medium with 2.5w/v Na-alginate, then into 100mM CaCl$_2$.2$H_2O$. Encapsulated shoot tips were transferred into 10㎤ of liquid culture medium with a range of sucrose concentrations (0.25-1.0M) and were incubated in dark for 24 hours in 18C at 40rpm. Beads were then dehydrated in silica gel for different time intervals (1-24 hours). Then they were freeze dried either rapidly (plunge directly into liquid N2 or in two stages (samples were kept at 20C for 10 minutes, then reduced to 35C at 1C per minute. Then, plunge into liquid $N_2$). The influence of sucrose and silica gel pre-treatment on pre- and post-freeze shoot growth was examined.(중략)

• 식물조직배양학회지
• /
• 제22권2호
• /
• pp.101-104
• /
• 1995

작약동아의 정아 및 액아의 기내배양에 의한 유묘의 증식에 필요한 배양조건을 구명코자 실험한 결과는 다음과 같다. 정아배양의 경우, 생장조절재의 조성에 무관하게 두지방종에서 100% 신초가 신장하였으나 생장은 의성지방종 은 NAA 0.1 mg/L 단용배지, 영천지방종은 NAA 0.01 mg/L 단용배지에서 가장 양호하였다. 액아배양의 경우, NAA 0.01 mg/L와 zeatin 5.0 mg/L 혼용배지에서 의성지방종은 100%, 영천지방종은 50%의 가장 높은 신초신장율을 보였고 신초의 생장도 양호한 경향이었다. 정아 및 액아배양으로부터 유도된 신초는 vermiculite를 지지물로 한 NAA 0.1 mg/L 첨가배지에서 30.0%의 발근율을 보였으나 뿌리의 생장은 양호하였다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.306-312
• /
• 2011

In this study, we are crystallized to the low density polyethylene (LDPE) micro-particles in $n$-dodecanol solution by thermally induced phase separation(TIPS) method. The Low density polyethylene micro-particles is used in a wide variety of polymer coatings and industrial application. The utility of that for a particular application depends on a number of factors such as the particle size and distribution, and chemical composition of the materials. However, there are still needs for new methods of preparation which will provide the structure with unique sizes. The widely used processes for micro-size particles are crystallization method and thermally induced phase separation. TIPS process based on the phase separation mechanism was performed for the LDPE system which undergoes liquid-solid phase separation. Effects of various operating parameters were examined on the structure variation of the particles. Professionality, take-up speed and crystallization rate depended on temperature and concentration of polymer in solution.

• The Plant Pathology Journal
• /
• 제29권1호
• /
• pp.59-66
• /
• 2013

Colonization studies previously performed with a green-fluorescent-protein, GFP, labeled derivative of Bacillus amyloliquefaciens FZB42 revealed that the bacterium behaved different in colonizing surfaces of plant roots of different species (Fan et al., 2012). In order to extend these studies and to elucidate which genes are crucial for root colonization, we applied targeted mutant strains to Arabidopsis seedlings. The fates of root colonization in mutant strains impaired in synthesis of alternative sigma factors, non-ribosomal synthesis of lipopeptides and polyketides, biofilm formation, swarming motility, and plant growth promoting activity were analyzed by confocal laser scanning microscopy. Whilst the wild-type strain heavily colonized surfaces of root tips and lateral roots, the mutant strains were impaired in their ability to colonize root tips and most of them were unable to colonize lateral roots. Ability to colonize plant roots is not only dependent on the ability to form biofilms or swarming motility. Six mutants, deficient in abrB-, sigH-, sigD-, nrfA-, yusV and RBAM017410, but not affected in biofilm formation, displayed significantly reduced root colonization. The nrfA- and yusV-mutant strains colonized border cells and, partly, root surfaces but did not colonize root tips or lateral roots.

• Journal of Plant Biotechnology
• /
• 제7권3호
• /
• pp.175-181
• /
• 2005

This work described some essential factors necessary for micro-propagation of banana for mass production of synthetic seeds for germ plasm conservation, and how peroxides activity of conserved tissue was influenced. Shoot tips of field grown plants were used to obtain shoot clusters on shoot proliferation medium (MS medium supplemented with 5 mg/l BAP). Using longitudinally-split shoot tip technique, 18720, 8640, 7488, 2016 plantlets were obtained from one shoot tip of Maghraby, Grand Naine, Balady, and Williams, respectively, in six subculture, one month each, on solid medium. Shoot tips excised from in vitro grown plantlets were encapsulated in calcium-alginate beads and stored at $4^{\circ}C$ for one month on half-strength MS basal medium without growth regulators or sugars. After one month all the viable-conserved synseeds formed shoots when they were transferred to MS basal medium, some of them showed synchronous formation of shoot and root systems in one week. Plants retrieved from encapsulated shoot tips were hardened off and transferred to soil.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.335-340
• /
• 2008

In this study, novel structured thin ultrasonic rotary motor has been proposed. Ultrasonic motors are based on an elliptical motion on the surface of elastic body. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on upper side and bottom side of the brass plate. From the thin stator, elliptical displacements of the four contact tips were obtained. To find the optimal size of the stator, motions of the motors were simulated using ATILA by changing length, width and thickness of the ceramics. The stators had commonly three resonance peaks and contact tips of the stator moved on tangential or normal trajectories at these resonance peaks. The maximum displacements at the resonance peaks were compared. As results, maximum displacements of the contact tips were obtained at the length of 16 mm, width of 6 mm and thickness of 0.4 mm. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. The motor was fabricated by using the designed stator. And, the characteristics of the motor were compared with the simulated results. When the motor was fabricated with these results, speed fo 935 rpm was obtained by input voltage of 25 Vrms at 93.5 kHz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.473-473
• /
• 2011

In recent years, organic thin film transistors OTFTs based on conductive-conjugated molecules have received significant attention. We report a fabrication of organic single crystal nanowires that made on Si substrates by liquid bridge-mediated nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the organic single crystal nanowire and the Si substrate. Pentacene is the most promising organic semiconductors. However pentacene has insolubility in organic solvents so pentacene OTFTs can be achieved with vacuum evaporation system. However 6, 13-bis (triisopropylsilylethynyl) (TIPS) pentacene has high solubility in organic solvent that reported by Anthony et al. Furthermore, the substituted rings in TIPS-pentacene interrupt the herringbone packing, which leads to cofacial ${\pi}-{\pi}$ stacking. The patterned TIPS-Pentacene single crystal nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrical properties.