Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design of Thin Type Ultrasonic Motor

박형 초음파모터의 최적 설계

  • Published : 2008.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, novel structured thin ultrasonic rotary motor has been proposed. Ultrasonic motors are based on an elliptical motion on the surface of elastic body. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on upper side and bottom side of the brass plate. From the thin stator, elliptical displacements of the four contact tips were obtained. To find the optimal size of the stator, motions of the motors were simulated using ATILA by changing length, width and thickness of the ceramics. The stators had commonly three resonance peaks and contact tips of the stator moved on tangential or normal trajectories at these resonance peaks. The maximum displacements at the resonance peaks were compared. As results, maximum displacements of the contact tips were obtained at the length of 16 mm, width of 6 mm and thickness of 0.4 mm. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. The motor was fabricated by using the designed stator. And, the characteristics of the motor were compared with the simulated results. When the motor was fabricated with these results, speed fo 935 rpm was obtained by input voltage of 25 Vrms at 93.5 kHz.

Keywords

References

  1. S. Ueha, Y. Tomikawa, M. Kuroaswa, and N. Nakamura, "Ultrasonic Motors Theory and Applications", OXFORD, p. 4, 1993
  2. T. Sashida, "Trial construction and operation of an ultrasonic vibration driven motor", Jpn. J. Appl. Phys., Vol. 51, p. 713, 1982
  3. Y. Tomikawa, T. Takano, and H. Umeda, "Thin rotary and linear ultrasonic motors using a double-mode piezoelectric vibrator of the first longitudinal and second bending modes", Jpn, J. Appl. Phys., Vol. 30, p. 3073, 1992
  4. T. Kosawada, K. Suzuki, and T. Tomikawa, "A card sending linear ultrasonic motor using multi-beam piezoeletric vibrators", International Journal of Applied Electromagnetics in Materials, Vol. 2, No. 4, p. 285, 1992
  5. H. H. Chong, T. G. Park, and M. H. Kim, "A study on driving characteristics of the cross thpe ultrasonic rotary motor", Journal of Electroceramics, Vol. 17, p. 561, 2006 https://doi.org/10.1007/s10832-006-5414-5
  6. M. bexell and S. Jogansson, "Microassembly of a piezoelectric miniature motor", Journal of electroceramics, Vol. 3:1, p. 73, 1999
  7. 박태곤, 김명호, "압전세라믹 리니어 모타의 동작원리와 응용", 전기전자재료, 14권, 4호, p. 8, 2001
  8. T. G. Park, B. J. Kim, M. H. Kim, and K. Uchino, "Characteristics of the first longitudinal-fourth bending mode linear ultrasonic motors", Jpn, J. Appl. Phys., Vol. 41, p. 7139, 2002 https://doi.org/10.1143/JJAP.41.7139
  9. H. W. Kim, S. Dong, P. Laoratanakul, K. Uchino, and T. G. Park, "Novel method for driving the ultrasonic motor", IEEE, Vol. 49, No. 10, p. 1356, 2002
  10. 정현호, 박태곤, "스테이터의 재질에 따른 Cross형 초음파 회전모터의 구동특성", 전기전자재료학회논문지, 18권, 10호, p. 891, 2005 https://doi.org/10.4313/JKEM.2005.18.10.891