• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.45-52
• /
• 2022

Because discontinuity in the rock mass and contact of soil-structure interaction exhibits coupled thermal-hydromechanical (THM) behavior, it is necessary to develop an interface element based on the full governing equations. In this study, we derive force equilibrium, fluid continuity, and energy equilibrium equations for the interface element. Additionally, we present a stiffness matrix of the elastoplastic mechanical model for the interface element. The developed interface element uses six nodes for displacement and four nodes for water pressure and temperature in a two-dimensional analysis. The fully coupled THM analysis for fluid injection into a fault can model the complicated evolution of injection pressure due to decreasing effective stress in the fault and thermal contraction of the surrounding rock mass. However, the result of hydromechanical analysis ignoring thermal phenomena overestimates hydromechanical variables.

• Journal of Technology Innovation
• /
• v.31 no.2
• /
• pp.29-58
• /
• 2023

The knowledge and technological competitiveness produced by universities determines a country's scientific technology and industrial competitiveness. The aim of this study is to find the evolution of Triple Helix Model (THM) by analyzing cases of technological catching-up and nurturing the human capital policies during Korea industrialization era, from 1960 to 2020. To fulfill the aims, this study utilized qualitative methodologies. In this study not only the process of acquiring technologies and core technologies but also the system for nurturing the human capital focused on scientific and engineers was analyzed. In addition characteristics of each ear of Triple Helix Model (THM) were examined. From the results, this study suggests Triple Helix Syncro-Scenario (THSS) which is the compelling innovation model, based on scenario, combined the personal experiences various critical thoughts and problems with enterprises and government for creating the incessment innovations.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.27-34
• /
• 2006

This study was conducted to evaluate the performance of a membrane bioreactor filled with high concentration of powdered activated carbon (HCPAC-MBR) to reduce DBPs at the drinking water treatment. The pilot system was installed after the rapid sand filtration process whose plant was the conventional treatment process. The removal efficiencies of DBPs were measured during pilot operation period of 2 years. HAA and THM removal rates could be maintained around 80~90% without any troubles and then tremendous reduction of HAA and THM reactivity were observed more than 52%. The average removal rate of HAA formation potential (FP) and THM formation potential (FP) were 70.5% and 67.6% respectively. It is clear that the PAC membrane bioreactor is highly applicable for advanced water treatment to control DBPs.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.1
• /
• pp.121-130
• /
• 1996

Adsorption isotherms of three trihalomethanes(THMs: $CHCl_3$, $CHBrCl_2$ and $CHBr_2Cl$) and the other organics(p-chlorophenol and sucrose)on activated carbon fibers(ACFs) were measured. Adsorption capacities of the ACFs for these THMs were found to be comparable with or slightly larger than those of granular activated car bons(GACs) which have been widely used for trihalomethanes control in drinking water. Also, the breakthrough curve prediction was successfully carried out using a mathematical model on basis of the assumption that the adsorption equilibrium is instantaneously established when a THM solution contacts the ACF. In practice, THM removal from drinking water was investigated at water works using benchscale ACF adsorptJOn columns. The volume of water treated at a space velocity(SV) of about $100h^{-1}$ was approximately 40 l/g-ACF. The practical adsorption capacities of PCP and sucrose in column adsorption were in good agreement with those of theoretically calculated results using the batch adsorption measurments. And the saturation time model of these substrates in the columns was also agreed succesfully with practical measurments.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.51.2-51.2
• /
• 2010

A novel approach of Poisson cluster stochastic rainfall generator was validated in its ability to reproduce important rainfall and watershed response characteristics at 104 locations of the United States. The suggested novel approach - The Hybrid Model(THM), as compared to the traditional ones, has an additional function to account for the year-to-year variability of rainfall statistics. The two-sample Kolmogorov-Smirnov test was used to see how well THM and traditional approach of Poisson cluster rainfall model reproduce the distribution of the following hydrologic variables: monthly maximum rainfall depths with 1, 3, 6, 12, and 24 hour duration, monthly maximum flow peaks at the virtual watersheds with Curve Number of 50, 60, 70, 80 and 90; and monthly runoff depths at the same virtual watersheds. In all of the testing variables, THM significantly outperformed the traditional approach. This result indicates that the year-to-year variability of rainfall statistics contains important information about the characteristics of rainfall processes that were not considered by the conventional approach of Poisson cluster rainfall modeling and that further considering it in rainfall simulation will enhance the performance of the rainfall models.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.264-273
• /
• 1997

Anodic oxidation reaction was applied to remove trihalomethanes in an aqueous solution. Each component was determined by using solid phase microextraction(SPME) fiber and GC-ECD. Anodic and cathodic compartments were separated in order to protect contaminants and connected by $KNO_3$-agar bridge. The calibration graphs of the 6 THM components were shown good linearlity from a few ppb up to a few hundreds ppb concentration level. Anodes such as platinum(Pt), titanium(Ti). zircornium(Zr), titanium metal coated with iridium(Ti-Ir), and glassy carbon coated with mixed valence ruthenium(mv Ru) were tried to remove the THMs at different potentials. The best result was obtained on the Ti-Ir anode applied 9 volts DC. The electrode could effectively remove almost all the THM components from the stirring solution within about 1.5 hours. The glassy carbon electrode coated with mixed valence ruthenium showed excellent removing effect at the begining, but the maximum removing level was remained at 60% probably due to the destruction of the electrode surface. The concentration of chloroform, however, tends to be increased due to the electrode reaction producing the component at the condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1035-1042
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. At S and B Water Treatment Plant, GAC is used in place of granular media in conventional rapid filters(GAC Filter-Adsorber) for removal of Disinfection By-products(DBPs). The primary focus of this study is on the performance of existing filter-adsorber, and their operation. It was found that F/A process removed turbidity as effective as sand system. The ratio of Hydrophobic DOM (HPO) and hydrophilic DOM (HPI) fraction in the raw water at S and B WTP was similar. Filter Adsorber presented earlier DOC breakthrough and steady state condition which was contributed by biodegradation during operation period. The removal efficiency of DBPs were used to evaluate the filter performance. The DBPs concentration of F/A treated water was below treatment goal level (THM < $80\;{\mu}g/L$, HAA < $60{\mu}g/L$). The removal efficiency of THM decreased rapidly during operation period. However, HAA were removed steadily regardless of the influent concentration of HAA. These results indicate that the removal of THM depend upon the adsorption mechanism while the removal of HAA depend upon biodegradation as well as adsorption. The decrease of adsorption capacity and characteristic value of GAC may be attributed to the effect of high organic loading, residual free chlorine, coagulants, manganese oxidants and frequently backwashing. This study has confirmed that Filter adsorber process can be considered as effective alternatives for the removal of DBPs, especially HAA.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.706-714
• /
• 2007

This study suggested a method for prediction of residual chlorine and THMs in water distribution system by measurement of residual chlorine, THMs, and other parameters, estimation of chlorine decay coefficients and THM formation coefficients, and simulation of water qualities using pipe network analysis. Bulk decay coefficients of parallel first-order were obtained by bottle tests, and pipe wall decay coefficients of first-order were estimated through evaluation of 5 models, which showed the lowest values of 0.03 for MAE(mean absolute error) and 0.037 MAE in comparison with the observed in field. And bottle tests were conducted to model first-order reaction of THM formation by nonlinear least square regression and the resultant coefficients were compared with the observed in field. As a result, the coefficients of determination$(R^2)$ for the observed and the predicted values were 0.98 in September and 0.82 in November, and the formation of THMs was predicted by modeling.

• Annual Conference on Human and Language Technology
• /
• 2003.10d
• /
• pp.137-141
• /
• 2003

본고에서는 동사 '주다'의 논항에 대해 논항의 배열 순서와 논항의 실현 양상을 살펴보고, 이를 바탕으로 논항을 추정하는 원리를 도출하는 것을 목적으로 한다. '주다' 동사의 경우 요구되는 세 개의 논항 중 두 개의 논항이 실현되는 경우가 가장 많으며, 논항이 생략되는 경향은 GOL>AGT>THM 순이다. 논항들 간의 배열에는 지배적인 순서가 있는데, 대개의 경우 [AGT-GOL-THM]의 순서를 따른다. 모든 논항을 추정하기 어려운 경우는 사실 많지 않으며 논항들간의 배열 순서와 실현 양상을 고려하면 기준이 되는 표지를 바탕으로 논항을 추정할 수 있다. 논항 추정 원리는 구문 분석에 있어서 어순 변이와 논항 생략을 처리는 근거를 마련할 수 있을 것이다.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.175-184
• /
• 2008

In this study, state-of-the-art of $CO_2$ geological sequestration as a method of greenhouse gas reduction was reviewed. Thermal-Hydraulic-Mechanically(THM) coupled simulation technology and its application to a stability analysis of geological formation due to $CO_2$ injection as well as a leakage path analysis were investigated and introduced.