• Journal of Information Display
• /
• v.6 no.1
• /
• pp.17-21
• /
• 2005

We explored a new way of designing dynamic logic gates with low temperature polysilicon thin film transistors to increase the speed. The proposed architecture of logic gates utilizes the structural advantage of smaller junction capacitance of thin film transistors. This method effectively blocks leakage of current through the thin film transistors. Furthermore, the number of transistors used in logic gates is reduced thereby reducing power consumption and chip area. Through HSPICE .simulation, it is confirmed that the circuit speed is also improved in all logic gates designed.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.103-105
• /
• 2015

Effect of silicon doping into ZnSnO systems was investigated using solution process. Addition of silicon was used to suppress oxygen vacancy generation. The transfer characteristics of the device showed threshold voltage shift toward the positive direction with increasing Si content due to the high binding energy of silicon atoms with oxygen. As a result, the carrier concentration was decreased with increasing Si content.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.1
• /
• pp.1-11
• /
• 1999

Hyrdogenated amorphous silicon thin film transistors are used as a pixel switching device of TFT-LCDs and very active research works on a-Si:H TFTs are in progress. Further development of the technology based on a-Si:H TFTs depends on the increased understanding of the device physics and the ability to accurately simulate the characteristics of them. A two-dimensional device simulator based on the realistic and flexible physical models can guide the device designs and their optimizations. A non-uniform finite-difference TFT Simulation Program, TFT2DS has been developed to solve the electronic transport equations for a-Si:H TFTs. In TFT2DS, many of the simplifying assumptions are removed. The developed simulator was used to calculate the transfer and output characteristics of a-Si:H TFTs. The measured data were compared with the simulated ones for verifying the validity of TFT2DS. Also the transient behaviors of a-Si:H TFTs were calculated even if the values of the related parameters are not accurately specified.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3299-3302
• /
• 2014

The In2S3 thin films of tetragonal structure and In2O3 films of cubic structure were synthesized by a spin coating method from the organometallic compound precursor triethylammonium indium thioacetate ($[(Et)_3NH]^+[In(SCOCH_3)_4]^-$; TEA-InTAA). In order to determine the electron mobility of the spin-coated TEA-InTAA films, thin film transistors (TFTs) with an inverted structure using a gate dielectric of thermal oxide ($SiO_2$) was fabricated. These devices exhibited n-channel TFT characteristics with a field-effect electron mobility of $10.1cm^2V^{-1}s^{-1}$ at a curing temperature of $500^{\circ}C$, indicating that the semiconducting thin film material is applicable for use in low-cost, solution-processed printable electronics.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.129-129
• /
• 2003

최근에 능동 영역 액정 표시 소자(Active Matrix Liquid Crystal Display, AMLCD)에서 고해상도와 빠른 응답속도를 요구하게 되면서부터 다결정 실리콘(poly-Si) 박막 트랜지스터(Thin Film Transistor, TFT)가 쓰이게 되었다. 그리고 일반적으로 디스플레이의 기판을 상대적으로 저가의 유리를 사용하기 때문에 저온 공정이 필수적이다. 따라서 새로운 저온 결정화 방법과 부가적으로 최근 디스플레이 개발 동향 중 하나인 대화면에 적용 가능한 공정인 금속유도 결정화 (Silicide Mediated Crystallization, SMC)가 연구되고 있다. 이 소자는 top-gated coplanar구조로 설계되었다. (그림 1)(100) 실리콘 웨이퍼위에 3000$\AA$의 열산화막을 올리고, LPCVD로 55$0^{\circ}C$에서 비정질 실리콘(a-Si:H) 박막을 550$\AA$ 증착 시켰다. 그리고 시편은 SMC 방법으로 결정화 시켜 TEM(Transmission Electron Microscopy)으로 SMC 다결정 실리콘을 분석하였다. 그 위에 TFT의 게이트 산화막을 열산화막 만큼 우수한 TEOS(Tetraethoxysilane)소스로 사용하여 실리콘 산화막을 1000$\AA$ 형성하였고 게이트는 3000$\AA$ 두께로 몰리브덴을 스퍼터링을 통하여 형성하였다. 이 다결정 실리콘은 3$\times$10^15 cm^-2의 보론(B)을 도핑시켰다. 채널, 소스, 드래인을 정의하기 위해 플라즈마 식각이 이루어 졌으며, 실리콘 산화막과 실리콘 질화막으로 passivation하고, 알루미늄으로 전극을 형성하였다 그리고 마지막에 TFT의 출력특성과 전이특성을 측정함으로써 threshold voltage, the subthreshold slope 와 the field effect mobility를 계산하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.205-207
• /
• 2008

The new process for hybrid silicon thin film transistor (TFT) using DPSS laser has been developed for realizing both low-temperature poly-Si (LTPS) TFT and a-Si:H TFT on the same substrate as a backplane of active matrix liquid crystal display. LTPS TFTs are integrated on the peripheral area of the panel for gate driver integrated circuit and a-Si:H TFTs are used as a switching device for pixel in the active area. The technology has been developed based on the current a-Si:H TFT fabrication process without introducing ion-doping and activation process and the field effect mobility of $4{\sim}5\;cm^2/V{\cdot}s$ and $0.5\;cm^2/V{\cdot}s$ for each TFT was obtained. The low power consumption, high reliability, and low photosensitivity are realized compared with amorphous silicon gate driver circuit and are demonstrated on the 14.1 inch WXGA+ ($1440{\times}900$) LCD Panel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.387-393
• /
• 2016

Threshold voltage shift has been observed from many thin-film transistors (TFTs) and the time evolution of the shift can be modeled as the stretched-exponential and -hyperbola function. These analytic models are derived from the kinetic equation for defect-creation or charge-trapping and the equation consists of only reversible reactions. In reality TFT's a shift is permanent due to an irreversible reaction and, as a result, it is reasonable to consider that both reversible and irreversible reactions exist in a TFT. In this paper the case when both reactions exist in parallel and make a combined threshold voltage shift is modeled and simulated. The results show that a combined threshold voltage shift observed from a TFT may agrees with the analytic models and, thus, the analytic models don't guarantee whether the cause of the shift is defection-creation or charge-trapping.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.480-485
• /
• 1993

Factros considered building the magnetron sputtering system for TFT LCD (thin film transistor liquid crystal display0 metallization were thin film thichnes uniformity, temperature uniformity and the pressure gradient of sputtering gas flow in vacuum chamber, base pressure, and the stability fo the carrier moving . The system was consisted of a deposition chamber, a pre-heating chamber, a RF-precleaning chamber and a load/unload lock chamber. The system was designed to handle a substrate with dimension of 400$\times$400mm. The temperautre uniformity of a heater table developed showed $250 ^{\circ}C\pm$5% accuracyon the substrate glass. A base pressure of 1.8 $\times$10-7 torr was obtained after 24 hours pumping with a cryo pump. After an aluminum target was installed in a sputtering source and the film wa sdeposited on the glass, the uniformity, reflectivity and sheet resistance of the deposited film were measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

Poly-Si Schottky barrier Thin Film Transistor (SB-TFT) is manufactured with erbium silicided source/drain. High quality poly-Si film was obtained by crystallizing the amorphous Si film with Excimer laser annealing (ELA) method. The fabricated poly-Si SB-TFT devices showed low leakage current and large on/off current ratio. Moreover, the electrical characteristics were considerably improved by 3% $H_2/N_2$ gas annealing, which is attributed to the reduction of trap states at the grain boundaries and interface trap states at gate oxide/poly-si channel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.347.2-347.2
• /
• 2014

최근, 비정질 산화물 반도체 thin film transistor (TFT)는 수소화된 비정질 실리콘 TFT와 비교하여 높은 이동도와 큰 on/off 전류비, 낮은 구동 전압을 가짐으로써 빠른 속도가 요구되는 차세대 투명 디스플레이의 TFT로 많은 연구가 진행되고 있다. 한편, 기존의 Thin-Film-Transistor 제작 시 우수한 박막을 얻기 위해서는 $500^{\circ}C$ 이상의 높은 열처리 온도가 필수적이며 이는 유리 기판과 플라스틱 기판에 적용하는 것이 적합하지 않고 높은 온도에서 수 시간 동안 열처리를 수행해야 하므로 공정 시간 및 비용이 증가하게 된다는 단점이 있다. 이러한 점을 극복하기 위해 본 연구에서는 간단하고, 낮은 제조비용과 대면적의 박막 증착이 가능한 용액공정을 통하여 박막 트랜지스터를 제작하였으며 thermal 열처리와 microwave 열처리 방식에 따른 전기적 특성을 비교 및 분석하고 각 열처리 방식의 열처리 온도 및 조건을 최적화하였다. P-type bulk silicon 위에 산화막이 100 nm 형성된 기판에 spin coater을 이용하여 Al-Zn-Sn-O 박막을 형성하였다. 그리고, baking 과정으로 $180^{\circ}C$의 온도에서 10분 동안의 열처리를 실시하였다. 연속해서 Photolithography 공정과 BOE (30:1) 습식 식각 과정을 이용해 활성화 영역을 형성하여 소자를 제작하였다. 제작 된 소자는 Junctionless TFT 구조이며, 프로브 탐침을 증착 된 채널층 표면에 직접 접촉시켜 소스와 드레인 역할을 대체하여 동작시킬 수 있어 전기적 특성을 간단하고 간략화 된 공정과정으로 분석할 수 있는 장점이 있다. 열처리 조건으로는 thermal 열처리의 경우, furnace를 이용하여 $500^{\circ}C$에서 30분 동안 N2 가스 분위기에서 열처리를 실시하였고, microwave 열처리는 microwave 장비를 이용하여 각각 400 W, 600 W, 800 W, 1000 W로 15분 동안 실시하였다. 그 결과, furnace를 이용하여 열처리한 소자와 비교하여 microwave를 통해 열처리한 소자에서 subthreshold swing (SS), threshold voltage (Vth), mobility 등이 비슷한 특성을 내는 것을 확인하였다. 따라서, microwave 열처리 공정은 향후 저온 공정을 요구하는 MOSFET 제작 시의 훌륭한 대안으로 사용 될 것으로 기대된다.