• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.869-875
• /
• 2017

Using TCAD simulation, performances of tunnel field-effect transistors (TFETs) was investigated. Drain current-gate voltage types of TFET structure such as single-gate TFET (SG-TFET), double-gate TFET (DG-TFET), L-shaped TFET (L-TFET), and Pocket-TFET (P-TFET) are simulated, and then as dielectric constant of gate oxide and channel length are varied their subthreshold swing (SS) and on-current ($I_{on}$) are compared. On-currents and subthreshold swings of the L-TFET and P-TFET structures with high electric constant and line tunneling were 10 times and 20 mV/dec more than those of the SG-TFET and DG-TFET using point tunneling, respectively. Especially, it is shown that hump effect which dominant current element changes from point tunneling to line tunneling, is disappeared in P-TFET with high-k gate oxide such as $HfO_2$. The analysis of 4 types of TFET structure provides guidelines for the design of new types of TFET structure which concentrate on line tunneling by minimizing point tunneling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.445-447
• /
• 2016

Performance comparison between Tunneling Field-Effect Transistors (TFETs) was examined when three types of device parameter of double-gate TFET (DG-TFET) and single-gate TFET (SG-TFET) are varied. When the channel length is over 30 nm, silicon thickness is below 20 nm, and a gate insulator thickness decreases, the performance of $I_{on}$ and SS in SG-TFETs and DG-TFETs enhances. It shows that the performance of the DG-TFETs is improved than that of SG-TFETs at three types of device parameter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.224-236
• /
• 2013

This work presents a comparative study of four Double Gate tunnel FET (DG-TFET) architectures: conventional p-i-n DG-TFET, p-n-p-n DG-TFET, a gate dielectric engineered Heterogate (HG) p-i-n DG-TFET and a new device architecture with the merits of both Hetero Gate and p-n-p-n, i.e. HG p-n-p-n DG-TFET. It has been shown that, the problem of high gate capacitance along with low ON current for a p-i-n TFET, which severely hampers the circuit performance of TFET can be overcome by using a p-n-p-n TFET with a dielectric engineered Hetero-gate architecture (i.e. HG p-n-p-n). P-n-p-n architecture improves the ON current and the heterogeneous dielectric helps in reducing the gate capacitance and suppressing the ambipolar behavior. Moreover, the HG architecture does not degrade the output characteristics, unlike the gate drain underlap architecture, and effectively reduces the gate capacitance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.616-618
• /
• 2016

Four types of structure of tunnel field-effect transistors (TFETs) have been investigated by TCAD simulation. Pocket and L-shaped TFETs are better performance than single-gate and double-gate TFETs in terms of on-current and subthreshold swing. New guideline of TFETs is presented for the structure design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.527-528
• /
• 2017

Current-voltage characteristics of source-overlapped gate tunnel field-effect transistor (SOG-TFET) with different channel doping concentration are proposed. Due to the gaussian doping in which the channel region near the source is highly doped and that far from the source is lightly doped, the ambipolar current was reduced, compared with the uniformly-doped SOG-TFET. On-current is almost similar in P-P-N and P-I-N structure but subthreshold swing (SS) of P-P-N TFET enhanced 5 times higher than those of P-I-N TFET. off-current and ambiploar current of the proposed SOG-TFET decrease 10 times and 100 times than those of the uniformly-doped SOG-TFET.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.141-146
• /
• 2017

In this letter, we propose the use of tunneling field effect transistors (TFET) as a biosensor that detects bio-molecules on the gate oxide. In TFET sensors, the charges of target molecules accumulated at the surface of the gate oxide bend the energy band of p-i-n structure and thus tunneling current varies with the band bending. Sensing parameters of TFET sensors such as threshold voltage ($V_t$) shift and on-current ($I_D$) change are extracted as a function of the charge variation. As a result, it is found that the performances of TFET sensors can surpass those of conventional FET (cFET) based sensors in terms of sensitivity. Furthermore, it is verified that the simultaneous sensing of two different target molecules in a TFET sensor can be performed by using the ambipolar behavior of TFET sensors. Consequently, it is revealed that two different molecules can be sensed simultaneously in a read-out circuit since the multi-sensing is carried out at equivalent current level by the ambipolar behavior.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.876-884
• /
• 2017

The current-voltage characteristics of Silicon(Si), Germanum(Ge), and hetero tunnel field-effect transistors(TFETs) with source-overlapped gate structure was investigated using TCAD simulations in terms of tunneling. A Si-TFET with gate oxide material $SiO_2$ showed the hump effects in which line and point tunneling appear simultaneously, but one with gate oxide material $HfO_2$ showed only the line tunneling due to decreasing threshold voltage and it shows better performance than one with gate oxide material $SiO_2$. Tunneling mechanism of Ge and hetero-TFETs with gate oxide material of both $SiO_2$ and $HfO_2$ are dominated by point tunneling, and showed higher leakage currents, and Si-TFET shows better performance than Ge and hetero-TFETs in terms of SS. These simulation results of Si, Ge, and hetero-TFETs with source-overlapped gate structure can give the guideline for optimal TFET structures with non-silicon channel materials.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.635-640
• /
• 2016

Tunnel field-effect transistor (TFET) is a promising candidate for the next-generation electron device. However, technical issues remain for their practical application: poor current drivability, shor-tchannel effect and ambipolar behavior. We propose herein a novel recessed-channel TFET (RTFET) with the asymmetric source and drain. The specific design parameters are determined by technology computer-aided design (TCAD) simulation for high on-current and low S. The designed RTFET provides ${\sim}446{\times}$ higher on-current than a conventional planar TFET. And, its average value of the S is 63 mV/dec.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.240-242
• /
• 2013

In this paper, novel Carbon Nanotube Gate-Elongated Tunneling Field Transistor(CNT G-E TFET) is proposed. This proposed device is designed to decrease off-current around 2~6 orders of magnitude compared to the gate-channel size matched TFET. Mechanism of CNT G-E TFET creates additional steps in energy band structure so that off-current can be reduced. Since CNT TFETs show a great probability for tunneling processes and they are beneficial for the overall device performance in terms of switching speed and power consumption, CNT G-E TFET looks pretty much promising.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2014-2020
• /
• 2017

A compact current model applicable to both single-gate (SG) and double-gate (DG) tunneling field-effect transistors (TFETs) is presented. The model is based on Kane's band-to-band tunneling (BTBT) model. In this model, the well-known and previously-reported quasi-2-D solution of Poisson's equation is used for the surface potential and length of the tunneling path in the tunneling region. An analytical tunneling current expression is derived from expressions of derivatives of local electric field and surface potential with respect to tunneling direction. The previously reported correction factor with three fitting parameters, compensating for superlinear onset and saturation current with drain voltage, is used. Simulation results of the proposed TFET model are compared with those from a technology computer-aided-design (TCAD) simulator, and good agreement in all operational bias is demonstrated. The proposed SG/DG-TFET model is developed with Verilog-A for circuit simulation. A TFET inverter is simulated with the Verilog-A SG/DG-TFET model in the circuit simulator; the model exhibits typical inverter characteristics, thereby confirming its effectiveness.