• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.470-476
• /
• 2008

In this paper, we describe the cause of TDMA noise and distinction method of TDMA noise source in a GSM mobile phone. The causes of TDMA noise are composed of RF(Radio Frequency) energy coupling and low frequency energy coupling by burst ripple. We propose the distinction method of TDMA noise source from output(TDMA noise measurement) and frequency response of a system(audio path). Especially we propose a method of insertion loss($S_{21}$) analysis and the improvement method for RF energy coupling. Capacitor(40 pF) is a solution to reduce RF energy coupling and therefore TDMA noise was reduced by 10 dB.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.406-411
• /
• 2009

In this paper, we study the method of noise analysis for analysing TDMA noise in a GSM mobile phone and describe the cause of TDMA noise. And we reduced noise by 9dB, 3.5dB, 6dB, using MIC shielding, equipped bead or capacitance, connected PCB ground based on the difference analysis method, which is one of common noise analysis methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.639-644
• /
• 2001

Sequence Code Division Multiple Access) and TDMA(Time Division Multiple Access) system. In this system, the narrowband TDMA signals can cause intolerant interferences to CDMA signals. In this paper, DS-CDMA/TDMA frequency sharing system have been analyzed in AWGN(Additive white Gaussian Noise), MAI (Multi Access Interference) and NI(Narrowband Interference) environment. Also, performance improvement has been obtained by adopting an adaptive notch filtering scheme using complex filter bank and CCI canceller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.1-11
• /
• 2005

S-CDMA is the advanced physical layer modulation techniques of DOCSIS 2.0 specification. S-DMT is another challenging modulation technique for cable modem upstream channel due to the intrinsic robustness for fading and impulse noise. The BER performance of S-DMT and S-CDMA over the mixed channel model of AWGN and impulse noise were evaluated in comparison with TDMA. The mathematical BER derivation and the comparison of those three types of technique were performed based on the ${\varepsilon}-mixture$ non-Gaussian impulse noise model. The results of simulation show good compliance with those of analytic BER derivation. By the results of comparisons, it was verified that the performance of S-CDMA and S-DMT is almost the same, but the performance of S-DMT is far superior to that of TDMA at typical BER range of the practical data communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1422-1430
• /
• 2000

S(Synchronous)-CDMA is a new cable modem technology applicable to the upstream channel for high speed multimedia communication using CATV networks. In this paper we analyze the transmitting and receiving process of S-CDMA scheme based on Terayon patent and derive bit error probability of S-CDMA and TDMA scheme in the $\varepsilon$-mixture impulse noise model which appropriately reflects impulse noise characteristics of upstream channel by using various parameters. This analysis results are a good match with the simulation results. We also compare Eb/No gain performance of S-CDMA with TDMA in 16, 32, 64, QAM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1631-1641
• /
• 2012

A TDMA system in satellite communication has been utilized. Especially DVB-S2 was standardized and now operated in satellite broadcasting system. In this paper, we propose a TDMA frame structure appropriate for special purpose which has the good reliablilty in a poor RF environment even if frequency efficiency is decreased. TDMA frame duration is 12 seconds which is long duration in comparison with general TDMA system with several ms. Designing the frame structure, time and frequency shift in single frame duration are considered. Simulation results show that the proposed frame structure and synchronization method has robust synchronization performance when the terminal is even in low SNR as well as 25 kHz frequency offsets.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.186-193
• /
• 2008

A two-hop multiple-input multiple-output (MIMO) relay network which comprises a multiple antenna source, an amplify-and-forward MIMO relay and many potential users are studied in this paper. Consider the achievable sum rate as the performance metric, a joint design method for the processing units of the BS and relay node is proposed. The optimal structures are given, which decompose the multiuser MIMO relay channel into several parallel single-input single-output relay channels. With these structures, the signal-to-noise ratio at the destination users is derived; and the power allocation is proved to be a convex problem. We also show that high sum rate can be achieved by pairing each link according to its magnitude. The sum rate of three broadcast strategies, time division multiple access (TDMA) to the strongest user, dirty paper coding (DPC), and beamforming (BF) are investigated. The sum rate bounds of these strategies and the sum capacity (achieved by DPC) gain over TDMA and BF are given. With these results, it can be easily obtained that how far away TDMA and BF are from being optimal in terms of the achievable sum rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.257-269
• /
• 2003

S(Synchrous)-DMT(Discrete Multi Tone) is an emerging cable modem technology applicable to the upstream channel for high speed multimedia communication. In this paper we analyze the transmitting and receiving process of S-DMT scheme and derive bit error probability of S-DMT scheme in the $\varepsilon$-mixture impulse noise model which appropriately reflects impulse noise model which approproately reflects impulse noise characteristics of upstream channel. The analysis results show a good match with the simulation results. We also compare Eb/No gain performance of S-DMT with TDMA in 16-, 32-, 64-QAM.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.31-37
• /
• 2008

A Wibro RF down converter of 2.3GHz band is designed and implemented in this paper. The problems that can occur in the receiver LNA(Low Noise Amplifier) to minimize additional purposes. In addition, 2.3GHz band from the 75 MHz downward to minimize the losses in the process, transform and improve efficiency, and achieve stable characteristics can be used to make high frequency characteristics of the device. Wibro repeater uses a TDMA(Time Division Multiplexing Access) method is needed because the RF switch. Production criterion specification, the input voltage from +8 V 1.2A of current consumption, 60dB gain and the noise figure of less than 2.5dB, VSWR(Voltage Standing Wave Ratio) less than 1.5, more than IMD(Inter Modulation Distortion) 60dB satisfied. Environmental conditions ($-20^{\circ}C$ to $70^{\circ}C$) to pass the test of reliability in a long time, that seemed crafted Wibro down converter be applied to the Wibro repeater.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.99-107
• /
• 2009

Visible Light Communication (VLC) is a promising wireless communication technology. It offers huge, worldwide available and free bandwidth without electro-magnetic interference, which makes it very attractive for RF-sensitive operating environments. We propose colored LED-based VLC system for hospital use which includes voice recognition system for operating the medical equipments. New Mr hlation Scheme based on the Light Color Space is suggested to overcome the effect of noise generated by background light. Different color space constellations for different symbol sizes are also suggested which would give better bit error rate performance. Finally, Slotted ALOHA or TDMA medium access control protocols are suggested for multi-user operations.