• Earthquakes and Structures
• /
• v.19 no.4
• /
• pp.303-313
• /
• 2020

Spacious experimental and numerical investigation has been conducted by researchers to increase the ductility and energy dissipation of concentrically braced frames. One of the most widely used strategies for increasing ductility and energy dissiption, is the use of energy-absorbing systems. In this regard, the cyclic behavior of a chevron bracing frame system equipped with multi-pipe dampers (CBF-MPD) was investigated through finite element method. The purpose of this study was to evaluate and improve the behavior of the CBF using MPDs. Three-dimensional models of the chevron brace frame were developed via nonlinear finite element method using ABAQUS software. Finite element models included the chevron brace frame and the chevron brace frame equipped with multi-pipe dampers. The chevron brace frame model was selected as the base model for comparing and evaluating the effects of multi-tube dampers. Finite element models were then analyzed under cyclic loading and nonlinear static methods. Validation of the results of the finite element method was performed against the test results. In parametric studies, the influence of the diameter parameter to the thickness (D/t) ratio of the pipe dampers was investigated. The results indicated that the shear capacity of the pipe damper has a significant influence on determining the bracing behavior. Also, the results show that the corresponding displacement with the maximum force in the CBF-MPD compared to the CBF, increased by an average of 2.72 equal. Also, the proper choice for the dimensions of the pipe dampers increased the ductility and energy absorption of the chevron brace frame.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.77-88
• /
• 2015

In this paper, we consider a two-agent single-machine scheduling problem with exponential job-dependent position-based learning effects. The objective is to minimize the total weighted completion time of one agent with the restriction that the makespan of the other agent cannot exceed an upper bound. First, we propose a branch-and-bound algorithm by developing some dominance /feasibility properties and a lower bound to find an optimal solution. Second, we design an efficient simulated annealing (SA) algorithm to search a near optimal solution by considering six different SAs to generate initial solutions. We show the performance superiority of the suggested SA using a numerical experiment. Specifically, we verify that there is no significant difference in the performance of %errors between different considered SAs using the paired t-test. Furthermore, we testify that random generation method is better than the others for agent A, whereas the initial solution method for agent B did not affect the performance of %errors.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.3
• /
• pp.29-36
• /
• 2014

Properties of school foundation are divided into fundamental property for education and fundamental property for profit. As school sites and teachers used for educational and study activities of students, fundamental property for education includes practice sites, farms and support research attached facilities in addition to school facilities. According to the Clause 1 of Article 4 of the University Foundation and Management Regulation and the Attached Table 2 of the Same Regulation, dormitory is classified as property for education(non-profit). In other words, there is no need to create profit for dormitory management. It is supposed that there are little regional differences in construction cost of dormitory with general specifications. In this case, boarding fees of university dormitories should make no difference. This study analyzed boarding fees, depending on regional factors(Seoul, Gyeonggi-do, metropolitan cities and provinces), and depending on foundation subjects(national public university and private university), classes(four-year university and college) and principal schools-branch schools. The result of One-Way ANOVA showed that Seoul showed the highest average boarding fee and it was followed by Gyeonggi-do, metropolitan cities and provinces. Also, the average boarding fees of private universities and four-year universities were higher than national public universities and than colleges, respectively. In addition, branch school's boarding fee was higher than principal school's. Additionally, this study extracted a model using the hedonic model to see how various characteristics such as region, foundation subject and class influence the boarding fee. This study would serve as fundamental research on the boarding fee. Thus far, there have been difficulties in obtaining accurate data and analyzing boarding fees, since there is no open data about dormitories and it isn't mandatory to open it, but it is anticipated that this would be used as fundamental research for estimating and analyzing boarding fees of many universities in the future.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.36-45
• /
• 2004

This study was conducted to formulate management guidelines for monumental old trees in Korea through analysis of growing environments. A total of 20 old trees designated as natural monuments in Seoul, Incheon, and Gyeonggi provinces were surveyed for biological characteristics, surrounding environments, root collar conditions, tree health, and soil characteristics. Relationships among root collar conditions, tree health, and soil characteristics were analyzed by correlation. The old solitary trees designated as natural monuments included Pinus bungeana(4 trees), Juniperus chinensis(3 trees), Ginkgo biloba(3 trees), Poncirus trifoliata(2 trees), Actinidia arguta, Wisteria floribunda, Thuja orientalis, Quercus variabilis, Sophora japonica, Fraxinus rhynchophylla, Zelkova serrata, and Pinus densiflora. The tree height ranged from 3.56 to 67m, and root collar diameter ranged from 1.01 to 15.2m. The monumental old trees were growing on the various sites ranging from gardens, historical sites, open agricultural fields, mountain hills, to near the ocean beaches and streams. The coverage of bald land ranged from 50 to 100%, and depth of filled soil around the root collar ranged from 0 to 50cm. Tree health was expressed as the amount of branch dieback, cavity development, detachment of cambial tissue, infliction by diseases and insects. The branch dieback ranged from 5 to 20%, cavity development ranged from 10 to 100$cm^3$, detachment of cambial tissue ranged from 5 to 45%, and infliction by diseases and insects ranged from 5 to 20%. Soil pH ranged from 5.9 to 8.3, organic matter contents from 12 to 56%, phosphorus contents from 104 to 618ppm, while soil compaction ranged from 7 to 28mm. Results of correlation analysis showed that coverage of bald land was the most serious factor to deteriorate the cavity development and detachment of cambial tissue. In addition, chemical properties of soils seemed to be related to the health of the trees.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2775-2781
• /
• 2011

Urban Transit Train Radio is Radio Communication system that is used official business as leading motive for train safety running among the train crew and the central control center and drive-caring-chamber on main line and branch line. This system is operated that organizes talking path on handset of terminal after the train crew receives audio and understands call voice on speaker of terminal at calling the train of the central control center. When the central control center calls the specific train uses all call radio form, the train crew doesn't recognize the call cause the train situation, noise and action as train control. So there is a delay response cause reset call at the central control center. This research discusses the management of subway radio system and describes the call the train system that recognize train call number of all-call used between the central control center and the train crew.

• Structural Engineering and Mechanics
• /
• v.9 no.4
• /
• pp.323-338
• /
• 2000

An analytical approach for the prediction of the behaviour of steel-fiber reinforced concrete beams subjected to torsion is described. The analysis method employs a special stress-strain model with a non-linear post cracking branch for the material behaviour in tension. Predictions of this model for the behaviour of steel-fiber concrete in direct tension are also presented and compared with results from tests conducted for this reason. Further in this work, the validation of the proposed torsional analysis by providing comparisons between experimental curves and analytical predictions, is attempted. For this purpose a series of 10 steel-fiber concrete beams with various cross-sections and steel-fiber volume fractions tested in pure torsion, are reported here. Furthermore, experimental information compiled from works around the world are also used in an attempt to establish the validity of the described approach based on test results of a broad range of studies. From these comparisons it is demonstrated that the proposed analysis describes well the behaviour of steel-fiber concrete in pure torsion even in the case of elements with non-rectangular cross-sections.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.63-66
• /
• 2003

Thermoforming of fiber reinforced thermoplastic (FRTP) braided tubes was studied as a new forming technique. FRTP braided tubes with four plies are fabricated by the pressure bonding method are used in thermoforming. Bulge forming, bending process, pipe fittings and FE analysis are carried out in this study. In bulge forming the composite tube can be expanded up to about two times initial diameter. The suggested bending process can be obtained bent products with various bending radii. In pipe fitting it is possible to fabricate T-shape fitting, cross fitting and two-branch fitting. These results exhibit developed forming processes become useful processes for textile composite tubes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1097-1104
• /
• 2003

The current study analyzes Langmuir slip boundary condition theoretically and it is tested in practical numerical analysis for separation-associated flow. Slip phenomenon at the channel wall is properly implemented by various numerical slip boundary conditions including Langmuir slip model. Compressible backward-facing step flow is compared to other analysis results with the purpose of diatomic gas Langmuir slip model validation. The numerical solutions of pressure and velocity distributions where separation occurs are in good agreement with other numerical results. Numerical analysis is conducted for Reynolds number from 10 to 60 for a prediction of separation at T-shaped micro manifold. Reattachment length of flows shows nonlinear distribution at the wall of side branch. The Langmuir slip model predicts fairly the physics in terms of slip effect and separation.

• MALSORI
• /
• v.55
• /
• pp.1-14
• /
• 2005

Sasang Constitution, one branch of oriental medicine, claims that people can be classified into four different 'constitutions:' Taeyang, Taeum, Soyang, and Soeum. This study investigates whether the classification of the constitutions could be accurately made solely based on people's voice by analyzing the data from 46 different voices whose constitutions were already determined. Seven source-related parameters and four filter-related parameters were phonetically analyzed and the GMM(Gaussian mixture model) was tried on the data. Both the results from phonetic analyses and GMM showed that all the parameters (except one) failed to distinguish the constitutions of the people successfully. And even the single exception, B2 (the bandwidth of the second formant) did not provide us with sufficient reasons to be the source of distinction. This result seems to suggest one of the two conclusions: either the Sasang Constitutions cannot be substantiated with phonetic characteristics of peoples' voices with reliable accuracy, or we need to find yet some other parameters which haven't been conventionally proposed.