• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.110-122
• /
• 2020

Many companies make considerable efforts in implementing supply chain management systems to increase their competitiveness. In particular, there are significant investments in their ICT (Information and Communication Technology) and supply chain. However, considerable diversity exists in how well firms have been able to assimilate ICT and leverage the business value of it. In addition, studies on supply chains, particularly Real Time Enterprise (RTE) competence, which is cited for rapid information sharing and dynamic capabilities for each role in the supply chain, are insufficient. The purpose of this paper is to explore and evaluate effect of ICT utilization capabilities, including 'ICT internal cooperative capabilities' and 'ICT operational flexibility capabilities', on RTE capabilities (flexibility, visibility and prediction) and supply chain performance. To validate the research model proposed in the study, survey was conducted on companies using ICT along the supply chain of manufacturing industries. 216 data were used, SPSS and AMOS were used for the analysis methods. Study results showed that ICT internal collaboration capabilities affect agility, one of RTE capabilities, but not visibility and prediction, and ICT operational flexibility capabilities have affected all three RTE capacities. And, RTE capabilities had a huge impact on supply chain performance as expected. In this paper, it has been found that the ICT capabilities in manufacturing are an important factor in improving RTE capabilities that are important in the supply chain and improving the performance of the supply chain.

• 한국농공학회논문집
• /
• 제59권1호
• /
• pp.31-43
• /
• 2017

Recent studies about irrigation water use have focused on agricultural reservoir operation in irrigation period. At the same time, it is significant to store water resource in reservoir during non-irrigation period in order to secure sufficient water in early growing season. In this study, Representative Concentration Pathways (RCP) 4.5, 8.5 scenarios with the Global Climate Model (GCM) of The Second Generation Earth System Model (CanESM2) were downscaled with bias correlation method. Cumulative precipitation during non-irrigation season, October to March, was analyzed. Interaction between cumulative precipitation and carry-over storage was analyzed with linear regression model for ten study reservoirs. Using the regression model, reservoir drought response ability was evaluated with expression of excess and deficiency. The results showed that future droughts will be more severe than past droughts. Especially in case of non-exceedance probability of 10%, drought in southern region seemed to be serious. Nine study reservoirs showed deficiency range from 10% to 55%, which turned out to be vulnerable for future drought. Only Jang-Chan reservoir was secure for early growing season in spite of drought with deficiency of 8% and -2%. The results of this study represents current agricultural reservoirs have vulnerability for the upcoming drought.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3602-3610
• /
• 2013

현대 무기체계는 첨단화와 복잡성의 증가로 시스템개발 실패 사례가 빈번하게 발생하고 있다. 사례분석결과 원인은 원래의 시스템 운용개념을 충족시키지 못하거나 미성숙 기술의 적용 등으로 파악되었다. 이에 방위사업청에서는 무기체계개발시 핵심요구성능으로서 작전운용성능의 충족을 요구하고 있다. 한편 시스템개발시의 위험관리 방법중의 하나로서 기술성숙도 평가가 사용되어 왔는데, 이것은 개별기술에 대한 평가방법이므로, 시스템 수준에서의 기술간 통합에 대해서는 미흡하다. 이를 보완하기 위해 시스템 성숙도 평가 모델이 제시되었고, 이와는 별도로 시스템개발의 난이도의 도입을 통한 리스크 관리 모델이 제시되었다. 하지만 기술간 통합의 효과와 시스템개발 난이도를 동시에 고려한 모델은 제시되지 않았다. 또한 무기체계개발의 궁극적인 목표인 작전운용성능 충족의 관점에서 도출된 평가모델은 제시되지 못하였다. 따라서 본 연구에서는 무기체계개발에서 작전운용성능을 충족시키면서 리스크 관리를 수행하기 위한 방법으로, 요소기술간 통합과 시스템개발 난이도를 동시에 고려한 시스템 성숙도 평가 모델을 구축하였다. 또한 무기체계 연구개발단계에서 개선된 시스템 성숙도 평가모델을 적용할 수 있는 방법을 제시하였다.

• ETRI Journal
• /
• 제21권4호
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3754-3767
• /
• 2023

Turbulent jet discharges in subcooled water pools are essential for safety systems in nuclear power plants, specifically in the pressure suppression pool of boiling water reactors and In-containment Refueling Water Storage Tank of advanced pressurized water reactors. The gas and liquid flow in these systems is investigated using multiphase flow analysis. This field has been extensively examined using a combination of experiments, theoretical models, and Computational Fluid Dynamics (CFD) simulations. ANSYS CFX offers two approaches to model multiphase flow behavior. The non-homogeneous Eulerian-Eulerian Model has been used in this work; it computes global information and is more convenient to study interpenetrated fluids. This study utilized the Large Eddy Simulation Model as the turbulence model, as it is better suited for non-stationary and buoyant flows. The CFD results of this study were validated with experimental data and theoretical results previously obtained. The figures of merit dimensionless penetration length and the dimensionless buoyancy length show good agreement with the experimental measurements. Correlations for these variables were obtained as a function of dimensionless numbers to give generality using only initial boundary conditions. CFD numerical model developed in this research has the capability to simulate the behavior of non-condensable gases discharged in water.

• 산업경영시스템학회지
• /
• 제45권1호
• /
• pp.20-30
• /
• 2022

In this study, in order to confirm the relationship between technical innovation competence and corporate performance, the effect of technical innovation competence of small and medium-sized manufacturing companies on corporate performance was identified, and entrepreneurship, which plays a role as a driving force in triggering technical innovation competence, was analyzed to determine whether there is a mediating effect between them. To conduct the research, first, the research model was established by examining previous studies on technical innovation competence, entrepreneurship, and corporate performance. Second, an on-line and offline survey was conducted for employees in companies after constructing a questionnaire that can verify the hypothesis suitable for the research model. Third, the hypothesis was verified by performing validity and reliability analysis, correlation analysis, and regression analysis using a statistical program. Results of this study, first, it was found that R&D competence and technology innovation system, which are elements of technical innovation competence, had a significant effect on financial performance, and technology innovation system and technology accumulation capacity, had a significant effect on non-financial performance. Second, it was analyzed that entrepreneurship has a mediating effect in both R&D capability, technological innovation system and technology accumulation capability, which are elements of technical innovation capability, and financial and non-financial performance, elements of corporate performance.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.9-21
• /
• 2011

Assuming that the Capability Maturity Model Integration for Development v1.2 (CMMI) could be applied to an organization more effectively if the content similarities among practices were improved in terms of structure and composition, this paper presents the analysis of the correlations between the CMMI Specific Practices (SP) and Generic Practices (GP) for the Maturity Level 2 and 3 Process Areas using the Chi-square independence test. According to the analysis, a 22.2% correlation was observed. To minimize the problem of repeatedly applying similarities, 6 GPs that are highly correlated with the SPs were grouped together. Then, three different improvement plans: 1) development of a standard template-based project plan, 2) establishment of a configuration management system based on open source software to control work products and leverage experience, and 3) establishment of project assurance through an independent quality assurance-based organization and intensive review by higher-level management - were defined.

• 품질경영학회지
• /
• 제34권3호
• /
• pp.1-18
• /
• 2006

CMMI(Capability Maturity Model Integration) has been recognized as a critical method to validate the competitiveness of software development organization since its introduction. CMMI imposes additional requirements on the software development organization which has been established and certified to the ISO 9001 quality management system. This paper reviews the similarities and differences between CMMI and ISO 9001. This paper also examines what ate required to deploy the CMMI on the aircraft software development organization which has been certified to ISO 9001. The results of this study will help software development organization to provide the direction for implementing CMMI. Some suggestions are presented to identify and strengthen the weak portion of the software process quality management system.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.421-431
• /
• 2023

Nuclear power plants (NPPs) have technical specifications (Tech Specs) to ensure that the equipment and key operating parameters necessary for the safe operation of the power plant are maintained within limiting conditions for operation (LCO) determined by a safety analysis. The LCO of Tech Specs that identify the lowest functional capability of equipment required for safe operation for a facility must be complied for the safe operation of NPP. There have been previous studies to aid in compliance with LCO relevant to rule-based expert systems; however, there is an obvious limit to expert systems for implementing the rules for many situations related to LCO. Therefore, in this study, we present a retrieval methodology for similar LCO cases in determining whether LCO is met or not met. To reflect the natural language processing of NPP features, a domain dictionary was built, and the optimal term frequency-inverse document frequency variant was selected. The retrieval performance was improved by adding a Boolean retrieval model based on terms related to the LCO in addition to the vector space model. The developed domain dictionary and retrieval methodology are expected to be exceedingly useful in determining whether LCO is met.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3621-3640
• /
• 2016

In the process of k-coverage of the target node, there will be a lot of data redundancy forcing the phenomenon of congestion which reduces network communication capability and coverage, and accelerates network energy consumption. Therefore, this paper proposes a novel energy balanced k-coverage control algorithm based on probability model (EBKCCA). The algorithm constructs the coverage network model by using the positional relationship between the nodes. By analyzing the network model, the coverage expected value of nodes and the minimum number of nodes in the monitoring area are given. In terms of energy consumption, this paper gives the proportion of energy conversion functions between working nodes and neighboring nodes. By using the function proportional to schedule low energy nodes, we achieve the energy balance of the whole network and optimizing network resources. The last simulation experiments indicate that this algorithm can not only improve the quality of network coverage, but also completely inhibit the rapid energy consumption of node, and extend the network lifetime.