• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.31-38
• /
• 2008

This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.620-626
• /
• 2019

In this study, the effects of the structural properties of the catalyst on CO oxidation reaction by controlling the $Cu/CeO_2$ catalyst amount and calcination temperature were studied, and also the CO conversion rate of the catalyst at the temperature range of $100{\sim}300^{\circ}C$ was evaluated. XRD, Raman, BET, $H_2-TPR$, and XPS analyses were performed to confirm the effect of changes in the structural properties on the chemical properties of the catalyst. The result confirmed that a substitution bond between Cu and Ce was formed and a lot of Cu and Ce bonds were formed when the catalyst carrying 5 wt.%. Of Cu was calcined at $400^{\circ}C$. The Cu-Ce binding was confirmed by peak shifts in Raman analysis and also peaks appeared in $H_2-TPR$. In addition, the balance state analysis demonstrated that a lot of surface labile oxygen molecules are formed, which can be more easily contributed to the reaction with $Ce^{3+}$ species known to form a substitution bond easily. It was found that CO conversion rate of the catalyst used in this study was close to 100% at $150^{\circ}C$.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.63-71
• /
• 2020

In this paper, we propose a fire detection technology using YOLOv3 and EfficientDet, the most reliable artificial intelligence detection algorithm recently, an alert service that simultaneously transmits four kinds of notifications: text, web, app and e-mail, and an AWS system that links fire detection and notification service. There are two types of our highly accurate fire detection algorithms; the fire detection model based on YOLOv3, which operates locally, used more than 2000 fire data and learned through data augmentation, and the EfficientDet, which operates in the cloud, has conducted transfer learning on the pretrained model. Four types of notification services were established using AWS service and FCM service; in the case of the web, app, and mail, notifications were received immediately after notification transmission, and in the case of the text messaging system through the base station, the delay time was fast enough within one second. We proved the accuracy of our fire detection technology through fire detection experiments using the fire video, and we also measured the time of fire detection and notification service to check detecting time and notification time. Our AI fire detection and notification service system in this paper is expected to be more accurate and faster than past fire detection systems, which will greatly help secure golden time in the event of fire accidents.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.3
• /
• pp.55-65
• /
• 2022

Recently, deep learning-based automated systems for identifying and detecting landmarks have been proposed. In order to train such a deep learning-based model without overfitting, a large amount of image and labeling data is required. Conventionally, an experienced reader manually identifies and labels landmarks in a patient's image. However, such measurement is not only expensive, but also has poor reproducibility, so the need for an automated labeling method has been raised. In addition, in the X-ray image, since various human tissues on the path through which the photons pass are displayed, it is difficult to identify the landmark compared to a general natural image or a 3D image modality image. In this study, we propose a geometric data augmentation technique that enables the generation of a large amount of labeling data in X-ray images. In addition, the optimal attention mechanism for landmark detection was presented through the implementation and application of various attention techniques to improve the detection performance of 16 major landmarks in the skull. Finally, among the major cranial landmarks, markers that ensure stable detection are derived, and these markers are expected to have high clinical application potential.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.39-49
• /
• 2015

Since most medical facilities and medical personnel are concentrated in urban areas in South Korea, an imbalance of access to medical facilities causes a gap in medical resource availability between urban and rural areas. Accessibility to medical facilities is a means of assessment that evaluates a measure of inequality in utilization of medical resources. The evaluation of accessibility uses Euclidean distance, in general; however, this method has its limits in that Euclidean distance cannot reflect actual distance. This study aims to estimate real road distance from village halls to medical facilities in rural areas using Open Application Programming Interface (Open API) of an internet portal site. Using real road distance, we evaluated medical accessibility and compared it with Euclidean distance. The accessibility to primary medical institutions was valued relatively well, but secondary and tertiary medical institutions were vulnerable in Pyeonchang-gun. Comparing Euclidean distance with real road distance from village halls to medical facilities, real road distance appeared to be approximately 1.4 times that of Euclidean distance. This calculation is similar to the circuity factor of Gangwon-do in Korea that estimated to fix the limits of Euclidean distance and assumed real road distance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.107-116
• /
• 2012

In this study, the trucks(2.9-liter) have been developed to use DME as fuel, and performance test of the vehicle's DME engine, power, emissions, fuel economy and vehicle aspects was conducted. For experiments, the fuel system(common-rail injectors and high-pressure pump included) and the engine control logic was developed, and ECU mapping was performed. As a result, the rail pressure from 40MPa to approximately 65% increase compared to the base injector has been confirmed that. Also, the pump discharge flow is 15.5 kg/h when the fuel rail pressure is 400rpm(40MPa), and the pump discharge flow is 92.1 kg/h when the fuel rail pressure is 2,000rpm(40MPa). The maximum value of full-load torque capability is 25.5 kgfm(based on 2,000 rpm), and more than 90% compared to the level of the diesel engine were obtained. The DME vehicle was developed in this study, 120 km/h can drive to the stable, and calculated in accordance with the carbon-balance method of fuel consumptions is 5.7 km/L.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.181-191
• /
• 2014

Modern commercial greenhouse requires the use of advanced climate control system to improve crop production and to reduce energy consumption. As an alternative to classical sensor-based control method, this paper introduces a model-based control method that consists of two models: the predictive model and the evaluation model. As a first step, this paper presents straightforward models to predict the effect of natural ventilation in a greenhouse according to meteorological factors, such as outdoor air temperature, soil temperature, solar radiation and mean wind speed, and structural factor, opening rate of roof ventilators. A multiple regression analysis was conducted to develop the predictive models on the basis of data obtained by computational fluid dynamics (CFD) simulations. The output of the models are air temperature drops due to ventilation at 9 sub-volumes in the greenhouse and individual volumetric ventilation rate through 6 roof ventilators, and showed a good agreement with the CFD-computed results. The resulting predictive models have an advantage of ensuring quick and reasonable predictions and thereby can be used as a part of a real-time model-based control system for a naturally ventilated greenhouse to predict the implications of alternative control operation.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.57-67
• /
• 2013

This study suggests for effective operation of systematic analysis method for human factors which is based on the requirement architecture framework a requirement process to manage requirements for improvement is discussed, such as in requirements generation, database construction, management of experimental design, and management of the design traceability. For the objectives, we analyzed the method construct of the starting point views of user requirement which is adopted the requirement architecture concept to cover the whole activities required to do and the human factors guidelines and standards are suggested for verification and validation of the develop requirements. It is getting more attention as the operation of the enabling systems goes up these days. Throughout the propose of this study, human factors requirement database design presented in operational environment system for enabling system which is based on case study using a computer aided se tool. This study will be contributed to how the operational requirement database for the enabling system and operational human factors can be constructed in an integrated system design fashion.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.107-108
• /
• 2011

Since the development of railway technology, the current urban Railway the first train line in the country for safe operation control automatic/unattended operation, automatic train operation equipment available (ATO) on time and reliable operation has introduced. ATO Automatic operation controlled by the value (Target velocity) and the feedback value (Actual velocity) by the error between the backing and braking of the train by repeated low energy efficiency. In this paper, given a fixed distance stations between time operation with minimal energy in the driving characteristics and driving trains are modeled. Therefore, in line 5 real route time sectional drive straight sections for experimental data analysis / draft Section / curved and section of the train on that line is selected according to the changing driving patterns to minimize the energy optimal driving patterns were presented.