• KIEAE Journal
• /
• 제12권4호
• /
• pp.89-95
• /
• 2012

At present, many countries are trying to reduce green gas emissions to mitigate the effects of these gases on climate change. Year after year, there have been efforts to cut energy use for heating and cooling. Heating and cooling systems, common in all forms of housing, are increasing due to the constant supply of new housing resulting from improvements in economic growth and the quality of life. Thus, studies related to the design of cooling and heating systems to improve energy efficiency are expanding. Among the new designs, radiant floor cooling and heating systems which use capillary tubes are becoming viable means of reducing energy use. Radiant floor cooling and heating systems which use capillary tubes are creative and sustainable systems in which cool and hot water is circulated into capillary tube which has small diameter. In this study, the cooling and heating performance of this type of capillary tube system is investigated in an experimental study and a simulation using TRNSYS. The results of the experimental study show that under a peak load, a capillary tube radiant floor cooling system using geothermal energy can achieve desired indoor temperature without an additional heat source. The set room air temperature is maintained while the floor surface temperature, PMV and PPD remain within the comfort range. Also, this system is more economic than a packaged air conditioner system due to its higher COP. The results of the simulation show that the capillary tube radiant floor heating system maintains set temperature more stable than a PB pipe radiant floor heating system due to its lower supply temperature of hot water. In terms of energy consumption, the capillary tube radiant floor heating system is more efficient than the PB pipe radiant floor heating system.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.458-464
• /
• 2008

The structural health monitoring has been gaining more importance in civil engineering areas such as earthquake and wind engineering. The use of health monitoring system can also provide tools for the validation of structural analytical model. However, only few structures such as historical buildings and some important long bridges have been instrumented with structural monitoring system due to high cost of installation, long and complicated installation of system wires. In this paper, the structural monitoring system based on cheap and wireless monitoring system is investigated. The use of advanced technology of micro-electro-mechanical system(MEMS) and wireless communication can reduce system cost and simplify the installation. Further the application of wireless MEMS system can provide enhanced system functionality and due to low noise densities. Identification results are compared to ones using data measured from traditional accelerometers and results indicate that the system identification using wireless MEMS system estimates system parameters accurately.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.847-848
• /
• 2007

In this work, we analyze the role of reputation in ubiquitous healthcare system as well as the relationship of security, trust and reputation in this environment in details. In addition, an example is given to show how to use reputation system in ubiquitous healthcare and how to use reputation system on decision making.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.131.2-131
• /
• 2001

This paper's purpose i to obtain tracking information of an object using a camera. This system embodies to know tracking information of an object using Kalman filtering. As we use java program, it is possible to make system regardless of operating system, set up the system. We used an comfortable USB port camera everywhere without the capture board. We can use the internet by using the applet and JMF everywhere. We regard the camera as fixed.

• International Journal of Contents
• /
• 제6권3호
• /
• pp.15-18
• /
• 2010

Grid system is based on the Grid Security Infrastructure (GSI). GSI uses user's proxy to guarantee availability among multi-trust domains. Since grid system has been developed focusing on availability, GSI provides authentication and authorization performed by systems, but there are lacks of privacy consideration. For this reason, some researchers decide to use their own cluster system and do not want to use public grid systems. In this paper, we introduce a new privacy enhanced security mechanism for grid systems. With this mechanism, user can participate in resource allocation and authorization to user's contents more actively. This mechanism does not need to change previous middleware and minimize the computational overheads.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.277-277
• /
• 2000

This paper's purpose obtain information of three dimension using a camera. This system embody to know the height of object using triangle method between reference point of circumstance and object. As I use java program, it is possible to make system regardless of operating system, set up the system. By using comportable USB port camera, we used to everywhere without the capture board. We can use the internet by using the java's JMF and applet everywhere, we regard the camera as fixed.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.137-146
• /
• 1997

The simplest bit error detection scheme is to append a parity bit to the end of a bit sequence. In this paper an error correction technique with the use of a parity bit is proposed, and the performance of the proposed system is analyzed. The error probability of the proposed system is compared with the output of computer simulation of the proposed system. It is also compared with the error probability of error at BPSK system, and the signal-to-noise ratio gain is showed.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.51-63
• /
• 2001

Korea gas industrial because of received LNG in 1987 was converted by the Gas Safety Management System in relation to city gas, LPG and LNG. Gas accident were caused by treatment problem on the supplier and user, on technical and use management mater, on facilities and goods, and included problem with gas safety connection system. This study is present standard application plan of each department to use planning gas technical standard and gas utilization standard of introduction model than statute for change of self-regulation management system and complicated regulation of examination center and order.

• 한국직업건강간호학회지
• /
• 제13권1호
• /
• pp.5-18
• /
• 2004

This study aims to investigate the use state of the health service computerization system in the occupational nursing field and the occupational nursers' satisfaction level, and provide basic data to promote the development of the health service computerization system for the nursing field. For this study, a questionnaire was provided to 118 occupational nurses who belong to Busan and Gyeongnam branches of KAOHN(Korean Association of Occupational Health Nurses) for 2 months (from Dec. 1, 2002 to Jan. 31, 2003). A tool of Choi Yong-Heui(2000) was used to investigate the satisfaction level of using the health service computerization system. The collected materials were analyzed in real number and percentage, average and standard deviation, t-test and ANOVA by using the SPSS WIN 10.0 program. This study is summarized as follows: 1. The average age was $31.99{\pm}5.58$ old in this study. The married were 54.2%. Participants who graduated from a junior college was 76.9%. The average service period was $4.48{\pm}4.68$ years. In service types, 79.7% of participants served in a health care center. The average service period was $3.22{\pm}2.89$ years. The service place which had 1000 workers or more was 35.6%. 2. Only 20.3% of participants in this study had a computer use education. 3. The field who participants used mostly was communication/internet, $3.29{\pm}.85$ hours in average. 4. 97.1% of occupational fields had computers and peripheral devices: 71.4% in pentium computer, 42.8% in the hard disk capacity of 20-29GB, 60.0% in 15 inch monitors, 86.2% in printers, 18.1% in digital cameras, 12.4% in LAN, and 9.5% in scanners. 80.1% of the occupational fields which were objects of study could use communication. 5. The occupational fields which did not introduced the health service computerization system were 62.8%. The main cause was attributable to entrepreneurs' insufficient recognition 66.6%. 51.5% of the entrepreneurs did not have an introduction plan. 37.2% of participating companies had the health service computerization system. 56.4% of them introduced it since the year 2000. 81.6% of the introduction motivation aimed to the efficiency of health service. The most issue upon introduction was insufficient understanding of a person in charge - 25.6%. The in-house development of the system covered 56.4%. 61.5% of the participants accepted their demands from the first stage of development. The direct effect of computerization showed the increase of 25.9% in the quickness and continuity of service treatment, and 25.9% in the serviceability of statistical treatment. 6. 22.0% of the participants had a computerization system use education. 69.2% of them had a in-house education. An educational method by nurses who used the computerization system was 76.9%. 92.3% of the education was helpful for practical duties. 7. An analysis of the computer use by health service fields showed that the medicine management in a health management field was 15.9%. the work environment measuring management in a work environment filed was 32.9%. the employment. general and special examination management in a heal th management field was 61.1 %. the various reports management in an administrative field was 64%. the health education data preparation management in an educational field was 58.0%. and the medicine and expendables management in an equipment management field was 51.6%. An analysis of the computerization system use showed that the various statistical data manage in a health management field was 13.0%. the work environment measuring management in a health management field was 34.8%. the personal disease management in a health management field was 51.9%. the heal education data preparation management in an educational field was 54.5%. and the equipment management of health care centers in an equipment management field was 52.6%. 8. 31.6% of the participants wanted that health service computerization system would include the generals of health services. 42.4% of the participants thought that first of all. the aggressive interest and investment of employers were required to build the health service computerization system. 9. The participants' satisfaction level on the computerization system use was $3.51{\pm}.57$ points. An analysis by each factor showed $3.62{\pm}.68$ points in a service change factor. $3.15{\pm}.63$ points in a computer program use factor, and $3.45{\pm}.71$ points in a continuous computerization use factor. 10. An analysis of the computerization system use by general characteristics of participants showed that the married (p = .022) had the satisfaction level higher than the unmarried. 11. The satisfaction level of the computerization system use by participants' computer use ability tended to be higher in proportion to the increase of computer use abilities in spreadsheet (F=2.606. p=.048). presentation (F=3.62. p=.012) and communication/internet(F=2.885. p=.0321. Based on the study results mentioned above. I will suggest as follows : The nationwide enlargement and repetition study is required for occupational nurses who serve in occupational nursing fields. The computerization system in a health service field is inferior comparing with other fields. The computerization system standard by business types and characteristics should be prepared through employers's aggressive participation and national support. Therefore various statistical data which occurs in occupational fields will be managed systematically and efficiently. A regular and systematic computer education plan for occupational nurses in charge of health services in the filed is urgently required to efficiently manage and improve the health of on-site workers.

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.893-905
• /
• 2011

차세대 공용여객처리시스템(Common Use Passenger Processing Systems or CUPPS)은 국제항공운송협회(International Air Transport Association, IATA)에서 제정한 항공사의 체크인 시스템인 디씨에스(Departure Control System or DCS)와 연계하여 승객의 체크인 및 보딩(boarding) 업무를 처리하는 새로운 공용시스템 국제 표준이다. IATA는 2009년 8월 CUPPS 표준을 제정하여 2012년 11월까지 기존의 Vendor들이 개별적으로 제공하고 있던 큐트(Common Use Terminal Equipment or CUTE)를 CUPPS 로 전환할 것을 전 세계 공항과 항공사에 권고하였다. IATA는 향후 CUPPS 전환 시 항공사의 공용시스템 관련 개발 및 각종 디바이스 컨트롤의 표준화로 시스템 구축, 관리 및 유지보수 비용이 감소될 수 있을 것으로 기대하고 있다. 또한 최종 사용자인 항공사는 지금까지 각 vendor들이 제공한 각 지역 공항의 개별적인 공용 환경에 맞추어 개발하여야 했던 어플리케이션을 중복 개발하는 비용을 절감할 수 있을 것으로 예상된다. 이에 본 연구에서는 인천공항공사(IIA)에서 국토부 R&D 사업으로 추진하고 개발이 완료된 CUPPS 표준의 에어큐스(Airport-Integrated Resources Common Use System or AIRCUS)에 대해 항공사 적용시험결과, 기존 Vendor들이 제공했던 CUTE 시스템과의 성능비교결과, 그리고 AIRCUS 시스템의 해외 수출 방안을 제시한다.