• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.24-38
• /
• 2009

In this paper, we implement processor debugger based on OCD(On-Chip Debugger). Implemented debugger consist of software debugger that supports a functionality of symbolic debugging, OCD integrated into target processor as a function of debugging, and Interface & Control block which interfaces software debugger and OCD at high speed rates. The debugger supports c/assembly level debugging using software debugger as OCD is integrated into target processor. After OCD block is interfaced with 32bit RISC processor core and then implemented with FPGA, the verification of On-Chip Debugging System is carried out through connecting OCD and Interface & Control block, and SW debugger.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.514-523
• /
• 2002

Feeder arrangement is an important element of process planning for printed circuit board assembly systems. This paper newly proposes a feeder arrangement method for multihead-gantry chip mounters. The multihead-gantry chip mounters are very popular in printed circuit board assembly system, but the research has been mainly focused on single-head-gantry chip mounters. We present an integer programming formulation for optimization problem of multihead-gantry chip mounters, and propose a heuristic method to solve the large NP-complete problem in reasonable time. Dynamic programming method is then applied to feeder arrangement optimization to reduce the overall assembly time. Comparative simulation results are finally presented to verify the usefulness of the proposed method.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.133-136
• /
• 2004

This research aims to develop a DNA chip array without an indicator. We fabricated a microelectrode array through photolithography technology. Several DNA probes were immobilized on an electrode. Then, target DNA was hybridized and measured electrochemically. Cyclic-voltammograms (CVs) showed a difference between the DNA probe and mismatched DNA in an anodic peak. This indicator-free DNA chip resulted in a sequence-specific detection of the target DNA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.696-706
• /
• 2007

Multiprocessor system on chip (MPSoC) platform has set a new innovative trend for the System on Chip (SoC) design. With the rapidly approaching billion transistors era, some of the main problem in deep sub-micron technologies characterized by gate lengths in the range of 60-90 nm will arise from non scalable wire delays, errors in signal integrity and un-synchronized communication. These problems may be addressed by the use of Network on Chip (NOC) architecture for future SoC. Most future SoCs will use network architecture and a packet based communication protocol for on chip communication. This paper presents an adaptive wormhole routing with proactive turn prohibition to guarantee deadlock free on chip communication for NOC architecture. It shows a simple muting architecture with five full-duplex, flit-wide communication channels. We provide simulation results for message latency and compare results with those of dimension ordered techniques operating at the same link rates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.888-889
• /
• 2015

This paper presents a method of constructing the system-on-chip(SoC) based on embedded systems. The proposed method is more compact and effectiveness than former methods. The requirements generation start high level performance simulation and then passes to an executable specification suitable for implementation using a hardware/software co-design tool. The reuse of pre-exiting components is supported, as well as synthesis of the system interface, but only after much work is done to program the hardware/software co-design tool. The actual design flow described allows feedback among all design levels, e.g. from implementation up to requirements, throughout the process. In the future, it is necessary to development the advanced method of constructing system-on-chip based on embedded systems.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5195-5200
• /
• 2014

White LEDs are expected to be applied widely as a lighting system. To make white LED chips, one requires a mixture with silicon and a phosphor coating on a LED blue chip. The process of preparing a mixture with silicon using phosphor involves the use of discarded phosphor in the chip process. Reducing the costs of chip production depends on many factors, such as the mixture errors, exposure over time of silicon, and changes in the characteristics of blue chip. This paper reports the characteristics of a white LED chip manufactured through a reproduction process of derelict phosphor. This method was applicable to a real LED flashlight. A derelict phosphor chip showed similar results to a normal white chip for the degradation of cd 3.2[Cd] and 3.6[Cd], color temperature, 57[K] and 58[K], and maximum white wavelength 444.3[nm] and 449.8[nm]. These results are expected to make ea great contribution to cost reduction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.109.1-109
• /
• 2002

This paper presents a macro/micro flip chip mounting head system for precise force control. In the proposed macro/ micro system, the macro actuator is conventional do servomotor with a ball screw mechanism and the micro actuator is a voice coil motor(VCM) that consists of four NdFeB magnets and a winded moving coil. For force control, a sensitive strain-gauge force sensor is mounted in the micro actuator. Through harmonic motion between macro and micro actuator, we would like to get precise contact force control when small sized flip chip is mounted on flexible substrate in high speed. In order to show the effectiveness of the proposed macro/micro flip chip mounting head system, we com...

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.572-578
• /
• 2008

As the railway transportation is getting faster and its operation speed has increased rapidly, its signal control has been complicated. For real time signal processing it is very important to prohibit any critical error from causing the system to malfunction. Therefore, handling complicated signals effectively while maintaining fault-tolerance capability is highly expected in modern railway transportation industry. In this paper, we suggest an SoC (Sytem-on-Chip) design method to integrate these complicated signal controlling mechanism with fault tolerant capability in a single chip. We propose an SoC solution which contains a high performance 32-bit embedded processor, digital filters and a PWM unit inside a single chip to implement ATO's, ATC's, ATP's and ATS's digital signal-processing units. We achieve an enhanced reliability against the calculation error by adding fault tolerance features to ensure the stability of each module.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.477-480
• /
• 1995

Dccisions of optimal filling conditions for the chip encapsulation have been done primarily by an ad hoc use of expertise accumulated over the years because the chip encapsulation process is quite complicated. The current CAE systems do not provide mold designers with necessary knowledge of the chip encapsulation for the successful design of optimal filling except flow simulation capability. There have been no attempts to solve the optimal filling problem in the process of the chip encapsulation. In this paper, we have constructed an design system for optimal filling to avoid short shot in the chip encapsulation process which combines an optimization methodology with CAE software.